+7 (812) 645-08-06
Incremental rotary encoders
select brand
Incremental rotary encoder / compact - RE50
The New Incremental Encoder RE50 from Elap Industrial Automation comes in a compact...
Incremental rotary encoder / compact - RE50
The New Incremental Encoder RE50 from Elap Industrial Automation comes in a compact...
Incremental rotary encoder / compact - REC series
The REC series is a line of compact-sized encoders manufactured by Elap. It is suitable for use in industrial applications requiring short body dimensions.
The...
The...
Incremental rotary encoder / compact - REC series
The REC series is a line of compact-sized encoders manufactured by Elap. It is suitable for use in industrial applications requiring short body dimensions.
The device can be used with a maximum body length of 38 mm. It features 2 to 12500 pulses per revolution, and output signals. The line-driver or push-pull type allows coupling of the encoders in any kind of electronic control.
The series comes in various mechanical versions, such as the REC520, REC540, REC620, REC440, and REC450. These versions can satisfy different user/application requirements.
The device can be used with a maximum body length of 38 mm. It features 2 to 12500 pulses per revolution, and output signals. The line-driver or push-pull type allows coupling of the encoders in any kind of electronic control.
The series comes in various mechanical versions, such as the REC520, REC540, REC620, REC440, and REC450. These versions can satisfy different user/application requirements.
Incremental rotary encoder / magnetic / compact - 5 Vdc, IP64 | RM22
The RM22 series of encoders is known for the advanced operating mode of the devices, which is based on the magnetic principle. One single diametrally-polarized magnet can activate the Hall sensors that are integrated into the...
Incremental rotary encoder / magnetic / compact - 5 Vdc, IP64 | RM22
The RM22 series of encoders is known for the advanced operating mode of the devices, which is based on the magnetic principle. One single diametrally-polarized magnet can activate the Hall sensors that are integrated into the ASIC. In addition to this, the sensor can run contactless, which guarantees a higher reading accuracy and an endless mechanical life for the product. Next, the small size and compact design allows employing the devices into various applications.
The case is made of aluminum and allows a high protection degree, with the IP64-rated items being fit for dusty, greasy and harsh environments in general. The encoders in the RM22 series can also be supplied in an absolute or incremental version, benefiting from various output formats. Finally, the body measures 22mm, while the shaft is 6mm, with the 20mA current consumption being specific for these products.
The case is made of aluminum and allows a high protection degree, with the IP64-rated items being fit for dusty, greasy and harsh environments in general. The encoders in the RM22 series can also be supplied in an absolute or incremental version, benefiting from various output formats. Finally, the body measures 22mm, while the shaft is 6mm, with the 20mA current consumption being specific for these products.
Incremental rotary encoder / with square flange - 2 - 36 000 ppr, 63.5 x 63.5 mm | E620
The E620 is a square flanged type of incremental encoders. The centering mask of the encoder has a 31.75mm diameter. These encoders consist of an ABS plastic or metal case housing. The...
Incremental rotary encoder / with square flange - 2 - 36 000 ppr, 63.5 x 63.5 mm | E620
The E620 is a square flanged type of incremental encoders. The centering mask of the encoder has a 31.75mm diameter. These encoders consist of an ABS plastic or metal case housing. The connection, position, supply voltage, output signal and shaft diameters can be chosen on the options. The pulse per revolution ranges from 2 to 12500.
The device uses a 8/24 or 5Vdc voltage and consumes 30/80mA power. The device uses axial or radial connector and cable outlet. The output signals are NPN open collector, push-pull, 5Vdc and 8/24Vdc line driver. The device consist of a IP64 protection to avoid short circuits and reversal of polarity. The maximum counting frequency of the device is 100 KHz – 200 KHz for ppr > 1000.
The device uses a 8/24 or 5Vdc voltage and consumes 30/80mA power. The device uses axial or radial connector and cable outlet. The output signals are NPN open collector, push-pull, 5Vdc and 8/24Vdc line driver. The device consist of a IP64 protection to avoid short circuits and reversal of polarity. The maximum counting frequency of the device is 100 KHz – 200 KHz for ppr > 1000.
