+7 (812) 645-08-06
Vibrating level switches
select brand
Vibrating level switch - LVL series
This level measurement unit works with a vibrating fork that has a damped process when the fork gets in contact with...
Vibrating level switch - LVL series
This level measurement unit works with a vibrating fork that has a damped process when the fork gets in contact with the medium.
It uses an electronic system to find the switching signal in order to adjust the medium as needed, and has two paddles on a vibrating fork to resonate at specific frequencies. The unit works in rising liquid to reduce the intensity of vibration. The change will be electronically reviewed as the switching signal is created.
It uses an electronic system to find the switching signal in order to adjust the medium as needed, and has two paddles on a vibrating fork to resonate at specific frequencies. The unit works in rising liquid to reduce the intensity of vibration. The change will be electronically reviewed as the switching signal is created.
Vibrating level switch / for liquids - 40 mm, -40 °C ... +150 °C, -1 ... +64 bar | SITRANS LVL100
SITRANS LVL100, a compact vibrating level switch is just perfect for liquid applications like overflow, high, low and demand applications and pump protection. Its small size makes it perfect for confined spaces,...
Vibrating level switch / for liquids - 40 mm, -40 °C ... +150 °C, -1 ... +64 bar | SITRANS LVL100
SITRANS LVL100, a compact vibrating level switch is just perfect for liquid applications like overflow, high, low and demand applications and pump protection. Its small size makes it perfect for confined spaces, especially while working in all areas of process technology in industrial uses. The insertion length of 40 mm (1.57) helps LVL100 to be mounted in small pipes and within space constraints. An advantage of the device is that it doesn't get affected by physical and chemical properties of liquids. Its features and construction makes it just ideal for turbulence, air bubbles, foam generation, buildup, or strong external vibration. The piezoelectrically energized tuning fork vibrates at the mechanical resonance frequency of about 1200 Hz. A change in vibration frequency occurs when you cover the tuning fork with a medium.
Vibrating level switch / for liquids - 0.04 - 4 m, -50 °C ... +250 °C | SITRANS LVL200
SITRANS LVL-200 is designed for an industrial setting and is used in all areas of process technology. This equipment works with liquids and slurries and various applications such as overflow, demanding applications...
Vibrating level switch / for liquids - 0.04 - 4 m, -50 °C ... +250 °C | SITRANS LVL200
SITRANS LVL-200 is designed for an industrial setting and is used in all areas of process technology. This equipment works with liquids and slurries and various applications such as overflow, demanding applications...
Vibrating level switch / for solids / compact - 0.17 - 2 m, -40 °C ... +150 °C | SITRANS LVS100
SITRANS LVS100 is a vibrating point level switch for bulk solids extensively used to detect high, low or demand levels of dry bulk solids in bins, silos or hoppers. The compact designed switch can be top, side, or angle mounted....
Vibrating level switch / for solids / compact - 0.17 - 2 m, -40 °C ... +150 °C | SITRANS LVS100
SITRANS LVS100 is a vibrating point level switch for bulk solids extensively used to detect high, low or demand levels of dry bulk solids in bins, silos or hoppers. The compact designed switch can be top, side, or angle mounted. The vibrating fork design ensures that the tines are kept clean. The switch features a uniquely designed fork and crystal assembly which significantly eliminates false high level readings even if tines become damaged.
A signal from the electronic circuit excites a crystal in the probe that causes the fork to vibrate. In cases where the fork contains a covered material, the electronic circuitry detects the change in vibration which causes the relay to change state after a one second delay. Full vibration is resumed when the fork is free from material pressure causing the relay to revert to its normal condition.
A signal from the electronic circuit excites a crystal in the probe that causes the fork to vibrate. In cases where the fork contains a covered material, the electronic circuitry detects the change in vibration which causes the relay to change state after a one second delay. Full vibration is resumed when the fork is free from material pressure causing the relay to revert to its normal condition.
Vibrating level switch / for solids / compact - 0.165 - 20 m, -40 °C ... +150 °C | SITRANS LVS200
The SITRANS LVS200 by Siemens is a vibrating point level switch for high bulk material loads and has a high resistance to mechanical forces. It is initially designed to disregard...
Vibrating level switch / for solids / compact - 0.165 - 20 m, -40 °C ... +150 °C | SITRANS LVS200
The SITRANS LVS200 by Siemens is a vibrating point level switch for high bulk material loads and has a high resistance to mechanical forces. It is initially designed to disregard liquids in order to discover the interface between a solid and a liquid; it has an optional detection of solids within liquid. This instrument has a compact design that can be top, side or angle mounted. It is uniquely designed to eradicate false high level readings even when tines become damaged and it has an optional 4 to 20 mA output for monitoring buildup on the fork to determine when preventative maintenance should be performed in sticky applications. Also, a pipe extension version is available.
Vibrating level switch - max. 64 bar | 8111 series, 8112 series
The Type 8111 HiSENS is specifically designed to function as a vibrating level switch...
Vibrating level switch - max. 64 bar | 8111 series, 8112 series
The Type 8111 HiSENS is specifically designed to function as a vibrating level switch that is mainly applied for food and beverage industries. It is also applied in most typical applications where in there are overfill and dry run operations, most importantly having ATEX qualification approvals to prove best compliances.
Vibrating level switch - max. 64 bar, IP65 | 8110 series
The top of the line Type 8110 is a level sensor that can be universally used...
Vibrating level switch - max. 64 bar, IP65 | 8110 series
The top of the line Type 8110 is a level sensor that can be universally used particularly in overfill or dry run protection system. This tool has the smallest mounting dimensions unlike any other level sensor and it can be easily installed and setup without the need for any adjustment.
Vibrating level switch - 200 - 1000 mm, IP66/IP67 | 8112 series
This tool is a vibrating level switch equipped with an extension tube that is suitable...
Vibrating level switch - 200 - 1000 mm, IP66/IP67 | 8112 series
This tool is a vibrating level switch equipped with an extension tube that is suitable for all applications particularly for overfill or dry run protection system along with food and beverage industry due to a < 0.8 μm surface finishing. It has ATEX approvals and can be setup without adjustment.