+7 (812) 645-08-06
Power chokes and inductors
select brand
Power inductor
Coil core with grain structure oriented special alloy, additional pre- and after-treatments.
Due to high quality materials and continuous quality management (ISO 9001) in production, our power inductors provide outstanding durability without any malfunctions.
Excellent...
Due to high quality materials and continuous quality management (ISO 9001) in production, our power inductors provide outstanding durability without any malfunctions.
Excellent...
Power inductor
Coil core with grain structure oriented special alloy, additional pre- and after-treatments.
Due to high quality materials and continuous quality management (ISO 9001) in production, our power inductors provide outstanding durability without any malfunctions.
Excellent degree of efficiency for optimized losses in high quality diplexers and inductive components.
Best results when used with 18dB or 24dB diplexers, 2 coils parallely connected.
Low internal resistance, even at high inductivities, influence on speakers degree of efficiency is neglectable.
Extraordinary low distortion factor for the complete power range (neglectable in practice).
Distortion factor (K3) typically < 0.1%.
Nominal value 0.01% - 0.05%; comparable to the distortion factor of a high end power amplifier (within critical audio range from 100Hz up to 5kHz).
Due to a high saturation, coil load may be very high without any negative influence on sound pattern.
Due to construction and mounting heat dissipation is excellent.
Convincing price/ performance ratio.
Due to high quality materials and continuous quality management (ISO 9001) in production, our power inductors provide outstanding durability without any malfunctions.
Excellent degree of efficiency for optimized losses in high quality diplexers and inductive components.
Best results when used with 18dB or 24dB diplexers, 2 coils parallely connected.
Low internal resistance, even at high inductivities, influence on speakers degree of efficiency is neglectable.
Extraordinary low distortion factor for the complete power range (neglectable in practice).
Distortion factor (K3) typically < 0.1%.
Nominal value 0.01% - 0.05%; comparable to the distortion factor of a high end power amplifier (within critical audio range from 100Hz up to 5kHz).
Due to a high saturation, coil load may be very high without any negative influence on sound pattern.
Due to construction and mounting heat dissipation is excellent.
Convincing price/ performance ratio.
Network choke - max. 20 kHz
Green core Inductive Systems is developed for reactors in grid feeding and back dining converters....
Network choke - max. 20 kHz
Green core Inductive Systems is developed for reactors in grid feeding and back dining converters.
It is useful for single-phase as well as three-phaseapplications and can also be used for many several
reactor and transformer-topologies and applications like:
Power electronics, intelligent drive technology, power quality
It is useful for single-phase as well as three-phaseapplications and can also be used for many several
reactor and transformer-topologies and applications like:
Power electronics, intelligent drive technology, power quality
Engine choke - 2.2 - 45 kW | CEM series
The CEM is a series of motor output chokes manufactured by Circutor. The CEM series is composed of...
Engine choke - 2.2 - 45 kW | CEM series
The CEM is a series of motor output chokes manufactured by Circutor. The CEM series is composed of different types, such as CEM-21, CEM-28.5, CEM-50 and CEM-58.
The chokes decrease the interference produced in the control systems and data lines due to the adjustments transmitted in the cable connected to the motor. This occurs when excess currents in common mode is reduced.
The chokes decrease the interference produced in the control systems and data lines due to the adjustments transmitted in the cable connected to the motor. This occurs when excess currents in common mode is reduced.
Power inductor / single-phase
Inductances
Single-phase Three-phase Air cored
Applications
Harmonic reject filter, net filter for commuted chargers, current peak limitation filter, harmonic absorption...
Single-phase Three-phase Air cored
Applications
Harmonic reject filter, net filter for commuted chargers, current peak limitation filter, harmonic absorption...
Power inductor / single-phase
Inductances
Single-phase Three-phase Air cored
Applications
Harmonic reject filter, net filter for commuted chargers, current peak limitation filter, harmonic absorption filter, DC ondulation filter, filters for problem of resound in low voltage nets correction, filters for reducing micronuts, ...
Special inductances
Inductances designed as charge
Field of application
All those applications in which an inductances is needed for a special labour (banks of essay for inductive loads, ...)
Inductances for DC filtering
Field of application
All those applications in which it is needed to reduce the ripple of a DC voltage (Power Rectifiers filtering basically).
Single-phase Three-phase Air cored
Applications
Harmonic reject filter, net filter for commuted chargers, current peak limitation filter, harmonic absorption filter, DC ondulation filter, filters for problem of resound in low voltage nets correction, filters for reducing micronuts, ...
Special inductances
Inductances designed as charge
Field of application
All those applications in which an inductances is needed for a special labour (banks of essay for inductive loads, ...)
Inductances for DC filtering
Field of application
All those applications in which it is needed to reduce the ripple of a DC voltage (Power Rectifiers filtering basically).
Power inductor / three-phase
Single-phase and three-phase inductances are used for harmonic reject filter, net filter of commuted chargers, current peak limitation...
Power inductor / three-phase
Single-phase and three-phase inductances are used for harmonic reject filter, net filter of commuted chargers, current peak limitation filter, harmonic absorption filter, DC modulation filter, filters for problem of resound in low voltage nets correction, filters for reducing micronuts.
The product can be used in all applications that needs inductances for special labor and for DC filtering. Its windings are made of copper, aluminum, iron or air cored. Furthermore, it has frequency that ranges from 50-60 Hz.
The product can be used in all applications that needs inductances for special labor and for DC filtering. Its windings are made of copper, aluminum, iron or air cored. Furthermore, it has frequency that ranges from 50-60 Hz.
Power inductor / air
The EREMU single-phase, three-phase, or air cored inductors are used for harmonic reject filters, net filters for commuted chargers, current peak limitation...
Power inductor / air
The EREMU single-phase, three-phase, or air cored inductors are used for harmonic reject filters, net filters for commuted chargers, current peak limitation filters, harmonic absorption filters, DC ondulation filters, filters for resound problems in low voltage nets correction, filters for reducing micronuts, etc. They can basically be used in any application in which inductance is need for special work (bank of essay for inductive loads), or can be used for situations where reduction of the DC voltage ripple is needed (power rectifiers filtering basically). Special inductance can be requested.