Incremental rotary encoder - ø 58 mm, 2 - 36 000 ppr | E520
The range of incremental encoders with 58 mm round flange includes different mechanical types: the series E520, with centering mask diameter 50 mm, compatible with the international standard SIZE23, E540, with centering mask diameter 36 mm and E510 with centering mask diameter 31.75.
All the types are housed in a plastic or metal case (metal-cased series are named RE). The encoder series RE530,...
All the types are housed in a plastic or metal case (metal-cased series are named RE). The encoder series RE530,...
Incremental rotary encoder - ø 58 mm, 2 - 36 000 ppr | E520
The range of incremental encoders with 58 mm round flange includes different mechanical types: the series E520, with centering mask diameter 50 mm, compatible with the international standard SIZE23, E540, with centering mask diameter 36 mm and E510 with centering mask diameter 31.75.
All the types are housed in a plastic or metal case (metal-cased series are named RE). The encoder series RE530, with international standard flange type RE0444 avails exclusively on the alumium housing.
The connection type and position can be chosen among different options, as well as the supply voltage, the output signal formats and the shaft diameters.
The pulses per revolution number ranges from 2 to 10000 – or up to 36000 in the series named REV, with aluminium case and glass disc.
The zero reference pulse option is available for all the series (type E521/RE521/REV521 etc.).
Technical specifications
* Voltage supply 10/24 or 5 Vdc – Power consumption 30/80 mA
* Max counting frequency 100 KHz – 200 KHz for ppr > 1000
* Axial or radial connector outlet, equipped with the flying part – Axial or radial cable outlet, 3 m long cable (cable length 1 m with line driver output)
* Output signals: NPN open collector, push-pull, 5 Vdc line driver (supply 5 or 10/24 Vdc), 10/24 Vdc line driver (supply 10/24 Vdc)
* Protection against short circuit and polarity reversal
* ABS plastic case (series E) or aluminium case (series RE)
* IP64 protection degree (optional IP65 with O-ring mounted on the shaft)
All the types are housed in a plastic or metal case (metal-cased series are named RE). The encoder series RE530, with international standard flange type RE0444 avails exclusively on the alumium housing.
The connection type and position can be chosen among different options, as well as the supply voltage, the output signal formats and the shaft diameters.
The pulses per revolution number ranges from 2 to 10000 – or up to 36000 in the series named REV, with aluminium case and glass disc.
The zero reference pulse option is available for all the series (type E521/RE521/REV521 etc.).
Technical specifications
* Voltage supply 10/24 or 5 Vdc – Power consumption 30/80 mA
* Max counting frequency 100 KHz – 200 KHz for ppr > 1000
* Axial or radial connector outlet, equipped with the flying part – Axial or radial cable outlet, 3 m long cable (cable length 1 m with line driver output)
* Output signals: NPN open collector, push-pull, 5 Vdc line driver (supply 5 or 10/24 Vdc), 10/24 Vdc line driver (supply 10/24 Vdc)
* Protection against short circuit and polarity reversal
* ABS plastic case (series E) or aluminium case (series RE)
* IP64 protection degree (optional IP65 with O-ring mounted on the shaft)
Incremental rotary encoder / hollow-shaft / for motor feedback - 56QJ
The Square Flange patented encoder or the incremental rotary encoder with square...
Incremental rotary encoder / hollow-shaft / for motor feedback - 56QJ
The Square Flange patented encoder or the incremental rotary encoder with square flange 80QJ is generally available at an extremely low-cost price without having the risk of compromising the quality of the result it makes. It fits in an application in which the price plays an instrumental role for the user.
Incremental rotary encoder / magnetic / compact - M22
The ultra-compact magnetic encoder is equipped with high...
