+7 (812) 645-08-06
AC/DC power supplies: open frame, enclosed
select brand
Emergency power supply DIN rail / battery-powered - 12 V, 7 Ah | MDB/12V7AH
MDB/12V 7AH battery pack is specifically designed for installation in DIN-rail systems, and connection to Comstec power...
Emergency power supply DIN rail / battery-powered - 12 V, 7 Ah | MDB/12V7AH
MDB/12V 7AH battery pack is specifically designed for installation in DIN-rail systems, and connection to Comstec power supply assembly and MODUSV UPS series. It provides higher autonomy up to 14 Ah. Its housing is made from plastic materials which features high thermoresistance, allowing compatible fitting to main module MODUSV. This assembly is powered by a hermetic lead-acid battery unit that obtains 12 V and 7 Ah nominal voltage and workload capacity.
Emergency power supply DIN rail / battery-powered - 12 V, 4 Ah | BAT9/12V4AH
The BAT9 is a battery pack for DIN-rail mounting develop by Comatec. It is composed of 9 modules suitable for DIN-rail mounting for thermoresistant plastic...
Emergency power supply DIN rail / battery-powered - 12 V, 4 Ah | BAT9/12V4AH
The BAT9 is a battery pack for DIN-rail mounting develop by Comatec. It is composed of 9 modules suitable for DIN-rail mounting for thermoresistant plastic material. This battery pack is the natural expansion of the USV2 products. The products of the USV2 range can be connected to other kinds of hermetic lead-acid batteries having a capacity not higher than 14Ah. It is suggested that homologated and certified batteries are utilized, and all batteries must be disposed of at the end of their life cycle.
This pack has an output voltage of 12V, and a 4Ah hermetic lead-acid battery.
This pack has an output voltage of 12V, and a 4Ah hermetic lead-acid battery.
Switch-mode power supply / switch-mode / module / for automation systems - PSF series
The PSF Power Supplies utilize updated exchanging technology systems. They are essentially used...
Switch-mode power supply / switch-mode / module / for automation systems - PSF series
The PSF Power Supplies utilize updated exchanging technology systems. They are essentially used within the Home Automation Sector, in the outfitting division and in all the requisitions for which diminished measurements and high unwavering quality over the span of time are asked.
The PSF series is also described by a high proficiency, and decreased no-heap ingestion.
The PSF series is also described by a high proficiency, and decreased no-heap ingestion.
AC/DC power supply / backed-up voltage rectifier - 24 V, 72 W | MDLB 0300 24
The power supplies of the Comatec MODUSV range has a battery in parallel to the output and have been developed for the home automation...
AC/DC power supply / backed-up voltage rectifier - 24 V, 72 W | MDLB 0300 24
The power supplies of the Comatec MODUSV range has a battery in parallel to the output and have been developed for the home automation...
AC/DC power supply / backed-up voltage rectifier - 12 V, 60 W | MDLB 0500 12
Comatec's MDL 0500 12 has been enhanced for the Home Automation Sector, specifically for the security...
AC/DC power supply / backed-up voltage rectifier - 12 V, 60 W | MDLB 0500 12
Comatec's MDL 0500 12 has been enhanced for the Home Automation Sector, specifically for the security systems, access control and video surveillance. It is a power supply that involves quality functions and battery load. It has an input voltage of 230 Vac while its output voltage is 12 vdc. The nominal current of the unit is 5A while the nominal power is 60 W within the battery which is 7Ah.
AC/DC power supply / switch-mode / open-frame / for medical applications - 3.3 - 12 V, 300 W | MPM-A30H
The MPM A30H series from Hitek Power is a medical grade open frame with an AC/DC switch and...
AC/DC power supply / switch-mode / open-frame / for medical applications - 3.3 - 12 V, 300 W | MPM-A30H
The MPM A30H series from Hitek Power is a medical grade open frame with an AC/DC switch and a current PFC. It can supply a 300 W output power, and includes a highly-efficient 1U chassis with ATX output. The MPM A30H series converter has a no-noise design, and is manufactured with a fan-less power supply for an ultra-quiet, medical and industrial system.
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 36 V, 250 W | RL0603
The RL0603 Series features a switching power supply designed for various system...
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 36 V, 250 W | RL0603
The RL0603 Series features a switching power supply designed for various system applications. This unit is built with a U-chassis drive of 250 W max. power and an in-house fan with mechanical options. It provides a 12 VDC to 36 VDC dual output range and is manufactured with safety approvals for efficient operation.
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 48 V, 300 W | RL0601
Smallest 320W with a 1U height has 8.9 watts/cuin power density. The leakage rate is really low and...
