+7 (812) 645-08-06
Capacitive level sensors
select brand
Capacitive level sensor / for liquids - IP65 | CPLS 1000
The CPLS1000 is manufactured by New Flow. It is a level switch system, with an aluminum alloy housing that is explosion...
Capacitive level sensor / for liquids - IP65 | CPLS 1000
The CPLS1000 is manufactured by New Flow. It is a level switch system, with an aluminum alloy housing that is explosion...
Capacitive level sensor / fuel tank - 700 - 1 500 mm | LLS-20160
There are several applications supported by this product, ranging from road vehicles and buses to diesel generators, heavy equipment and construction machines. This digital fuel level sensor is type LLS-20160, being dedicated...
Capacitive level sensor / fuel tank - 700 - 1 500 mm | LLS-20160
There are several applications supported by this product, ranging from road vehicles and buses to diesel generators, heavy equipment and construction machines. This digital fuel level sensor is type LLS-20160, being dedicated to connection to the GSM/GPS tracker, as well as to remote terminal units using the serial input RS 232/EIA-485.
The communications protocol must be implemented beforehand, while the item is a fuel level sensor that comes with digital interfaces of type RS232 and EIA485. These provide high noise immunity, as well as data transfer accuracy, being known for the maximum resolution of measurement. The sensor comes with a high degree of power supply protection, which includes the use of enhanced electrical insulation. The sensors are delivered with probe lengths between 700 and 1,500mm, while the probe can be trimmed according to the fuel tank's depth.
The communications protocol must be implemented beforehand, while the item is a fuel level sensor that comes with digital interfaces of type RS232 and EIA485. These provide high noise immunity, as well as data transfer accuracy, being known for the maximum resolution of measurement. The sensor comes with a high degree of power supply protection, which includes the use of enhanced electrical insulation. The sensors are delivered with probe lengths between 700 and 1,500mm, while the probe can be trimmed according to the fuel tank's depth.
Capacitive level sensor / fuel tank - 1500 - 6 000 mm | LLS-20230
The LLS 20230 fuel level sensor can be used for storing fuels it can act as a storage fuel tank, mobile fuel tank, and road tanker. It is made to be connected...
Capacitive level sensor / fuel tank - 1500 - 6 000 mm | LLS-20230
The LLS 20230 fuel level sensor can be used for storing fuels it can act as a storage fuel tank, mobile fuel tank, and road tanker. It is made to be connected to GPS or GSM tracker or to a remote terminal unit, also known as RTU, with a serial input of RS 232/EIA-485. The tank can be used in hazardous areas because of its secured design.
Implementation of an Omnicomm communication protocol should be done beforehand. The sensors are included with a standard probe length that ranges from a minimum of 1,500 mm up to a maximum of 6,000 mm, and the probe can be cut in accordance with fuel tank's height.
Implementation of an Omnicomm communication protocol should be done beforehand. The sensors are included with a standard probe length that ranges from a minimum of 1,500 mm up to a maximum of 6,000 mm, and the probe can be cut in accordance with fuel tank's height.
Capacitive level sensor / fuel tank - 700 - 1 500 mm | LLS-AF-20310
The LLS-AF 20310 Fuel Level Sensor can be used in road cars, buses, heavy devices, diesel generator, and construction machinery. It is made to be connected...
Capacitive level sensor / fuel tank - 700 - 1 500 mm | LLS-AF-20310
The LLS-AF 20310 Fuel Level Sensor can be used in road cars, buses, heavy devices, diesel generator, and construction machinery. It is made to be connected to GPS or GSM tracker, or to a remote terminal unit also known as RTU, with an analog voltage input. The sensor delivers flexibility of adjusting limits and properties of the analog voltage.
Implementation of an Omnicomm communication protocol should be done beforehand. The sensor is included with a standard probe length that ranges from a minimum of 1,500 mm up to a maximum of 6,000 mm, and the probe can be cut in accordance with fuel tank's height.
Implementation of an Omnicomm communication protocol should be done beforehand. The sensor is included with a standard probe length that ranges from a minimum of 1,500 mm up to a maximum of 6,000 mm, and the probe can be cut in accordance with fuel tank's height.
Capacitive level sensor / for solids and liquids - KFS / KFA / KFX
RECHNER Captive Level Measurement Systems operate on the three-electrode principal.An additional electrode (here the container) serves as a counter-electrode to the probe electrodes. Thus it makes it essential...
Capacitive level sensor / for solids and liquids - KFS / KFA / KFX
RECHNER Captive Level Measurement Systems operate on the three-electrode principal.An additional electrode (here the container) serves as a counter-electrode to the probe electrodes. Thus it makes it essential for this system to have a conductive material container or a "substitute electrode" to be fixed on the container wall like copper foil. So the systems are equipped with probes for analogue filling level measurement of for detection of 1, 2 or 3 measuring points. User-definable analogue measuring area and switching points position are within the possible measuring range and thus can be optimally matched for individual application. Supports applications which require level measurements, with a dielectric constant as of Er 1,1., of bulk material like liquids or pastes are possible.
Capacitive level transmitter / for solids and liquids - KFS / KFA / KFX
The capacitive filling level system follows the three-electrode principle and can act as a counter-electrode to the probe electrodes. This system requires the container to be made...
Capacitive level transmitter / for solids and liquids - KFS / KFA / KFX
The capacitive filling level system follows the three-electrode principle and can act as a counter-electrode to the probe electrodes. This system requires the container to be made of a conductive material. Alternatively, a 'substitute electrode' may be attached to the container wall. The system may be customized with probes for different applications such as probes for analogue filling level measurement of for detection of 1, 2 or 3 measuring points.
The system comes with configurable position of the switching points and the analogue measuring area. These parameters may be set within the possible effective range. The instrument can also be used for measuring bulk materials, paste or liquids.
The system comes with configurable position of the switching points and the analogue measuring area. These parameters may be set within the possible effective range. The instrument can also be used for measuring bulk materials, paste or liquids.