+7 (812) 645-08-06
Spectrum analyzers, signal analyzers
select brand
Frequency response analyzer - FRAnalyzer
FRAnalyzer (Frequency Response Analyzer) is used to ensure that windings in power transformers are not damaged due to transportation or occurrence of high currents.short circuits, , or in occurrence of highly transient...
Frequency response analyzer - FRAnalyzer
FRAnalyzer (Frequency Response Analyzer) is used to ensure that windings in power transformers are not damaged due to transportation or occurrence of high currents.short circuits, , or in occurrence of highly transient fault currents and in a significant change in the monitored values (e.g. combustible gases) or a safety shutdown. Alternatively it can be used for routine transformer condition measurement and verification of unusual events determined during conventional testing. It improves transformer reliability by detection of winding defects/faults in the magnetic core reducing costs and averting costly failures. It was developed using the SFRA principle (Sweep Frequency Response Analysis) It performs a frequency response test for winding diagnostics on power transformers
Frequency response analyzer - 10 µHz - 1 MHz | 1255B
The Model 1255B is a frequency response analyzer from Solaton which is used to provide precise measurement of gain and phase between any two points in a system. It provides a fully digital technique...
Frequency response analyzer - 10 µHz - 1 MHz | 1255B
The Model 1255B is a frequency response analyzer from Solaton which is used to provide precise measurement of gain and phase between any two points in a system. It provides a fully digital technique that is used to evaluate the performance of both simple and complex systems. This analyzer has a simple yet sleek design and delivers a fast and precise performance. It is easy to operate and can be used by untrained personnel.
The 1255B is used in electrochemistry as corrosion protection, properties of organic and inorganic coatings and films, development of slid electrolytes for oxygen sensors, development of novel anode/cathode materials and electrolytes, and studies of animal and plant tissue properties, as well as photoelectric effects.
The 1255B is used in electrochemistry as corrosion protection, properties of organic and inorganic coatings and films, development of slid electrolytes for oxygen sensors, development of novel anode/cathode materials and electrolytes, and studies of animal and plant tissue properties, as well as photoelectric effects.
Frequency response analyzer - 10 µHz - 300 MHz | 1252A
The 1252A Frequency Response Analyzer is one of a line of devices that match application requirements. By the use of the single sine technique, the unit delivers accuracy in measuring gain and phase...
Frequency response analyzer - 10 µHz - 300 MHz | 1252A
The 1252A Frequency Response Analyzer is one of a line of devices that match application requirements. By the use of the single sine technique, the unit delivers accuracy in measuring gain and phase between any two points in a system.
This fully digital technique can be used to evaluate the performance of both simple and complex systems, may it be mechanical, electronic and electrochemical. For over 30 years, Solartron Analytical has manufactured frequency response analyzers, which are considered industry standards.
Based on this knowledge and experience, Solartron Analytical was able to create the 1252A, with a 300kHz frequency range and frequency resolution. In addition, the unit utilizes the power and simplicity of modern measurement technology.
This fully digital technique can be used to evaluate the performance of both simple and complex systems, may it be mechanical, electronic and electrochemical. For over 30 years, Solartron Analytical has manufactured frequency response analyzers, which are considered industry standards.
Based on this knowledge and experience, Solartron Analytical was able to create the 1252A, with a 300kHz frequency range and frequency resolution. In addition, the unit utilizes the power and simplicity of modern measurement technology.
Frequency response analyzer - 0.1 Ω - 1 MΩ | 1280C
The Solartron 1280Z Electrochemical Test Systemis capable of providing an optimum precision, wide bandwidth, potentiostat / galvanostat and FRA (frequency response analyzer) in just a single compact unit. The two high resolution...
Frequency response analyzer - 0.1 Ω - 1 MΩ | 1280C
The Solartron 1280Z Electrochemical Test Systemis capable of providing an optimum precision, wide bandwidth, potentiostat / galvanostat and FRA (frequency response analyzer) in just a single compact unit. The two high resolution digital voltmeters are Measurement Integrity Central to the measurement capability of 1280Z that provides synchronized electrical energy and current measurements.
