+7 (812) 645-08-06
Water pumping stations and lifting units
select brand
Sewage lifting unit - max. 62 m³/h, EN 120550-2 | Sanitson premium
TECHNICAL SPECIFICATIONS
Flow rates of up to : 62 m³/h
Manometric head of up to: : 25 mWC
Fluid temperature limit : +35°C
Starting frequency : Recommended: 20/h
Maximum particle size : 10 to 44 mm
Effluent inlet : DN 100
DN discharge port: : 11/2" to 21/2"
DN vent...
Flow rates of up to : 62 m³/h
Manometric head of up to: : 25 mWC
Fluid temperature limit : +35°C
Starting frequency : Recommended: 20/h
Maximum particle size : 10 to 44 mm
Effluent inlet : DN 100
DN discharge port: : 11/2" to 21/2"
DN vent...
Sewage lifting unit - max. 62 m³/h, EN 120550-2 | Sanitson premium
TECHNICAL SPECIFICATIONS
Flow rates of up to : 62 m³/h
Manometric head of up to: : 25 mWC
Fluid temperature limit : +35°C
Starting frequency : Recommended: 20/h
Maximum particle size : 10 to 44 mm
Effluent inlet : DN 100
DN discharge port: : 11/2" to 21/2"
DN vent...
Flow rates of up to : 62 m³/h
Manometric head of up to: : 25 mWC
Fluid temperature limit : +35°C
Starting frequency : Recommended: 20/h
Maximum particle size : 10 to 44 mm
Effluent inlet : DN 100
DN discharge port: : 11/2" to 21/2"
DN vent...
Sewage lifting unit - max. 28 m³/h | Liftson S
There are several technical specifications associated with this product that might be of interest for the buyers. First of all, the flow rate supported and guaranteed by the manufacturer are of up to 28 m3/h. Next, the manometric head supports...
Sewage lifting unit - max. 28 m³/h | Liftson S
There are several technical specifications associated with this product that might be of interest for the buyers. First of all, the flow rate supported and guaranteed by the manufacturer are of up to 28 m3/h. Next, the manometric head supports up to 5.2 mWC, while the passing particle size is evaluated at 40 mm. This product can operate at a maximum water temperature of 35 degrees Celsius, while lift-pumping of wastewater is possible with or without particles of fecal matter.
This product is also ideal for fitting out a shower room, bathroom, as well as additional toilets in the basement. In terms of the benefits, the one-piece tank is made of composite materials, while the compact design allows all the necessary functions of the product with minimum amount of space. The product can be easily installed behind a false wall, while all components are accessible directly and easily without needing to work in the tank.
This product is also ideal for fitting out a shower room, bathroom, as well as additional toilets in the basement. In terms of the benefits, the one-piece tank is made of composite materials, while the compact design allows all the necessary functions of the product with minimum amount of space. The product can be easily installed behind a false wall, while all components are accessible directly and easily without needing to work in the tank.
Sewage lifting unit - max. 45 m³/h | Liftson M-L
Liftson M - Lix L lift pump is specially designed for collection and lift-pumping of waste water from collective residential, tertiary and commercial buildings. The Liftson M pump offers up to 3,000 L/h inflow rate and 45/h start-up...
Sewage lifting unit - max. 45 m³/h | Liftson M-L
Liftson M - Lix L lift pump is specially designed for collection and lift-pumping of waste water from collective residential, tertiary and commercial buildings. The Liftson M pump offers up to 3,000 L/h inflow rate and 45/h start-up...
Sewage lifting unit - 690 - 970 l | SIR 1500-2500
The S.I.R. 1500-2500 series of intermediate lifting stations have an effective volume of up to 690 L or 970 L, depending on the model. The fluid temperature limit is 35 C, and the maximum particle size is 44-mm...
Sewage lifting unit - 690 - 970 l | SIR 1500-2500
The S.I.R. 1500-2500 series of intermediate lifting stations have an effective volume of up to 690 L or 970 L, depending on the model. The fluid temperature limit is 35 C, and the maximum particle size is 44-mm to 48-mm. The recommended start-up frequency is 20/h. Normal and back-up configuration options include one or two pumps. The effluent inlet is DN 200, and the vent port and discharge port are both DN 100. The regulation mode includes a fixed speed. Ideal applications include lift-pumping and collection of wastewater from commercial, residential and tertiary buildings. The easily removable base plate features automatic operation. These stations are completely sealed up to their maximum height. The bottom part of the tank contains no holes. In the event of flooding, the stations are designed to resist water pressure.