Incremental rotary encoder / magnetic / compact - M22
The ultra-compact magnetic encoder is equipped with high IP protection class compliance and excellent resilience to chemicals, lubricants, fluids etc. It is useful in medical, marine, metal-forming and printing applications.
Incremental rotary encoder / magnetic / compact - M22NC
Compact magnetic encoders with no contact established between...
Incremental rotary encoder / magnetic / compact - M22NC
Compact magnetic encoders with no contact established between the spinning shaft and transducer body, with extremely safe operation and oil and liquid resistant. It is ideal for applications which require fast speeds around 30000 RPM.
Incremental rotary encoder / magnetic / compact - M36
The Miniature Magnetic Encoder is built with high protection...
Incremental rotary encoder / magnetic / compact - M36
The Miniature Magnetic Encoder is built with high protection rating and is impervious against oils, and fluids. This product is ideally suitable for marine, therapeutic, printing, and metal applications.
Incremental rotary encoder / magnetic / compact - M36NC
The M36NC is a miniature magnetic encoder that has no contact between the shaft...
Incremental rotary encoder / magnetic / compact - M36NC
The M36NC is a miniature magnetic encoder that has no contact between the shaft and the body of the transducer. It features a high degree of security and is immune to liquids, oils and many more.
The encoder is ideal for the applications in which the speed can go approximately up to 30000 rpm.
The encoder is ideal for the applications in which the speed can go approximately up to 30000 rpm.
Incremental rotary encoder / optical / blind-shaft - TSWP58
Particularly compact incremental encoder with...
Incremental rotary encoder / optical / blind-shaft - TSWP58
Particularly compact incremental encoder with locking collet and integrated coupling for mounting clearance compensation. Typical application is a motor control systems.
Incremental rotary encoder / optical - ø 38 mm, max. 3 600 ppr | TK15 series
The TK15 series by Italsensor Srl is an incremental rotary encoder. The...
Incremental rotary encoder / optical - ø 38 mm, max. 3 600 ppr | TK15 series
The TK15 series by Italsensor Srl is an incremental rotary encoder. The unit comes with a compact design of having 38 mm for its body diameter and 6 mm for its diameter shaft. Also, the equipment has a resolution of 3600 PPR at maximum and an interface of LD, LD2, PP2, NPN, and PNP.
Incremental rotary encoder / optical / miniature - ø 44 mm, max. 3 600 ppr | TK20 series
The TK20 series by Italsensor Srl is a Miniature optical incremental rotary...
Incremental rotary encoder / optical / miniature - ø 44 mm, max. 3 600 ppr | TK20 series
The TK20 series by Italsensor Srl is a Miniature optical incremental rotary encoder. The unit comes with a compact design of having a 44mm for its body diameter and 6mm for its diameter shaft. Also, the equipment has a resolution of 3600 at maximum and an interface of LD, LD2, PP2, NPN and PNP.
Incremental rotary encoder / optical - ø 44 mm, max. 1 440 ppr | TK25 series
Italsensor's TK25 is an economical encoder device used for general-purpose industrial applications....
Incremental rotary encoder / optical - ø 44 mm, max. 1 440 ppr | TK25 series
Italsensor's TK25 is an economical encoder device used for general-purpose industrial applications. This encoder features a 44-mm body diameter, and a 6-mm diameter shaft. It also showcases compatibility with a range of interface configurations, such as LD, LD2, NPN, PNP, and PP2. Its total resolution rate approximates at 1,440 PPR (pulses per revolution).
Incremental rotary encoder / optical - ø 40 mm, max. 1 000 ppr | TS40 series
The TS40 series by Italsensor Srl is anOptical incremental rotary encoder....
Incremental rotary encoder / optical - ø 40 mm, max. 1 000 ppr | TS40 series
The TS40 series by Italsensor Srl is anOptical incremental rotary encoder. The unit comes with a compact design of having 40 mm for its body diameter and 6 mm for its diameter shaft. Also, the equipment has a resolution of 1000 at maximum and an interface of LD, LD2, PP2, NPN and PNP.