+7 (812) 645-08-06
Air quality monitoring devices
select brand
Air quality meter IAQ / indoor - 0 - 5 000 ppm | HD 21AB /HD 21AB17
The HD 21AB and HD 21AB17 are indoor air quality meters, developed by Delta Ohm. Their memory systems can store up to 67,600 recordings, divided in 64...
Air quality meter IAQ / indoor - 0 - 5 000 ppm | HD 21AB /HD 21AB17
The HD 21AB and HD 21AB17 are indoor air quality meters, developed by Delta Ohm. Their memory systems can store up to 67,600 recordings, divided in 64 blocks. They use the software DeltaLog10 version 0.1.5.3..
The meters follow ASHRAE 62.1 – 2004 with Legislative Decree 81/2008 standards, in working in areas with space limitations that are used by people. These areas include the kitchen, bathroom, changing area, and swimming pool because they are highly humid. The meters are also equipped with large Dot Matrix graphical displays, with resolution rates of 160 x 160 dots.
The meters follow ASHRAE 62.1 – 2004 with Legislative Decree 81/2008 standards, in working in areas with space limitations that are used by people. These areas include the kitchen, bathroom, changing area, and swimming pool because they are highly humid. The meters are also equipped with large Dot Matrix graphical displays, with resolution rates of 160 x 160 dots.
Air quality meter IAQ / indoor - 0 - 5 000 ppm | HD 37AB1347
The HD37AB1347 IAQ Monitor is a tool developed by Delta Ohm for air quality analysis (Indoor Air Quality, IAQ). Parameters such as, but not limited to, carbon dioxide, carbon monoxide, temperature, absolute...
Air quality meter IAQ / indoor - 0 - 5 000 ppm | HD 37AB1347
The HD37AB1347 IAQ Monitor is a tool developed by Delta Ohm for air quality analysis (Indoor Air Quality, IAQ). Parameters such as, but not limited to, carbon dioxide, carbon monoxide, temperature, absolute humidity, mixing ratio, enthalpy, and atmospheric pressure can be measured simultaneously by the instrument through a P37AB147 SICRAM probe.
The probe, however, does not measure carbon monoxide. The ventilation rate and the percentage of injection of outdoor air for both carbon dioxide and temperature can also be calculated by the instrument. A large, dot matrix display with a resolution of 160x160 points is also built into the monitor. It is suitable for use in the analysis and study of sick building syndrome, verification of the HVAC system, and audits in building automation, among others.
The probe, however, does not measure carbon monoxide. The ventilation rate and the percentage of injection of outdoor air for both carbon dioxide and temperature can also be calculated by the instrument. A large, dot matrix display with a resolution of 160x160 points is also built into the monitor. It is suitable for use in the analysis and study of sick building syndrome, verification of the HVAC system, and audits in building automation, among others.
CEMS monitoring system / emissions / continuous - CEM O2
The hot-wet extractive systems need Continuous Emissions Monitoring systems. They take the flue gas sample from the output of the wet-scrubbers. The users are allowed to take a hot-wet oxygen measurement from the incoming feed line to the CEM system analysis cabinet. The oxygen analyzer...
CEMS monitoring system / emissions / continuous - CEM O2
The hot-wet extractive systems need Continuous Emissions Monitoring systems. They take the flue gas sample from the output of the wet-scrubbers. The users are allowed to take a hot-wet oxygen measurement from the incoming feed line to the CEM system analysis cabinet. The oxygen analyzer that is used for this measurement should be equipped in such a way that it keeps the sample gas above the dew point and compacts it in such a way that it fit within the restricted space of the analysis cabinet.
The CEM/O2 sensor was designed in such a way that it fulfills the replacement as well as integration needs of hot-wet extractive CEM systems integrators. For continuous sampling, the sample inlet feeds a straight-run sample line along with center mounted chimney-effect convection stack. The sensor housing is so compact that it fits easily into CEM cabinet. The CEM/O2 analyzer comes with two control options. The IQ Series Transmitter provides the sensor head with full function electronics with analog outputs, an auto calibration feature, RS485, expanded system diagnostics, and optional Hart communication.