The device is specifically designed with Solartrons patented pulse width conversion technique; therefore it has high accuracy, stability and linearity all through the entire range of the instrument. It has 2-terminal techniques for general materials / electrochemical testing and 3-terminal techniques for corrosion / coating applications. The 4-terminal techniques are used for accurate characterization of batteries and fuel cells, enabling lead resistance and impedance effects to be minimized.
The device is specifically designed with Solartrons patented pulse width conversion technique; therefore it has high accuracy, stability and linearity all through the entire range of the instrument. It has 2-terminal techniques for general materials / electrochemical testing and 3-terminal techniques for corrosion / coating applications. The 4-terminal techniques are used for accurate characterization of batteries and fuel cells, enabling lead resistance and impedance effects to be minimized.
Frequency response analyzer - 10 µHz - 20 MHz | 1255A
The model 1255A Frequency Response Analyzer works on a single sine technique for precise measurement of gain and phase between any two points in a system. For more than 30 years Solartron...
Frequency response analyzer - 10 µHz - 20 MHz | 1255A
The model 1255A Frequency Response Analyzer works on a single sine technique for precise measurement of gain and phase between any two points in a system. For more than 30 years Solartron Analytical is known to produce frequency response analyzers, instruments with high quality industrial standards. A unique blend of rich knowledge and experience has led to the production of 1255A that is imbibed with excellent 20 MHz frequency range and 1 in 65 million frequency resolution. It is one of the high standard instrument designed to meet all the present and future needs. The fully digital technique is extensively used for performance assessment of simple and complex systems, mechanical, electronic and electrochemical.
Frequency response analyzer - 10 µHz - 65 kHz | 1250B
The model 1250B from Solarton is a frequency response analyzer that sends an definite measurement of gain and phase....
Frequency response analyzer - 10 µHz - 65 kHz | 1250B
The model 1250B from Solarton is a frequency response analyzer that sends an definite measurement of gain and phase. The machine under test is triggered by a sinewave and the reaction determined at one, two, or more points in the system. These reactions are again compared with the stimulus to define the amplitude and phase relative to the generator. The ratio of the two calculated signals can then be applied to produce the system transport function.
Spectrum analyzer / optical - DF-5735
The DF-5735 Series is manufactured as on-line detector that is ideal for steel system mining plants, ore treatment plants, and the like. Plus, it is used as an ore detector and power belt conveyor....
Spectrum analyzer / optical - DF-5735
The DF-5735 Series is manufactured as on-line detector that is ideal for steel system mining plants, ore treatment plants, and the like. Plus, it is used as an ore detector and power belt conveyor. It provides a speedy and precise measurement to enhance the level of automation for the result of sintering and burdening. Its purpose is to guarantee a quality iron product and labor-cost reduction. Furthermore, the pairing effect of the electron and compton scattered photons ratify the measurement merging. The interaction of the iron atoms and high-energy γ rays creates an excellent electron pairing unlike the other ore elements. Plus, by analyzing the spectrum blending of the annihilated radiation and proton scattering, it can acquire the value of the iron grade.
Spectrum analyzer - DF-6811A
The DF-6811A by Dandong Dongfang Measurement & Control Technology is a Spectrum analyzer which comes with audio frequency, electrons and software. This tool is the ideal equipment...
Spectrum analyzer - DF-6811A
The DF-6811A by Dandong Dongfang Measurement & Control Technology is a Spectrum analyzer which comes with audio frequency, electrons and software. This tool is the ideal equipment for non-contact detection which is developed for specific purpose which is mill loading operation. Each of the unit has an international advanced level of function which is ideal for large mining companies. The unit function is based from a special sound frequency which is characterized by presence of collision within a steel ball inside a mill wall. This is the compatible tool for operation that requires best loading condition. Using this, it increases the system's production and reduces the consumption of energy.