+7 (812) 645-08-06
Cable testers
select brand
Phase sequence tester - max. 700 V | PRT-100
The PRT-100 is a hand-held tester which simplifies the process of connecting a three-phase motor. It can detect the sequence of a 3-phase power line for proper motor wiring. Phase loss can also be detected without voltage...
Phase sequence tester - max. 700 V | PRT-100
The PRT-100 is a hand-held tester which simplifies the process of connecting a three-phase motor. It can detect the sequence of a 3-phase power line for proper motor wiring. Phase loss can also be detected without voltage...
Cable and phase identification system for de-energized cables - 300 mA, 240 V | FC2300
The FC2300 by Sibille Fameca Electric is a Cable and phase identification system designed for de-energized cables. The unit detects certain cable by using a remote cable spiking...
Cable and phase identification system for de-energized cables - 300 mA, 240 V | FC2300
The FC2300 by Sibille Fameca Electric is a Cable and phase identification system designed for de-energized cables. The unit detects certain cable by using a remote cable spiking device which detects all cables that are disconnected. This is the ideal tool to used on a jobsite having disconnected earthed power cables that measure about 10 km long. Also, it uses open trenches, 3 pole and single pole cables for identifying three phase cables and conductors. For its transmitter, it uses 3 injection lamps which are L1, L2 and L3 having an opening of about 50 mm. Plus, it comes with transition cycle of 7 s and a maximum length of voice message about 3.4 s. It uses a battery that can last 8 to 9 hours.
Cable and phase identification system for de-energized cables - FC2100
It is used for Identifying phases and colours on cables that have been disconnected. This instrument lets the phase or color indicators to be verified on power cables that were earthed...
Cable and phase identification system for de-energized cables - FC2100
It is used for Identifying phases and colours on cables that have been disconnected. This instrument lets the phase or color indicators to be verified on power cables that were earthed inside up to 10 km long. The 3 phase conductors on 3 pole or single pole cables with one end short circuited or earthed. It can also be used as the any device of the FC2300, FC2000 and VR900 ranges. It should only be used after the cable is cut or spiked.
It has transmission clamps that can be injected into the 2 phases L1 AND L3. The signals are compatible with the FC2000 cable indentifiers. It has rechargeable battery integrated in the clamps. It can last for more than 8 hours with a full time charge of 3 hours.
It has transmission clamps that can be injected into the 2 phases L1 AND L3. The signals are compatible with the FC2000 cable indentifiers. It has rechargeable battery integrated in the clamps. It can last for more than 8 hours with a full time charge of 3 hours.
Phase sequence tester - 400 V | DR706
This is a phase sequence indicator of the standard model of IEC61557-7 CAT-IV. It is used for the direction of rotation of network of 3 phases.
Main features
It has a voltage rate of 80-400 V in AC
It has a frequency...
Main features
It has a voltage rate of 80-400 V in AC
It has a frequency...
Phase sequence tester - 400 V | DR706
This is a phase sequence indicator of the standard model of IEC61557-7 CAT-IV. It is used for the direction of rotation of network of 3 phases.
Main features
It has a voltage rate of 80-400 V in AC
It has a frequency range of 50 Hz & 60 Hz in AC
Its maximum rated voltage is 44o volts in the 3 phase network.
Its category of use is 600 volts (cat IV) so that there is protection in case of voltage.
its has protection of IP65 OR IP54 according to the requirements
its has exchangeable cords with marking.
The IP65 covering makes it to possible to be used even in the rains. They have a unique LED light readable in the sun. It is very accurately designed to keep in mind the safety of the environment. The design is so portable that it can fit on the palm of one's hand. Its given instruction and simplistic design makes it convenient for the user.
All functions should be performed wearing gloves.
Main features
It has a voltage rate of 80-400 V in AC
It has a frequency range of 50 Hz & 60 Hz in AC
Its maximum rated voltage is 44o volts in the 3 phase network.
Its category of use is 600 volts (cat IV) so that there is protection in case of voltage.
its has protection of IP65 OR IP54 according to the requirements
its has exchangeable cords with marking.
The IP65 covering makes it to possible to be used even in the rains. They have a unique LED light readable in the sun. It is very accurately designed to keep in mind the safety of the environment. The design is so portable that it can fit on the palm of one's hand. Its given instruction and simplistic design makes it convenient for the user.
All functions should be performed wearing gloves.
Cable and phase identification system for live cables - max. 440 V | FC3000
FC3000 Phase controller and departures BT is designed to be handled by a single operator for mapping customer phase and feeder connection in just 5 seconds. The device balance the loads on the phases of the low voltage network. The...
Cable and phase identification system for live cables - max. 440 V | FC3000
FC3000 Phase controller and departures BT is designed to be handled by a single operator for mapping customer phase and feeder connection in just 5 seconds. The device balance the loads on the phases of the low voltage network. The Central Unit (CU) is connected to all the outgoing lines on a supply substation. The Line Unit (LU), connected to any points of the network (customer, connection box, ) is used to automatically provide all the useful information.
