+7 (812) 645-08-06
Bending beam load cells, shear beam load cells
select brand
Aluminum single point load cell - 50 - 500 kg, IP65 | L6E3 series
The L6E3 Model, manufactured by Celmi, is an aluminum single point load cell. The off center...
Aluminum single point load cell - 50 - 500 kg, IP65 | L6E3 series
The L6E3 Model, manufactured by Celmi, is an aluminum single point load cell. The off center load cell has 50 to 500 kg load capacity. It has maximum platform dimension of 450 x 450 mm. In addition, this device has an IP 65 protection rating. Moreover, the unit can be used for applications involving small-weighing platform, pricing scale, and bench scale.
Single-point load cell / stainless steel - max. 60 kg, IP68 | BM6A series
The BM6A Series is manufactured by Celmi, and is an off center load cell designed to measure...
Single-point load cell / stainless steel - max. 60 kg, IP68 | BM6A series
The BM6A Series is manufactured by Celmi, and is an off center load cell designed to measure both tensile and compressive loads. It has nominal loads of 6, 12, 30, 60 Kg, protection class of IP 68 and maximum platform size of 350 x 350 mm. This load cell is used in a wide range of applications involving packaging machines, platform scales and iron and steel plants.
Single-point load cell / stainless steel - 7 - 200 kg, IP67 | B6N series
The B6N series is a stainless steel single point load cell manufactured by Celmi. This load cell is used in...
Single-point load cell / stainless steel - 7 - 200 kg, IP67 | B6N series
The B6N series is a stainless steel single point load cell manufactured by Celmi. This load cell is used in small capacity weighing systems. It is made with 17-4PH stainless steel and its interior is potted by adhesive. Its construction makes it resistant to oil, water and corrosive gases which makes it applicable to any type of settings.
This high precision device has a low profile and can be easily installed.
This high precision device has a low profile and can be easily installed.
Single-point load cell / aluminium / thin - 0.3 - 3 kg, IP65 | L6B series
The L6B series is a range of off center load cells that can be utilized in small capacity...
Single-point load cell / aluminium / thin - 0.3 - 3 kg, IP65 | L6B series
The L6B series is a range of off center load cells that can be utilized in small capacity weighing systems.
The degree of protection of the products is IP 65 and they are made up of aluminum alloy. The load cells are applicable for counting scales, balances and pricing scales. Their platform size can go approximately up to 200x200 mm.
The degree of protection of the products is IP 65 and they are made up of aluminum alloy. The load cells are applicable for counting scales, balances and pricing scales. Their platform size can go approximately up to 200x200 mm.
Aluminum single point load cell - max. 3 kg, IP65 | L6J1 series
The L6J1 Model, manufactured by Celmi, is an aluminum single point load cell. The off center...
Aluminum single point load cell - max. 3 kg, IP65 | L6J1 series
The L6J1 Model, manufactured by Celmi, is an aluminum single point load cell. The off center load cell has a nominal load capacity range of 0.3, 0.4, 0.5, 0.6, 1, and 3 kg. It has maximum platform dimension of 200 x 200 mm. The unit has an IP 65 protection rating. It can be used for applications involving small-capacity weighing and hopper weighing.
Bending beam load cell / miniature / medical / beam - 5 - 250 lb | MB series
Proprietary Interface temperature compensated strain gages
Performance to 0.03%
...
Performance to 0.03%
...
Bending beam load cell / miniature / medical / beam - 5 - 250 lb | MB series
Proprietary Interface temperature compensated strain gages
Performance to 0.03%
...
Performance to 0.03%
...
Bending beam load cell / calibration / with overload protection - 5 - 100 N | MBP
Same as MB mini beam with internal overload protection.
Proprietary Interface temperature compensated strain gages
10x overload protection
Low height - 1in max
0.0008%F...
Proprietary Interface temperature compensated strain gages
10x overload protection
Low height - 1in max
0.0008%F...
Bending beam load cell / calibration / with overload protection - 5 - 100 N | MBP
Same as MB mini beam with internal overload protection.
Proprietary Interface temperature compensated strain gages
10x overload protection
Low height - 1in max
0.0008%F temp. effect on output
5 Integral Cable (custom lengths available upon request)
E74 NIST Traceable Calibration Certificate
The MBP series load cells provide the same performance specifications as the MB series with the added safeguard of internal overload protection. This patended overload protection is accomplished via hard stops that are EDM machined into the load cell flexure. This provides a greater overload protection (2.5-10lbf +/-1000% of full scale capacity, 100 N +/-500% of full scale capacity) giving the user added protection in more severe applications.