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 48 V, 300 W | RL0601
Smallest 320W with a 1U height has 8.9 watts/cuin power density. The leakage rate is really low and the current is 500uA@240Vac/300uA@120Vac. Power factor correction limit is EN61000-3-2classA. During peak power hours the duty duration is 700W within 500uS Duty duration. It is approved for ULCULTUVCB and CE. Output voltage varies from 12~48Vdc. Unit is available with 4 mechanical options.
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 48 V, 320 W | PRL0602
This product features a power of 320W with 1U height. Its power density is at...
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 48 V, 320 W | PRL0602
This product features a power of 320W with 1U height. Its power density is at 8.9watts/cuin. and its power factor is corrected to EN61000-3-2class D. Its power peaks up to 700W within 500 Us duty duration. This product complies with ULCULTUV CB and CE standards. Its output voltages ranges from 12VDC to 48 VDC.
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 48 V, 400 W | RL0402
Product is designed for maximum power range 700 W in duty cycles 500uS. It has optional N+1 Forced...
AC/DC power supply / open-frame / PFC / with power factor correction (PFC) input - 12 - 48 V, 400 W | RL0402
Product is designed for maximum power range 700 W in duty cycles 500uS. It has optional N+1 Forced Active Current sharing. It is 1U high. Its power density is 6.25 Watts/cu-in.
Power factor follows guidelines EN61000-3-2 class D. It confirms to ITE/medical standards. It is enclosed in U-chassis with cooling fan. It monitors current and regulates voltage remotely.
Power factor follows guidelines EN61000-3-2 class D. It confirms to ITE/medical standards. It is enclosed in U-chassis with cooling fan. It monitors current and regulates voltage remotely.
AC/DC power supply / mains adapter / stabilized - 29 VDC, 2.5 A | TP2 series
The TP2 Series is a power supply unit designed with an SMPS transformer....
AC/DC power supply / mains adapter / stabilized - 29 VDC, 2.5 A | TP2 series
The TP2 Series is a power supply unit designed with an SMPS transformer. It operates with a 29 V DC or 2.5 A maximum output, and a range of input voltage from 100 to 240 V AC. This unit is also equipped with a chamber for external battery, if necessary.
AC/DC power supply / mains adapter / stabilized - 20 VDC, 3 A | TP3 series
Type: EI, Toroidal
Input voltage:...
Input voltage:...
AC/DC power supply / mains adapter / stabilized - 20 VDC, 3 A | TP3 series
Type: EI, Toroidal
Input voltage: 100, 120, or 230V AC
Maximum output: 20V DC, 3.0A
Chamber for external battery
CE compliant
Input voltage: 100, 120, or 230V AC
Maximum output: 20V DC, 3.0A
Chamber for external battery
CE compliant
AC/DC power supply / mains adapter / stabilized - 29 VDC, 5 A | TP4 series
The TiMotion Power Supplies continuously offer consistent current, refining pulse from the main...
AC/DC power supply / mains adapter / stabilized - 29 VDC, 5 A | TP4 series
The TiMotion Power Supplies continuously offer consistent current, refining pulse from the main power with top-most effectiveness and less electromagnetic obstruction.
The TiMotion Power Supply adheres to IEC60601 - 1 compliance with EI, Torodial and SMPS. The Power Supply can take a optimal output of 29V DC and 5.0A with a protection class up to IP66.
The TiMotion Power Supply adheres to IEC60601 - 1 compliance with EI, Torodial and SMPS. The Power Supply can take a optimal output of 29V DC and 5.0A with a protection class up to IP66.
AC/DC power supply / mains adapter / stabilized - 29 VDC, 2 A | TP5 series
The TP5 series is a switched-mode power supply that delivers an input voltage of alternating...
AC/DC power supply / mains adapter / stabilized - 29 VDC, 2 A | TP5 series
The TP5 series is a switched-mode power supply that delivers an input voltage of alternating current ranging from 100 to 240 Volts. Its maximum voltage of direct current on the other hand is 29 Volts and 2.0A. Available in black or grey, this power supply has a plug support adaptable to Europe, USA, Australia, United Kingdom and Japan standards.
AC/DC power supply / mains adapter / stabilized - 31.5 VDC, 5 A | TP6 series
The Tomotion TP6 Series incorporates the SMPS transformer type power...
AC/DC power supply / mains adapter / stabilized - 31.5 VDC, 5 A | TP6 series
The Tomotion TP6 Series incorporates the SMPS transformer type power supplies. It is equipped with an input voltage ranging from 100 to 240 AC. A maximum output of 31.5 V DC, 5.0 A is also integrated. The range are made with UP to IP66 type of protection class.