Visual alarms, Beacon lights, Stack lights

select brand


FHF Funke Huster Fernsig

Obstruction light LED / overhead - SkyLine Alpha

The Skyline Alpha series is based on a rubber housing with a transparent or red plastic cap. The six diode strips each with eight horizontally alligned LED´s exceed the minimum requirements of the ICAO of 10 cd explicit...

Obstruction light LED / overhead - SkyLine Alpha

The Skyline Alpha series is based on a rubber housing with a transparent or red plastic cap. The six diode strips each with eight horizontally alligned LED´s exceed the minimum requirements of the ICAO of 10 cd explicit...

Flashing beacon / LED / explosion-proof - dSLB20LED

Hazardous areas often require the use of optical signals for warning or information purposes. The EExII rotating beacon dSLD 21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the rotating beacon dSLD 21 is activated.The device is available...

Flashing beacon / LED / explosion-proof - dSLB20LED

Hazardous areas often require the use of optical signals for warning or information purposes. The EExII rotating beacon dSLD 21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the rotating beacon dSLD 21 is activated.The device is available in several versions with various levels of operating voltage and and various signallingcolours. The stable, glass-fibre reinforced polyester (GRP) housing is made to the IP66 degree of protection and may be used indoors or outdoors. The II 2 G EEx de IIC T6 protection class enables the unlimited use of the signalling device in all hazardous areas, zones 1 and 2. The flameproof enclosure and the "increased safety" type of protection of the terminal room guarantee hazardous area protection. The upper part of the flameproof enclosure, which contains the electronic and the mounted halogen lamp, consists of a transparent Makroloncap. An inner cap lends colour to the light. The housing consists completely of GRP. Thus the device is protected against corrosion, and fulfills the requirements of contact safety class II. An equipotentiel bonding is not required. All outer fastening parts are manufactured in non corrosive materials.

Flashing light - BLE 15

Weatherproof Strobe Light BLE 15
High power strobe light with 15 Joule flash energy for outdoor use

• Protection IP 66
• Flash energy 15 Joule
•...

Flashing light - BLE 15

Weatherproof Strobe Light BLE 15
High power strobe light with 15 Joule flash energy for outdoor use

• Protection IP 66
• Flash energy 15 Joule
•...

Flashing light - 5 / 15 J, IP54 | BLS

Robust Strobe Light with impact resistant plastic housing
Application:...

Flashing light - 5 / 15 J, IP54 | BLS

Robust Strobe Light with impact resistant plastic housing
Application: Indoors and outdoors (IP54)
Housing: Plastic (grau), lens made by Plexiglas
Flash energy: 5 Joule or 15 Joule
Different lens colours

LED beacon / for hazardous areas / signalling - IP 65 | BLK

It is often necessary to use optical signals for warning and indicating purposes in very noisy surroundings. The BLK LED emits clearly recognisable signals. The sturdy housing...

LED beacon / for hazardous areas / signalling - IP 65 | BLK

It is often necessary to use optical signals for warning and indicating purposes in very noisy surroundings. The BLK LED emits clearly recognisable signals. The sturdy housing conforms to protection degree IP 65 and is suitable for both indoor and outdoor use. The signalling light is available in four different cap colours.The modern electronics are mounted on a printed circuit board of glass fibre reinforced epoxy resin. The weather-proof coated aluminium die- kast housing is equipped with a ribbed cap of impact-resistant plexiglass. The signalling light is provided with a M20 cable gland for cable diameters of 8 to 12 mm. Three modes (continous, blinking and flash light) are switchable.
A.M.I.

Alarm annunciator - J3500

J3500

Format DIN 144x144.

Automat for centralising technical faults with 12 high luminosity leds, PC parameter settings and text display.

A "top of the...

Alarm annunciator - J3500

J3500

Format DIN 144x144.

Automat for centralising technical faults with 12 high luminosity leds, PC parameter settings and text display.

A "top of the range" product with all the functions of the J3000 with all the flexibility of PC programming.
Many additional functions.

Application: All industries including "high risk". This product is preferable in situations requiring sophisticated or different, channel by channel settings.

Simple, user-friendly PC software supplied. Bus RS422/485 Modbus/Jbus.

Selections by input channels
Output scheduler
Scheduling and processing of alarms and indicators
Text display with History and settings menu

Alarm display panel - J3000

J3000
Format DIN 144x144.

Automats of treatment of technical defaults to 12 leds high luminosity, settings by switchs.

Agreement Veritas.
Use: All industries including industry "at the risk".

Selections...

Alarm display panel - J3000

J3000
Format DIN 144x144.

Automats of treatment of technical defaults to 12 leds high luminosity, settings by switchs.

Agreement Veritas.
Use: All industries including industry "at the risk".

Selections by ways:
- 12 inputs "contacts" normaly open or normaly close.
- 12 leds 10x10mm.
- 12 outputs "open collector" or possible "contact".
- Fixed indicator or blinking.
- Memorizing of alarms.
- Acknowledge by integrated button and/or reported.
- Sequence of 1st defect to 5ms.
- Selection "alarms" or "simple indication" by way.
- Wire Control of continuity on each input.
- Possible Temporization of the inputs.
- Automatic Revival of alarms possible.
- Output "general alarm" .