The CEM/O2 sensor was designed in such a way that it fulfills the replacement as well as integration needs of hot-wet extractive CEM systems integrators. For continuous sampling, the sample inlet feeds a straight-run sample line along with center mounted chimney-effect convection stack. The sensor housing is so compact that it fits easily into CEM cabinet. The CEM/O2 analyzer comes with two control options. The IQ Series Transmitter provides the sensor head with full function electronics with analog outputs, an auto calibration feature, RS485, expanded system diagnostics, and optional Hart communication.
CEMS monitoring system / emissions / continuous - 914
Consistent Reporting & monitoring of the pollutants from the flue stacks released in the atmosphere is necessary according to various Environmental compliance regulations like EPA, initiated by the Government Agencies....
CEMS monitoring system / emissions / continuous - 914
Consistent Reporting & monitoring of the pollutants from the flue stacks released in the atmosphere is necessary according to various Environmental compliance regulations like EPA, initiated by the Government Agencies. Hence , reliable and accurate turn key constant emission monitoring systems are required for accurate and reliable analysis.
Western Research TM Model 914 can be the best solution for this problem. It consists of a Continuous Emission Monitor(CEM). The CEM includes all necessary components to facilitate reporting and compliance monitoring. All types of compliance monitoring can be met because it uses dry extractive sampling techniques. Sample extraction system consists of heated sampling line and controlled temperature conditioning unit. Reliability in integrity of the sample gas is maintained by the heating sampling line.
Western Research TM Model 914 can be the best solution for this problem. It consists of a Continuous Emission Monitor(CEM). The CEM includes all necessary components to facilitate reporting and compliance monitoring. All types of compliance monitoring can be met because it uses dry extractive sampling techniques. Sample extraction system consists of heated sampling line and controlled temperature conditioning unit. Reliability in integrity of the sample gas is maintained by the heating sampling line.
Dust emissions monitoring device - 0 - 999 mg/m³ | 4200
The Model 4200 is manufactured by Ametek, and used in measuring dust emission concentrations on industrial processes and non-compliance applications. It is suited for multiprocess plants with common exhaust stacks,...
Dust emissions monitoring device - 0 - 999 mg/m³ | 4200
The Model 4200 is manufactured by Ametek, and used in measuring dust emission concentrations on industrial processes and non-compliance applications. It is suited for multiprocess plants with common exhaust stacks, and is easy to operate and requires low maintenance. The product is has direct continuous dust concentration measurement, and is small, lightweight, and compact. It is applicable to use for particulate removal system baghouses, and other efficiency monitoring, combustion efficiency monitoring, and evaluation of control processes.
The Model 4200 is applicable for the following industries, such as in power utilities, refineries, chemical and petrochemical industries. It can also be utilized for cement plants, incinerators, roadstone plants, process industries, quarries, and in road tunnels.
The Model 4200 is applicable for the following industries, such as in power utilities, refineries, chemical and petrochemical industries. It can also be utilized for cement plants, incinerators, roadstone plants, process industries, quarries, and in road tunnels.
Monitoring device / dust concentration and opacity - 0 - 10 000 mg/m³ | 4500 MkIII
The 4500 MkIII Series is a dust emissions monitor developed by Ametek Process Instruments. It is developed with compliance to ASTM Standard...
Monitoring device / dust concentration and opacity - 0 - 10 000 mg/m³ | 4500 MkIII
The 4500 MkIII Series is a dust emissions monitor developed by Ametek Process Instruments. It is developed with compliance to ASTM Standard B 62161 directive requirements. The system is supplied with flood LED, LED light source, retro-reflector, dual function menus, easy to read display, adapter flanges, and built in audit jig. Its key features include single hand operation, simple installation, local keypad, local display, and air purging accessories. In addition, this unit is supplied with an opacity of 0 to 20 % up to 0 to 100 %.
CEMS monitoring system / emissions / continuous - max. 5 - 95 %RH | 914
The The Western ResearchTM Model 914 is a built-to-order Continuous Emission Monitor (CEM) that has attained all the necessary components essential for the compliance monitoring and reporting project. This system...
CEMS monitoring system / emissions / continuous - max. 5 - 95 %RH | 914
The The Western ResearchTM Model 914 is a built-to-order Continuous Emission Monitor (CEM) that has attained all the necessary components essential for the compliance monitoring and reporting project. This system utilizes dry extract sampling methods which is specifically designed to be aligned with government regulations for all types of compliance monitoring.
