+7 (812) 645-08-06
Probes, transmitters and controllers for liquid analysis
select brand
Dissolved oxygen (DO) transmitter - DO202G
The EXA DO202 Dissolved Oxygen 2-wire transmitter is flexible and reliable, requiring a low level of maintenance. The exacting requirements of Dissolved Oxygen analysis in modern industrial environments have been met by the features...
Dissolved oxygen (DO) transmitter - DO202G
The EXA DO202 Dissolved Oxygen 2-wire transmitter is flexible and reliable, requiring a low level of maintenance. The exacting requirements of Dissolved Oxygen analysis in modern industrial environments have been met by the features incorporated in the device which ensures precision for all applications.
The DO202 is a loop powered 2-wire transmitter housed in a rugged IP65 enclosure. It combines simple and safe wiring, commissioning and installation with the YOKOGAWA EXA microprocessor analyzer family's advanced functionality. The DO202 is a SMART transmitter and it is this function which enables the transmission of diagnostic data, remote configuration of the analyzer, information stored in the logbook and up to four process variables. Either HART protocol which has been superimposed on the 4-20 mA current or Fieldbus digital communication known as Fieldbus Foundation can conduct digital communication.
The DO202 is a loop powered 2-wire transmitter housed in a rugged IP65 enclosure. It combines simple and safe wiring, commissioning and installation with the YOKOGAWA EXA microprocessor analyzer family's advanced functionality. The DO202 is a SMART transmitter and it is this function which enables the transmission of diagnostic data, remote configuration of the analyzer, information stored in the logbook and up to four process variables. Either HART protocol which has been superimposed on the 4-20 mA current or Fieldbus digital communication known as Fieldbus Foundation can conduct digital communication.
PH measurement probe / ozone / chlorine - JUMO tecLine ClO2
The JUMO tecLine Cl2, Sensor for Free Chlorine (202630) is a membrane covered amperometric sensor that is used in the measurement of the concentration of free chlorine used in bath water, drinking water, cooling water, industrial water and processed water. The sensor used for...
PH measurement probe / ozone / chlorine - JUMO tecLine ClO2
The JUMO tecLine Cl2, Sensor for Free Chlorine (202630) is a membrane covered amperometric sensor that is used in the measurement of the concentration of free chlorine used in bath water, drinking water, cooling water, industrial water and processed water. The sensor used for free chlorine water is usable for measuring the anorganic chlorination in the following agents- sodium hypochlorite (NaOCl, chlorine bleaching solution), chlorine gas (Cl2), electrolytically generated chlorine, calcium hypochlorite (Ca(OCl)2), or chlorinated lime (Ca(OCl)Cl).
Sensors will not be able to check for the absence of free chlorine. The sensors feature integrated electronics that provides temperature compensated currents signal that ranges from 4 to 20 mA. Calibration takes place through the downstream device ( controller, indicator, recorder PLC, etc.) Sensors are connectable directly to suitable control and display device. The Display/control device JUMO dTRANS AS 02 data sheet 202553 as well as the JUMO AQUIS 500 AS (data sheet 202568) are perfect for the combination of such sensors.
Sensors will not be able to check for the absence of free chlorine. The sensors feature integrated electronics that provides temperature compensated currents signal that ranges from 4 to 20 mA. Calibration takes place through the downstream device ( controller, indicator, recorder PLC, etc.) Sensors are connectable directly to suitable control and display device. The Display/control device JUMO dTRANS AS 02 data sheet 202553 as well as the JUMO AQUIS 500 AS (data sheet 202568) are perfect for the combination of such sensors.
PH/ORP transmitter - JUMO ecoTRANS pH 03
JUMO ecoTRANS pH 03 - transmitter serves as a control device for pH values, as well as for analysis of Redox tension in various types of aqueous solutions. It is mostly used for water management,...
PH/ORP transmitter - JUMO ecoTRANS pH 03
JUMO ecoTRANS pH 03 - transmitter serves as a control device for pH values, as well as for analysis of Redox tension in various types of aqueous solutions. It is mostly used for water management, either drinking water, waste water or sea water, pool water etc. It contains two inputs, where one connects single-rod electrodes with a separate reference electrode, whereas RTD temperature probes Pt 100 or Pt 1000 can be connected to the second analog input. In addition it can be used with Antimon electrodes and features a maximum of two analog outputs and a single relay change-over contact. Also, it provides monitoring for medium temperature. The device is safe, as input, output and power supply are completely isolated from one another.
Conductivity controller - 8860 series
The Signet 8860 Dual Channel Conductivity/Resistivity Controller is a device with a two-channel input design. It is composed of three scaleable 4 to 20 mA outputs and four programmable relays. It produces great output...
Conductivity controller - 8860 series
The Signet 8860 Dual Channel Conductivity/Resistivity Controller is a device with a two-channel input design. It is composed of three scaleable 4 to 20 mA outputs and four programmable relays. It produces great output versatility by utilizing two open collector outputs instead of two of the relays. Combining dual input and advanced control capability, percent rejection, difference and ratio calculations, and use of Signet Conductivity Sensors, perfect measurement and control system for water treatment applications can be achieved. This is available in two versions: one is used for AC line-voltage, while the other is for a low voltage DC. It is a very user-friendly device having a four-button keypad arrangement designed with intuitive software. Panel installation is made easy with the NEMA 4X/IP65 front panel with its self-healing window in a 1/4 DIN package.
PH multi-parameter transmitter / for water analysis - max. 5 ppm, 4 - 20 mA | 8630 series
The 3-8630-3P ProcessPro Chlorine Transmitter is a top of the line product designed by Signet. It features a standard 4 button keypad that allows easy programming....
PH multi-parameter transmitter / for water analysis - max. 5 ppm, 4 - 20 mA | 8630 series
The 3-8630-3P ProcessPro Chlorine Transmitter is a top of the line product designed by Signet. It features a standard 4 button keypad that allows easy programming. it also has an optional menu that enables the calculation of free chlorine level or select Manual pH input and enter the applications stable pH level to determine free chlorine levels. It is also equipped with two dry-contact mechanical relays that can be used to deliver an alarm signal or activate a chlorine dosing system. It is built with 4 to 20 mA outputs which can transmit chlorine, pH or temperature information to a data collection device.