Sewage lifting unit compact - max. 16 l | FEKALIFT
Fekalift is used for small lifting stations for automatic collecting and pumping of sewage. It finds application in cases where the waste water cannot be expelled by gravity. As the lifting station is directly mounted behind the WC, it remains unaffected...
Sewage lifting unit compact - max. 16 l | FEKALIFT
Fekalift is used for small lifting stations for automatic collecting and pumping of sewage. It finds application in cases where the waste water cannot be expelled by gravity. As the lifting station is directly mounted behind the WC, it remains unaffected by the type of waste piping and unions. The lifting station provides the new building work, renovations and structural modifications with additional toilet. Based on the model, the WC can be connected with a shower, bidet and washbasin.
Th water inflow from the sanitary ware connected to the system is automatically turned on the Fekalift 100/200 during approximately 8 cm increase in water level and is automatically turned off on dropping of the level drops by approximately 3 cm. The solids and excrement released from the toilet are chopped and forced into the general waste pipe through the pressure pipe. Fekalift 100/200 can also be connected to any European standards WC with horizontal waste.
Th water inflow from the sanitary ware connected to the system is automatically turned on the Fekalift 100/200 during approximately 8 cm increase in water level and is automatically turned off on dropping of the level drops by approximately 3 cm. The solids and excrement released from the toilet are chopped and forced into the general waste pipe through the pressure pipe. Fekalift 100/200 can also be connected to any European standards WC with horizontal waste.
Sewage lifting unit - 1 - 7.2 m³/h | NOVABOX
The NOVABOX is an automatic station for carrying and collecting domestic wastewater from showers, tubs, washing machines, etc. located below sewage network level or basements. The box...
Sewage lifting unit - 1 - 7.2 m³/h | NOVABOX
The NOVABOX is an automatic station for carrying and collecting domestic wastewater from showers, tubs, washing machines, etc. located below sewage network level or basements. The box features a NOVA 300 electro-pump, as well as 5-meters of power cable and plug, 30 liter container in techno-polymer, and check valve. The power cable is mounted on a techno-polymer plate. The pump comes already assembled and ready for use. This box belongs in the motor insulation class F and has a 50 to 90 C liquid temperature range for a maximum time of three minutes. Motor protection level is IP-68. The operating range from 1 to 7.2 m3/h with a maximum head of 6.9-meters. The pumped liquid is waste water free from fibers or solids.
Sewage lifting unit - 1 - 24 m³/h | FEKABOX 110
This product series consists of high quality automatic lifting and collection stations, which are used for pumping and collecting...
Sewage lifting unit - 1 - 24 m³/h | FEKABOX 110
This product series consists of high quality automatic lifting and collection stations, which are used for pumping and collecting civil waste water in the case of sewers. The FEKABOX 110 is constructed using a polyethylene tank of 110 liters, with a cover that includes a plastic seal. In addition to this, the Fekabox series of products is only suitable for use with one single phase automatic pump, which can be either FEKA 600, FEKA VS 550, FEKA VX 550 or FEKA VS 750. Note that the pump must be ordered separately.
Sewage lifting unit - 1 - 32 m³/h, 200 l | FEKABOX 200
Automatic collection and lifting stations, used for
collecting...
collecting...
Sewage lifting unit - 1 - 32 m³/h, 200 l | FEKABOX 200
Automatic collection and lifting stations, used for
collecting and pumping civil and industrial waste water
in sewers.
Comprises a high density 200 litre polythene tank with
removable cover complete with a watertight and gastight
seal.
collecting and pumping civil and industrial waste water
in sewers.
Comprises a high density 200 litre polythene tank with
removable cover complete with a watertight and gastight
seal.
Sewage lifting unit - 1 - 48 m³/h, 280 l | FEKAFOS 280
This automatic collection and lifting station is typically used in sewers to pump and collect waste water from city and industrial waste.The product includes a high density polythene tank with an efficient capacity of 280 liters and it comes with a detachable gastight...
Sewage lifting unit - 1 - 48 m³/h, 280 l | FEKAFOS 280
This automatic collection and lifting station is typically used in sewers to pump and collect waste water from city and industrial waste.The product includes a high density polythene tank with an efficient capacity of 280 liters and it comes with a detachable gastight seal and waterproof cover.
