Ultrasonic flow meters

select brand


FLEXIM

Ultrasonic flow meter / for liquids / clamp-on / portable - NEMA 4X / IP65 EN60529

The new FLUXUS F601 is based on the vastly used, dependable and flexible G601 and has been particularly designed for usage in harmful spaces. This ATEX certified device is the perfect solution for gas flow calculation in prospective combustible...

Ultrasonic flow meter / for liquids / clamp-on / portable - NEMA 4X / IP65 EN60529

The new FLUXUS F601 is based on the vastly used, dependable and flexible G601 and has been particularly designed for usage in harmful spaces. This ATEX certified device is the perfect solution for gas flow calculation in prospective combustible spaces even for a short-term exchange of a stable flow meter, check metering or service operations.

Owing to its certification, operators are no longer needed to obtain a Hot Work Permit which makes access to ATEX zones more smooth and time-saving. The highly resistant carbon fibre body along with robust transducer structure, guarantees a greater impact safety and protection from oil, water and other fluids. The FLUXUS F601 has a similar battery management as the F601 providing over hours of remote measurement span, The measurement system can be totally installed in five minutes owing to the instinctive operator guidance and the automated transducer recognition.

Ultrasonic flow meter / for liquids / intrinsically safe - ATEX, IP65 | FLUXUS® F608

The new FLUXUS F608 is based on the vastly used, dependable and flexible G601 and has been particularly designed for usage in harmful spaces. This ATEX certified device is the perfect solution for gas flow calculation in prospective...

Ultrasonic flow meter / for liquids / intrinsically safe - ATEX, IP65 | FLUXUS® F608

The new FLUXUS F608 is based on the vastly used, dependable and flexible G601 and has been particularly designed for usage in harmful spaces. This ATEX certified device is the perfect solution for gas flow calculation in prospective combustible spaces even for a short-term exchange of a stable flow meter, check metering or service operations.

Owing to its certification, operators are no longer needed to obtain a Hot Work Permit which makes access to ATEX zones more smooth and time-saving. The highly resistant carbon fibre body along with robust transducer structure, guarantees a greater impact safety and protection from oil, water and other fluids. The F608 has a similar battery management as the F601 providing over hours of remote measurement span, The measurement system can be totally installed in five minutes owing to the instinctive operator guidance and the automated transducer recognition.

Ultrasonic flow meter / for liquids / clamp-on / clamp-on - IP65 | FLUXUS® ADM 5107

The FLUXUS® ADM 5107 Series of Non-Invasive Clamp-On Ultrasonic Flow Meter, manufactured by FLEXIM is designed for the...

Ultrasonic flow meter / for liquids / clamp-on / clamp-on - IP65 | FLUXUS® ADM 5107

The FLUXUS® ADM 5107 Series of Non-Invasive Clamp-On Ultrasonic Flow Meter, manufactured by FLEXIM is designed for the...

Ultrasonic flow meter / for gas / for liquids / clamp-on - ATEX | FLUXUS® G709

The FLUXUS® G709 Model is a non-invasive clamp-on ultrasonic flow meter developed by Flexim. It is built suitable for gas and liquid applications....

Ultrasonic flow meter / for gas / for liquids / clamp-on - ATEX | FLUXUS® G709

The FLUXUS® G709 Model is a non-invasive clamp-on ultrasonic flow meter developed by Flexim. It is built suitable for gas and liquid applications....

Ultrasonic flow meter / for liquids / clamp-on / clamp-on - NEMA 4X | FLUXUS® ADM 7407

The FLUXU F704, manufactured by Flexim is a device for ultrasonic flow meter for permanent installation. It is characterized for its metal field casing.

Its permanent...

Ultrasonic flow meter / for liquids / clamp-on / clamp-on - NEMA 4X | FLUXUS® ADM 7407

The FLUXU F704, manufactured by Flexim is a device for ultrasonic flow meter for permanent installation. It is characterized for its metal field casing.

Its permanent liquid flow meter is applied to difficult measurement points where other meters fail. Due to the Hybrid trek Mode implemented in the flow computer, liquids containing a high content of solid particles or gaseous loads can be metered.

The flowmeter's transcuders never go together to medium to be measured and they are not submitted to wear and tear. In addition, it can handle a variety of process parameters within liquid flow metering applications. Effective applications of the unit invlude fields with wet or liquid phases.
FUJI ELECTRIC France

Ultrasonic flow meter / for liquids / clamp-on / cost-effective - Time DELTA-C

Fuji Electronic presents Time Delta-C flowmeter of ultrasonic-fixed type. They comprise of two sensors fixed on the pipe and a remote mounted digital converter. Based on the sensors, the...

Ultrasonic flow meter / for liquids / clamp-on / cost-effective - Time DELTA-C

Fuji Electronic presents Time Delta-C flowmeter of ultrasonic-fixed type. They comprise of two sensors fixed on the pipe and a remote mounted digital converter. Based on the sensors, the pipe can have nominal diameter between 13 to 6000 mm. They can measure flow speeds in both directions within -32 to +32 m/s. The flowmeter is equipped with a display and a built-in keyboard, which enable the user to configure and monitor all settings.

Additionally, they have several additional features such as output of 4-20 mA, a a totalization feature, and an automatic change of range. They also have 2 alarms, 2 contact outputs which can be configured by the user, and a relay output. Both the converter and the sensors are rated IP66.
Hoffer Flow Controls

Ultrasonic flow meter / for liquids - IP67, max. 580 psig, 41 - 131 °F | AC

The Hoffer Ultrasonic flow meters from the Transi-Flo I single beam and dualbeam type series can be used for measuring conductive, non-conductive and aggressive...

Ultrasonic flow meter / for liquids - IP67, max. 580 psig, 41 - 131 °F | AC

The Hoffer Ultrasonic flow meters from the Transi-Flo I single beam and dualbeam type series can be used for measuring conductive, non-conductive and aggressive liquid flow rate. The meter works on the principle of measuring difference in transit times of ultrasonic waves that are traveling in and against the direction of fluid flow.

The Hoffer Ultrasonic flow meters come with a flow sensor and also an associated electronic unit. The equipment offers high measurement accuracy in a wide range of flow rates. It is stable and shows very low pressure losses. The unit can measure the flow rate of any liquid medium.

Ultrasonic flow meter / for liquids / with battery - IP67, 0 - 55 °C, RS232 | Transi-Flo II

The Hoffer Ultrasonic battery powered flow meters from the Transi-Flo II Series is able to measure and store instantaneous flow rate and also the total volume that passes through the meter. It can be used in various...

Ultrasonic flow meter / for liquids / with battery - IP67, 0 - 55 °C, RS232 | Transi-Flo II

The Hoffer Ultrasonic battery powered flow meters from the Transi-Flo II Series is able to measure and store instantaneous flow rate and also the total volume that passes through the meter. It can be used in various applications such as cold or hot water in accordance to OIML R49-1 and other liquids similar in nature in water and other industrial applications. The meter can also be fitted with pressure gauges to monitor fluid pressure inside piping.

The Hoffer Ultrasonic battery powered flow meters offer high levels of accuracy and reliability. This flow meter does not require external power. It also does not include any moving part and features significantly lower power drops. The meter comes with an electronic unit for processing sensor signal. This unit also displays instantaneous flow rate and total flow.
{{item.name}}