Option :
- Inputs / Outputs Bus RS485.
- Version blind case (station of blinking) possible.

Alarm annunciator - J1905

J1900
Format DIN 96x96.

Treatment panel of alarms sequence to 8 leds high luminosity.

Principal use: TERTIARY SECTOR.

Selections...

Alarm annunciator - J1905

J1900
Format DIN 96x96.

Treatment panel of alarms sequence to 8 leds high luminosity.

Principal use: TERTIARY SECTOR.

Selections ways by ways :
- 8 entries "contacts" normaly open or normaly close.
- 8 outputs "open collector", possible outputs "contact".
- 8 leds 5x10mm.
- fixed indicator or blinking (with sequence of alarm).
- possible Blocking of the input by ways.
- Temporization of each input.
- Relay "general alarm" possible select.

Option :
- Buzzer.

For installations comprising several J1900 panels, defer to the ALARM' BOX.

Event recorder / alarm - PANEL PC

PANEL PC
Centralization of technical défault.

PANEL PC is a manager of technical alarm by integral BUS of the functionalities of operator assistance, of history with saving on card Compact Flash.

PANEL PC allows to manage 64 off-set modules of 12 alarms or the modules...

Event recorder / alarm - PANEL PC

PANEL PC
Centralization of technical défault.

PANEL PC is a manager of technical alarm by integral BUS of the functionalities of operator assistance, of history with saving on card Compact Flash.

PANEL PC allows to manage 64 off-set modules of 12 alarms or the modules...
PATLITE

LED stack light - ø 30 mm, 24 V | MP-C

Slim LED tower with silver-colored...

LED stack light - ø 30 mm, 24 V | MP-C

Slim LED tower with silver-colored body and a compact design at 30mm (1-1/4-inch) diameter, Body Length 220mm.

LED stack light / with loudspeaker - ø 70 mm | LS7

Patlite offers a "Smart and Smooth" Signal Tower to its lineup, the "LS7". By changing the surface of the body into a smoother form, the adhesion of water and...

LED stack light / with loudspeaker - ø 70 mm | LS7

Patlite offers a "Smart and Smooth" Signal Tower to its lineup, the "LS7". By changing the surface of the body into a smoother form, the adhesion of water and dust is reduced. The structure no longer exposes any screws, shafts or other metals to be adaptable for various environments. With the state-of-the-art inner lens design, the LED emits a sharper, more efficient light. The sound frequence of the optional buzzer can "cut through" the sound from operating machinery that would normally drown out other buzzer sounds. The LS7 comes in a 3 tier or 5 tier model with an assortment of options, including the popular M12 connector.

LED stack light / explosion-proof - Ø 40 mm, IP65 | AR-070

Explosion-safety : CE Ex II 3 GD; Ex nA II T4; Ex tD A22 IP65 T85℃
Standards : CE compliance in...

LED stack light / explosion-proof - Ø 40 mm, IP65 | AR-070

Explosion-safety : CE Ex II 3 GD; Ex nA II T4; Ex tD A22 IP65 T85℃
Standards : CE compliance in accordance to ATEX.
Zone classification : Suitable for Zone 2 and Zone 22
Light Source: Full and brilliant lumination, LED double reflection lighting system.
Cable : Factory sealed cable, Ф8mm, length 3 meter
Mounting: Wall mount or direct mount.
Protection : IP65 ( IP54 with buzzer )

LED stack light / explosion-proof - Ø 60 mm, IP65 | AR-078

Explosion-safety : CE Ex II 3 GD; Ex nA II T4; Ex tD A22 IP65 T85℃
Standards : CE compliance in...

LED stack light / explosion-proof - Ø 60 mm, IP65 | AR-078

Explosion-safety : CE Ex II 3 GD; Ex nA II T4; Ex tD A22 IP65 T85℃
Standards : CE compliance in accordance to ATEX.
Zone classification : Suitable for Zone 2 and Zone 22
Light Source: Full and brilliant lumination, LED double reflection lighting system.
Cable : Factory sealed cable, Ф8mm, length 1.5 meter
Mounting: Wall mount or direct mount.
Protection : IP65 ( IP54 with buzzer )

LED stack light / explosion-proof - Ø 152 mm, IP66 | EDLM

Standards: Compliance to ATEX and NEC standards.
Connection: Easy wiring for parallel connection...

LED stack light / explosion-proof - Ø 152 mm, IP66 | EDLM

Standards: Compliance to ATEX and NEC standards.
Connection: Easy wiring for parallel connection to another interlocking device through 2 lead-in ports.
Terminal Block: Easy connection to the signal tower by opening the bottom cover.
Body: Made of aluminum alloy.
Light Source: Long life, maintenance-free LED.
Mounting: Wall mount, flush mount and horizonal mount.
{{item.name}}