+7 (812) 645-08-06
Electronic loads
select brand
Electronic load AC - max. 750 A, 400V
This liquid cooled load allows a wide range of operation up to 400V / 750A. The small size provides...
Electronic load AC - max. 750 A, 400V
This liquid cooled load allows a wide range of operation up to 400V / 750A. The small size provides high power density combined with high ease of use. Wherever heat and noise of fans is unacceptable, this load offers a perfect solution, e.g. laboratory or test rooms. Due to its capability to connect modules in parallel, the power rating can be increased up to 40kW, controllable by one interface.
Electronic load DC - 0.6 - 20 kV
DUMMY/ELECTRONIC LOAD - UP TO 12kV to 24kW
Features
It features an active Solid State design allowing the load to be dynamically varied using a manual
front panel digital potentiometer or remotely using an analogue input signal 0-10VDC. The load is
fully...
Features
It features an active Solid State design allowing the load to be dynamically varied using a manual
front panel digital potentiometer or remotely using an analogue input signal 0-10VDC. The load is
fully...
Electronic load DC - 0.6 - 20 kV
DUMMY/ELECTRONIC LOAD - UP TO 12kV to 24kW
Features
It features an active Solid State design allowing the load to be dynamically varied using a manual
front panel digital potentiometer or remotely using an analogue input signal 0-10VDC. The load is
fully isolated and allows input voltages from 600V to 10,000VDC in either positive or negative
polarity.
The power is dissipated in element cards fitted into a backbone consisting of commonly sourced
semiconductor FET's fitted to aluminum-based printed circuit boards. The arrangement allows
optimum transfer of power into a cooling air flow. A single failure on an element card will not result
in complete failure of the load.
A fan failure will result in a shutdown of the load to a safe condition.
The maximum load current is limited to 2.5Amp with a maximum input voltage of 10kV where the
input power is limited to the power rating of the dummy load.
Manual control of the dummy load impedance is achieved using a front panel digital potentiometer.
Features
It features an active Solid State design allowing the load to be dynamically varied using a manual
front panel digital potentiometer or remotely using an analogue input signal 0-10VDC. The load is
fully isolated and allows input voltages from 600V to 10,000VDC in either positive or negative
polarity.
The power is dissipated in element cards fitted into a backbone consisting of commonly sourced
semiconductor FET's fitted to aluminum-based printed circuit boards. The arrangement allows
optimum transfer of power into a cooling air flow. A single failure on an element card will not result
in complete failure of the load.
A fan failure will result in a shutdown of the load to a safe condition.
The maximum load current is limited to 2.5Amp with a maximum input voltage of 10kV where the
input power is limited to the power rating of the dummy load.
Manual control of the dummy load impedance is achieved using a front panel digital potentiometer.