+7 (812) 645-08-06
Capacitive level sensors
select brand
Capacitive level sensor / for solids and liquids - 48 x 20 x 14 mm, 12 mm, IP65/67 | KQ6 series
The capacity sensor reduces type versions from IFM. They are position sensors that are ready to use at a push of a button. Comes in 4 types, the KQ series can...
Capacitive level sensor / for solids and liquids - 48 x 20 x 14 mm, 12 mm, IP65/67 | KQ6 series
The capacity sensor reduces type versions from IFM. They are position sensors that are ready to use at a push of a button. Comes in 4 types, the KQ series can detect bulk materials or liquids through non-metallic materials. These capacitive sensors can either be fixed on a flat surface or on tubes using mounting brackets and cable ties. Setting up the KQ series is easy. The new operating concept of the KQ series enables its setting and adjustments of the output function by pressing a button. The automatic detection of the load makes it easy to connect to common controllers. For more details, you can visit IFM's company page.
Capacitive level sensor / for liquids - 8 mm, IP65/67 | KG5 series
This model features transparent capacitive sensors, which can be easily adjusted simply by holding down a push button. It detects NPN and PNP output loads automatically and users can easily and freely open and close....
Capacitive level sensor / for liquids - 8 mm, IP65/67 | KG5 series
This model features transparent capacitive sensors, which can be easily adjusted simply by holding down a push button. It detects NPN and PNP output loads automatically and users can easily and freely open and close. The switching is clearly visible and the noises are greatly reduced. The type KG506x range of sensors are geared to detect conductive media via bypasses or non metal walls. They are generally used to detect the overflow of tanks, leakages and at the minimum level.
These devices boast a new operating concept , which activates output function adjustment and settings simply by holding down the push button. Configuration and set up with other evaluation units are simplified owing to the automatic load detection feature. This device is best suited for excellent detection of conducive substances with a dielectric current.
These devices boast a new operating concept , which activates output function adjustment and settings simply by holding down the push button. Configuration and set up with other evaluation units are simplified owing to the automatic load detection feature. This device is best suited for excellent detection of conducive substances with a dielectric current.
Capacitive level sensor / for solids and liquids - Type M30
These are capacitive sensors which may be used for detecting granulates.
Push button press can allow easy adjustment to the application.
PNP/NPN output loads are automatically detected.
The option of normally open/close...
Push button press can allow easy adjustment to the application.
PNP/NPN output loads are automatically detected.
The option of normally open/close...
Capacitive level sensor / for solids and liquids - Type M30
These are capacitive sensors which may be used for detecting granulates.
Push button press can allow easy adjustment to the application.
PNP/NPN output loads are automatically detected.
The option of normally open/close can be selected.
The switching status indication is clearly visible.
It is electrostatic discharge resistant.
It can be used in industries where the processing and conveyance of granulates are performed. The levels in pipes and silos can be monitored through the capacitive sensors. Sight glasses in the loaders, on the injection molding machines can also be used to monitor levels. Detection of different and wide ranges of plastic by the sensor is important.
The connection to common controllers is simplified by the automatic load detection. It may be used for plastic granulates and bulk material detection through the non metallic walls of the vessel.
Push button press can allow easy adjustment to the application.
PNP/NPN output loads are automatically detected.
The option of normally open/close can be selected.
The switching status indication is clearly visible.
It is electrostatic discharge resistant.
It can be used in industries where the processing and conveyance of granulates are performed. The levels in pipes and silos can be monitored through the capacitive sensors. Sight glasses in the loaders, on the injection molding machines can also be used to monitor levels. Detection of different and wide ranges of plastic by the sensor is important.
The connection to common controllers is simplified by the automatic load detection. It may be used for plastic granulates and bulk material detection through the non metallic walls of the vessel.
Capacitive level transmitter / for liquids - max. 3 000 mm | CapFox® EFT 7
This device is perfectly suited for material that is non...
Capacitive level transmitter / for liquids - max. 3 000 mm | CapFox® EFT 7
This device is perfectly suited for material that is non conductive such as diesel fuel and fuel oil. The band electrode can be cut short on site as needed. The rod probe is available whenver the tank height is over 200 m.
Capacitive level transmitter / for solids and liquids - max. 12 000 mm | CapFox® EFM 7 series
This device requires absolutely no programming. It is simple to adjust via the included potentiometer,...
Capacitive level transmitter / for solids and liquids - max. 12 000 mm | CapFox® EFM 7 series
This device requires absolutely no programming. It is simple to adjust via the included potentiometer, and is ideal for not only liquid and powdery media, but also electrically conductive or non-conductive media as well.
It has a variety of different probes that are offered to customers. This allows an optimal adaptation to application conditions.
It has a variety of different probes that are offered to customers. This allows an optimal adaptation to application conditions.
Capacitive level transmitter / for solids and liquids - 5.5 - 25 m, -40 °C ... +200 °C, max. 35 bar | SITRANS LC300
The SITRANS LC300 is equipped with an inverse frequency shift capacitance continuous level transmitter that is ideal for solids and liquids applications. It is suitable for industrial...
Capacitive level transmitter / for solids and liquids - 5.5 - 25 m, -40 °C ... +200 °C, max. 35 bar | SITRANS LC300
The SITRANS LC300 is equipped with an inverse frequency shift capacitance continuous level transmitter that is ideal for solids and liquids applications. It is suitable for industrial applications in food and beverage, mining, aggregate and cement, hydrocarbon processing and chemical industries. It has a 2-wire level measurement that combines a modern but user-friendly microprocessor with probes that are field-proven. It is available in cable and rod versions. The process connection is stainless steel and has a probe with PFA lining. It accurately measures high or low dielectric materials. It is equipped with a patented Active-Shield technology that ignores the presence of buildup near the vessel nozzle.
Capacitive level transmitter / for solids and liquids - 5.5 - 35 m, -50 °C ... +200 °C, max. 150 bar | SITRANS LC500
Sitrans is an interface transmitter developed by Siemens. This is a device that is designed to cater to the requirements of pressure conditions that are critical and extreme. It is used along...
Capacitive level transmitter / for solids and liquids - 5.5 - 35 m, -50 °C ... +200 °C, max. 150 bar | SITRANS LC500
Sitrans is an interface transmitter developed by Siemens. This is a device that is designed to cater to the requirements of pressure conditions that are critical and extreme. It is used along...