Proprietary Interface temperature compensated strain gages
10x overload protection
Low height - 1in max
0.0008%F temp. effect on output
5 Integral Cable (custom lengths available upon request)
E74 NIST Traceable Calibration Certificate
The MBP series load cells provide the same performance specifications as the MB series with the added safeguard of internal overload protection. This patended overload protection is accomplished via hard stops that are EDM machined into the load cell flexure. This provides a greater overload protection (2.5-10lbf +/-1000% of full scale capacity, 100 N +/-500% of full scale capacity) giving the user added protection in more severe applications.
Bending beam load cell / fatigue-rated / with overload protection - 10 - 50 N | MBI
Proprietary Interface temperature compensated strain gages
...
...
Bending beam load cell / fatigue-rated / with overload protection - 10 - 50 N | MBI
Proprietary Interface temperature compensated strain gages
...
...
Bending beam load cell / mini / hermetically-sealed - max. 1 klb | SSB
Sealed version of MB mini beam.
Proprietary Interface...
Proprietary Interface...
Bending beam load cell / mini / hermetically-sealed - max. 1 klb | SSB
Sealed version of MB mini beam.
Proprietary Interface temperature compensated strain gages
0.01% nonrepeatability
400% compression overload protection
0.0008%/ 5 kN 10 ft Integral Cable Included
Proprietary Interface temperature compensated strain gages
0.01% nonrepeatability
400% compression overload protection
0.0008%/ 5 kN 10 ft Integral Cable Included
Deflection load cell / tension/compression / S-beam - max. 5 kN | SM series
Low-deflection / better test results
Proprietary Interface temperature compensated strain...
Proprietary Interface temperature compensated strain...
Deflection load cell / tension/compression / S-beam - max. 5 kN | SM series
Low-deflection / better test results
Proprietary Interface temperature compensated strain...
Proprietary Interface temperature compensated strain...
Single-point load cell / aluminium / thin - 5 - 50 kg, IP 65 | AF series
The AF Series, manufactured by Laumas Elettronica, is a single point load...
Single-point load cell / aluminium / thin - 5 - 50 kg, IP 65 | AF series
The AF Series, manufactured by Laumas Elettronica, is a single point load cell that has been constructed out of a special steel structure. It also has a combined error of less than +/- 0.05 % and a protection degree of IP 65. Furthermore, the product has an accuracy rate of C3.
Aluminum single point load cell - 0.25 - 1 kg, IP 65 | AS series
The AS series, engineered by Laumas Electtronica, is a single-point...
Aluminum single point load cell - 0.25 - 1 kg, IP 65 | AS series
The AS series, engineered by Laumas Electtronica, is a single-point load cell for platforms 220 x 200 mm. The device is equipped aluminum alloy load cell and is enclosed in an IP 65 protection class. The device also features a combined error of < +/- 0.03%.
Aluminum single point load cell - 3 - 50 kg, IP 65 | ALL series
5The ALL load cell from Laumas Elettronica is engineered from alloy aluminum....
Aluminum single point load cell - 3 - 50 kg, IP 65 | ALL series
5The ALL load cell from Laumas Elettronica is engineered from alloy aluminum. This product is graded with an IP 65 protection rating, and a C3, C4, or C5 accuracy class in accordance with OIML R60 standards. It is also ideally used for platforms with measurements of 250 x 350 mm.
Single-point load cell / stainless steel - 6 - 50 kg, IP 67 | PRC series
The PRC, manufactured by Laumas Elettronica, is a single point load cell ideally...
Single-point load cell / stainless steel - 6 - 50 kg, IP 67 | PRC series
The PRC, manufactured by Laumas Elettronica, is a single point load cell ideally used for platforms with a 350 x 350 mm dimension. It also has a combined error of less than +/- 0.02 % and a protection degree of IP67. Furthermore, this product has an accuracy class C3 and a stainless steel 420 construction.
Single-point load cell / aluminium / thin - max. 50 kg, IP 65 | AU series
The AU Series, manufactured by Laumas Elettronica, is a single point load...
Single-point load cell / aluminium / thin - max. 50 kg, IP 65 | AU series
The AU Series, manufactured by Laumas Elettronica, is a single point load cell that has been constructed out of an alloy aluminum structure. It also has a combined error of less than +/- 0.02 % and a protection degree of IP 65. Furthermore, this product has an accuracy rate of C3.