+7 (812) 645-08-06
Laboratory plate heaters, dry block heaters ...
select brand
Microscope hot-stage system - -90 ... 375 °C | HS82
The HS82 hot-stage system comes with HS 1 control unit and HS82 microscope hot-stage....
Microscope hot-stage system - -90 ... 375 °C | HS82
The HS82 hot-stage system comes with HS 1 control unit and HS82 microscope hot-stage. The system is designed to control the temperature of slide samples in small spaces, by way of a cooling fan on the measurement cell. A standard xy table on the touch-screen 7'' VGA color display focuses on specific sample areas.
Microscope hot-stage system - max. 375 °C | HS84 DSC
The HS84 DSC manufactured by Mettler Toledo is a hot-stage system that comes with a HS 1 control unit and a HS84 microscope hot-stage. The hot-stage system...
Microscope hot-stage system - max. 375 °C | HS84 DSC
The HS84 DSC manufactured by Mettler Toledo is a hot-stage system that comes with a HS 1 control unit and a HS84 microscope hot-stage. The hot-stage system is designed to observe and control the temperature of slide samples in either aluminum, glass or sapphire crucibles, and is also capable of simultaneously measuring the DSC heat flow. As a result of this, the HS84 can provide qualitative and quantitative information on both physical and chemical changes in the sample, so that the system no longer needs to be observed under a microscope.
Its display is a 7-inch touch-sensitive VGA colored screen.
Its display is a 7-inch touch-sensitive VGA colored screen.
Heating mantle - max. +450 °C, 50 - 1 000 ml | CMU series
The CMU Electromantles are encased in metal, and are utilized to heat liquids in round bottom flasks. They are also ideal whenever there are busy laboratories with a lot of users, since...
Heating mantle - max. +450 °C, 50 - 1 000 ml | CMU series
The CMU Electromantles are encased in metal, and are utilized to heat liquids in round bottom flasks. They are also ideal whenever there are busy laboratories with a lot of users, since...
Heating mantle with magnetic stirrers - max. +450 °C, 2 000 rpm | CMUA series
CMUA Electromantles is built into the base of the heater which facilitate powerful stirring over a wide range of solution volumes and viscosities using a magnetic stir bar. Stirring operation can be...
Heating mantle with magnetic stirrers - max. +450 °C, 2 000 rpm | CMUA series
CMUA Electromantles is built into the base of the heater which facilitate powerful stirring over a wide range of solution volumes and viscosities using a magnetic stir bar. Stirring operation can be...
Heating mantle - max. +450 °C, 250 - 1 000 ml | CMUT1000 series
The CMUT Electromantles is manufactured by Electrothermal. The product has compact and durable design and it has enclosed metal case on it for external protection. They are commonly utilized for busy...
Heating mantle - max. +450 °C, 250 - 1 000 ml | CMUT1000 series
The CMUT Electromantles is manufactured by Electrothermal. The product has compact and durable design and it has enclosed metal case on it for external protection. They are commonly utilized for busy...
Heating mantle - max. +450 °C, 10 - 22 l | CMUV series
The CMUV Electromantles is manufactured by Electrothermal. The product has compact and durable design and it has enclosed metal case on it for external protection. They are commonly utilized for busy...
Heating mantle - max. +450 °C, 10 - 22 l | CMUV series
The CMUV Electromantles is manufactured by Electrothermal. The product has compact and durable design and it has enclosed metal case on it for external protection. They are commonly utilized for busy...
Heating mantle with magnetic stirrers - max. +450 °C, 100 - 2 000 rpm | Digi-Mantle series
The Digi-Mantles Series, manufactured by Electrothermal®, is a circular bottom flask of 250ml, 500ml or 1000ml capacity to be utilized with an element temperature of 450°C in a precise electronic control that gives an accurate...
Heating mantle with magnetic stirrers - max. +450 °C, 100 - 2 000 rpm | Digi-Mantle series
The Digi-Mantles Series, manufactured by Electrothermal®, is a circular bottom flask of 250ml, 500ml or 1000ml capacity to be utilized with an element temperature of 450°C in a precise electronic control that gives an accurate...
Block heater - +5 °C ... +120 °C | Dry Block Heater 1
The Dry Block Heater 1 by Ika is a Dry block heater which is designed for one aluminum block that gives a precise temperature control of small...
Block heater - +5 °C ... +120 °C | Dry Block Heater 1
The Dry Block Heater 1 by Ika is a Dry block heater which is designed for one aluminum block that gives a precise temperature control of small vessels. For this specific model, it comes with a PT-1000 temperature sensor which enables the user to control the temperature in an application. It can be compatibly used with CR tubes, PCR strips, Greiner tubes, microplates and cuvettes. This is the ideal tool for determination of a specific boiling and melting point. Also, it can be used to measure enzyme reactions, incubation and activation of cultures.
Block heater - +5 °C ... +120 °C | Dry Block Heater 2
The Dry Block Heater 2 is ideally designed to provide an excellent quality performance and functionality for very specific purposes. It is a heater offers a very...
Block heater - +5 °C ... +120 °C | Dry Block Heater 2
The Dry Block Heater 2 is ideally designed to provide an excellent quality performance and functionality for very specific purposes. It is a heater offers a very accurate temperature control in several small vessels. The PT-1000 temperature sensor integrated within the sensor enables the temperature control to be directed unto the sample vessels. It is also mainly used with several PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. It also has the ability to melt and boil point determination, enzyme reactions, incubation and activation of cultures, immuno-assays, DNA denaturation, culture media tests and more.
Block heater - +5 °C ... +120 °C | Dry Block Heater 3
The Dry Block Heater 3 by Ika is a Dry block heater which is designed for three aluminum blocks. This tool offers a precise temperature control in small vessels....
Block heater - +5 °C ... +120 °C | Dry Block Heater 3
The Dry Block Heater 3 by Ika is a Dry block heater which is designed for three aluminum blocks. This tool offers a precise temperature control in small vessels. The unit comes with a PT-1000 temperature sensor which enables the user to control the temperature directly in a sample vessel. It can be compatibly used with CR tubes, PCR strips, Greiner tubes, microplates and cuvettes. This is the ideal tool for determination of a specific boiling, melting point, enzyme reactions, incubation, activation of cultures, immunoassays, DNA denaturation, culture media test, coagulation test, blood urea nitrogen determination and in-situ hybridizations.
Block heater - +5 °C ... +120 °C | Dry Block Heater 4
The dry block heater 4 is a digital block heater, that produces accurate temperature control in small containers. This device is integrated with a PT-1000 temperature...
Block heater - +5 °C ... +120 °C | Dry Block Heater 4
The dry block heater 4 is a digital block heater, that produces accurate temperature control in small containers. This device is integrated with a PT-1000 temperature...
Laboratory hot plate / digital - +50 °C ... +500 °C | C-MAG HP 4 IKATHERM®
The C-MAG HS 4, manufactured by IKA, is a magnetic stirrer equipped with a ceramic...
Laboratory hot plate / digital - +50 °C ... +500 °C | C-MAG HP 4 IKATHERM®
The C-MAG HS 4, manufactured by IKA, is a magnetic stirrer equipped with a ceramic glass heating plate. It has a speed range of 1,500 rpm, weight of 3 kg, dimensions of 150 x 105 x 260 mm, and stirring quantity of 5 L. This is used in applications such as medical diagnostics, sample preparation, and product testing.