Its sample extraction system makes a combination of a temperature-controlled sample conditioning and a heated sampling line in order to assure the integrity of the sample gas. This instrument is designed with a free-standing 19-inch open rack. Furthermore, this is also consists of an enclosed rack, a free-standing enclosure or walk-in shelter used for environmental reasons. It also has a computer data acquisition and control functions for specific reporting.
Its sample extraction system makes a combination of a temperature-controlled sample conditioning and a heated sampling line in order to assure the integrity of the sample gas. This instrument is designed with a free-standing 19-inch open rack. Furthermore, this is also consists of an enclosed rack, a free-standing enclosure or walk-in shelter used for environmental reasons. It also has a computer data acquisition and control functions for specific reporting.
Emissions monitoring device / continuous - 125 - 2 500 ppm | 920
Numerous governmental air pollution restrictions limit the allowable stack dump from industrial establishments. This often leads to the facility to analyze and report the concentrations of multiple contaminants being dumped. For precise monitoring...
Emissions monitoring device / continuous - 125 - 2 500 ppm | 920
Numerous governmental air pollution restrictions limit the allowable stack dump from industrial establishments. This often leads to the facility to analyze and report the concentrations of multiple contaminants being dumped. For precise monitoring of these pollutants, an analyzer must be accurate and reliable in measurement of the various impurities of interest, which is extremely difficult as the stack gas is genuinely hot, saturated with moisture, and unhygienic. For this issue, the AMETEK Western Research Model 920 serves as a solution, as it is exclusively regulated for overseeing of the stack dump of multiple pollutants varying with concentration. It measures up to five pollutants at stack conditions, and with incorporation of an optional zirconium oxide sensor, monitoring of oxygen concentration is possible. The 920 edition is a rugged and dependable analyzer, as its UV-based analysis does not get affected by H2O and CO2 interference.
Monitoring device / dust concentration and opacity - 0 - 10 000 µg/m³ | MP101M
The ambient air-suspended particulate analyzer MP101M has an option for real time measurement option (CPM). When used with CPM module's optical technology that is patented , the beta gauge measurement method...
Monitoring device / dust concentration and opacity - 0 - 10 000 µg/m³ | MP101M
The ambient air-suspended particulate analyzer MP101M has an option for real time measurement option (CPM). When used with CPM module's optical technology that is patented , the beta gauge measurement method...
Environmental gas analyzer - 0 - 1 000 | MMS
The Multi-parameter micro monitoring station is a type of an air-monitoring device that can analyze 4 kinds of gases including CO, CO2, NOx,...
Environmental gas analyzer - 0 - 1 000 | MMS
The Multi-parameter micro monitoring station is a type of an air-monitoring device that can analyze 4 kinds of gases including CO, CO2, NOx, O3 and an optional particulate sampler PM162M that is suitable in small-footprint housing. It has the ability to be easily completed with MP101M or CPA analyzers for complementary real-time fine dust (PM1, PM10, PM2.5) measurements.
It can be utilized in a variety of applications including the monitoring of air quality in urban, roadside, and indoors areas (risk assessment in work places).
It can be utilized in a variety of applications including the monitoring of air quality in urban, roadside, and indoors areas (risk assessment in work places).
CEMS monitoring system / emissions / continuous - AMESA-dioxine
The AMESA utilises the modified cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs).
Isokinetic sampling by...
Isokinetic sampling by...
CEMS monitoring system / emissions / continuous - AMESA-dioxine
The AMESA utilises the modified cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs).
Isokinetic sampling by...
Isokinetic sampling by...
Emissions monitoring system / CEMS / continuous - MVS 2M
The MVS 2M is a multi-channel CEMS management system. It is specifically manufactured...
Emissions monitoring system / CEMS / continuous - MVS 2M
The MVS 2M is a multi-channel CEMS management system. It is specifically manufactured to allocate 2, 3, or 4 fluid channels to an analysis chamber which is the Stand-by Measurements Group (GMS). The GMS comprises one or various analyzers that serve as substitute if the Duty Measurement Group (GMT) is not available.
Dust emissions monitoring device - 2 - 4 000 mg/m³, 4 - 40 m/s | BETA 5M
The BETA 5M, manufactured by Environnement, is a continuous stack particulate monitor...
Dust emissions monitoring device - 2 - 4 000 mg/m³, 4 - 40 m/s | BETA 5M
The BETA 5M, manufactured by Environnement, is a continuous stack particulate monitor...