The device enables local voltage measurement, phase indication L1, L2 or L3, feeder or circuit From 1 to 6 (9 or 12), substation (CU code.) from 1 to 8 and didactic operating mode on central unit FC3000 UC. The system operates at 200 Vrms voltage, 115 Vrms to 230 Vrms (200 Vrms to 400 Vrms between phases) nominal voltage (phase-neutral) and 440 Vrms (between phases, and between phase and neutral) maximum rated voltage.
The device enables local voltage measurement, phase indication L1, L2 or L3, feeder or circuit From 1 to 6 (9 or 12), substation (CU code.) from 1 to 8 and didactic operating mode on central unit FC3000 UC. The system operates at 200 Vrms voltage, 115 Vrms to 230 Vrms (200 Vrms to 400 Vrms between phases) nominal voltage (phase-neutral) and 440 Vrms (between phases, and between phase and neutral) maximum rated voltage.
Identification system for low-voltage cable - FC5300
The FC5300 is an identifier voltage cable that offers all the information that is needed to distinguish a live LV cable among other cables without risk of error. It involves the identification of cables in open trenches or...
Identification system for low-voltage cable - FC5300
The FC5300 is an identifier voltage cable that offers all the information that is needed to distinguish a live LV cable among other cables without risk of error. It involves the identification of cables in open trenches or tunnels, the identification or confirmation of the source and an upstream and downstream cable discrimination at a given point on the network.
The identifier has a probe with display that guides the user through the steps for every function. The product comes with multiple language such as English, Spanish, German, Polish and Arabic.
The probe that is extremely sensituve enhances the resolution in cable harnesses. The dependable connectors include double-insulated, sheathed conductors depending on the new standards.
The cables work on all types like oil-impregnated paper insulated cables, synthetic cables and stuff.
The identifier has a probe with display that guides the user through the steps for every function. The product comes with multiple language such as English, Spanish, German, Polish and Arabic.
The probe that is extremely sensituve enhances the resolution in cable harnesses. The dependable connectors include double-insulated, sheathed conductors depending on the new standards.
The cables work on all types like oil-impregnated paper insulated cables, synthetic cables and stuff.
Cable detector - max. 2 m | LKZ-700
LKZ-700 is a wire tracer engineered to detect cables and conductors in different environments. This tool can function without disconnecting from any device in tested networks, even...
Cable detector - max. 2 m | LKZ-700
LKZ-700 is a wire tracer engineered to detect cables and conductors in different environments. This tool can function without disconnecting from any device in tested networks, even in a non-voltage environment. This tool is applicable for location of breaks in cables, routes of shorted circuits, and switches and fuses.
It is also functional for possible detection of illegal power consumption. The device is capable of tracing an underground cable course that can reach up to 2m, and conducting of pipes in water or CO installations. The equipment features operation in wide range of rated voltage that can reach up to 500V RMS. It is also provided with three modes of transmitter amplification.
It is also functional for possible detection of illegal power consumption. The device is capable of tracing an underground cable course that can reach up to 2m, and conducting of pipes in water or CO installations. The equipment features operation in wide range of rated voltage that can reach up to 500V RMS. It is also provided with three modes of transmitter amplification.
Phase detector - 120 - 690 V, 10 - 70 Hz | TKF-12
The TKF-12 is a phase detector, manufactured by Sonel S.A. Its phase sequence indication in the power network with...
Phase detector - 120 - 690 V, 10 - 70 Hz | TKF-12
The TKF-12 is a phase detector, manufactured by Sonel S.A. Its phase sequence indication in the power network with rated phase-to-phase voltage AC by LED signalization.
The operation in the power network with frequency range 10 to 70 Hz. Its indication of the voltage presence in the particular phases by neon lamps signalization.
The power supply from the tested network has continuous operation to 15 minutes for max. voltage.
The operation in the power network with frequency range 10 to 70 Hz. Its indication of the voltage presence in the particular phases by neon lamps signalization.
The power supply from the tested network has continuous operation to 15 minutes for max. voltage.
Cable detector - max. 60 cm | LKZ-710
The LKZ-710 is a wire tracer manufactured by Sonel. It is suitable for use in detecting conductors under different environments at low voltage, without disconnecting devices from tested networks.
The...
The...
Cable detector - max. 60 cm | LKZ-710
The LKZ-710 is a wire tracer manufactured by Sonel. It is suitable for use in detecting conductors under different environments at low voltage, without disconnecting devices from tested networks.
The wire tracer detects wires in ceilings, walls, and floors. It locates power points and switches in buildings. In addition, it utilizes an external power source for locating short circuits between leads.
The device traces wires in metal ducts, and identifies fuses on distribution boards. It ensures a non-contact operation when detecting live wires.
The LKZ-710 is equipped with LED and sound for signaling of transmitter, and receiver. It features two modes of transmitter amplification, and an adjustable receiver sensitivity level. The unit operates within a wide voltage rating of 12V DC(24V AC) to 250V.
The wire tracer detects wires in ceilings, walls, and floors. It locates power points and switches in buildings. In addition, it utilizes an external power source for locating short circuits between leads.
The device traces wires in metal ducts, and identifies fuses on distribution boards. It ensures a non-contact operation when detecting live wires.
The LKZ-710 is equipped with LED and sound for signaling of transmitter, and receiver. It features two modes of transmitter amplification, and an adjustable receiver sensitivity level. The unit operates within a wide voltage rating of 12V DC(24V AC) to 250V.