This series of Fekafos products is appropriate to use only with the below mentioned not automatic triphase/single phase pump: DN 50(FEKA 2015-2030.2TNA, FEKA 1400 M-1800 T, FEKA VX/VS 550-750-1000-1200 M-NA/T GRINDER 1000-1200-1600 T, FEKA 600 M-NA/T, GRINDER 1400 M-1800 T) DN 65(FEKA-2515, FEKA 2500.4T, FEKA 2500-FEKA 2700.2T), pumps must be ordered separately. The product is complete with a cable holder which is required for attaching the pump cables and the float to the electric panal and 2 bulb floats fixed on a stainless steel support. For easy maintenance of pump the DN110 and DN50 suction manifolds, delivery manifolds 2, adapter for vent tube DN50, and DSD2 lifting device come as standard eqipment. An optional alarm float can ordered on request.
This series of Fekafos products is appropriate to use only with the below mentioned not automatic triphase/single phase pump: DN 50(FEKA 2015-2030.2TNA, FEKA 1400 M-1800 T, FEKA VX/VS 550-750-1000-1200 M-NA/T GRINDER 1000-1200-1600 T, FEKA 600 M-NA/T, GRINDER 1400 M-1800 T) DN 65(FEKA-2515, FEKA 2500.4T, FEKA 2500-FEKA 2700.2T), pumps must be ordered separately. The product is complete with a cable holder which is required for attaching the pump cables and the float to the electric panal and 2 bulb floats fixed on a stainless steel support. For easy maintenance of pump the DN110 and DN50 suction manifolds, delivery manifolds 2, adapter for vent tube DN50, and DSD2 lifting device come as standard eqipment. An optional alarm float can ordered on request.
Sewage lifting unit - max. 75 gpm | P2WW05
Pump and Polyethylene Basin Package Specially designed for the following uses: Homes, rural water districts, parks and dewatering and wastewater containing solids up to 2 inches
Wastewater pumping station - max. 105 gpm | RWW, 2WW05 series
Pump and Polyethylene Basin Package Specially...
Wastewater pumping station - max. 105 gpm | RWW, 2WW05 series
Pump and Polyethylene Basin Package Specially designed for the following uses: Homes, rural water districts, parks and dewatering and wastewater containing solids up to 2 inches
Wastewater pumping station - max. 55 gpm | RSDS
Built in overload with automatic reset.
REC4, 0.4HP, 3/4″ solids handling pump RSDS1
A2H11 vertical...
REC4, 0.4HP, 3/4″ solids handling pump RSDS1
A2H11 vertical...
Wastewater pumping station - max. 55 gpm | RSDS
Built in overload with automatic reset.
REC4, 0.4HP, 3/4″ solids handling pump RSDS1
A2H11 vertical level switch with 10 foot cord and piggy-back plug is UL and CSA listed.
RS3V, 1/3 HP, 3/8″ solids handling pump RSDS2
1 1/2″ schedule 40 PVC discharge pipe (internal).
Fully assembled at factory for simplified handling and easy installation RWC5P
Includes RWC5 1/2HP, 2″ solids handling pump.
REC4, 0.4HP, 3/4″ solids handling pump RSDS1
A2H11 vertical level switch with 10 foot cord and piggy-back plug is UL and CSA listed.
RS3V, 1/3 HP, 3/8″ solids handling pump RSDS2
1 1/2″ schedule 40 PVC discharge pipe (internal).
Fully assembled at factory for simplified handling and easy installation RWC5P
Includes RWC5 1/2HP, 2″ solids handling pump.
Wastewater pumping station - max. 50 gpm | RSDSST
Sink Drain System specifically designed for laundry tray, wet bar sink, air conditioning or dehumidifier...
Wastewater pumping station - max. 50 gpm | RSDSST
Sink Drain System specifically designed for laundry tray, wet bar sink, air conditioning or dehumidifier condensate, residential dishwashers and beautician sinks.
Features and Benefits
Fully assembled at the factory for simplified installation
Capable of running dry without damage to components
10 gallon structural foam basin
.33 HP, 115 V, 1 phase, 60 HZ, 3000 rpm motor
Features and Benefits
Fully assembled at the factory for simplified installation
Capable of running dry without damage to components
10 gallon structural foam basin
.33 HP, 115 V, 1 phase, 60 HZ, 3000 rpm motor