+7 (812) 645-08-06
Heat pumps
select brand
Heat pump - 2 - 5 t | UQ Latitude R410A
Three footprints to optimize performance and keep these units compact and easy to install.
Pre-painted galvanized steel protects against corrosion and resists fading.
Internally protected compressor to protect against high pressure...
Pre-painted galvanized steel protects against corrosion and resists fading.
Internally protected compressor to protect against high pressure...
Heat pump - 2 - 5 t | UQ Latitude R410A
Three footprints to optimize performance and keep these units compact and easy to install.
Pre-painted galvanized steel protects against corrosion and resists fading.
Internally protected compressor to protect against high pressure and high temperature.
Factory-installed liquid line filter drier to keep the refrigerant system moisture free.
Operates over a wide range of design conditions with a constant torque fan motor and 5 speed taps to provide greater on site flexibility to match comfort requirements.
Complete line of field-installed accessories including electric resistance strip heaters, hard start kits, thermostats and more.
Grooved copper tubes and enhanced aluminum fin construction improves heat transfer for maximum efficiency and durability.
Long life, permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance, adding greater reliability to the unit.
Pre-painted galvanized steel protects against corrosion and resists fading.
Internally protected compressor to protect against high pressure and high temperature.
Factory-installed liquid line filter drier to keep the refrigerant system moisture free.
Operates over a wide range of design conditions with a constant torque fan motor and 5 speed taps to provide greater on site flexibility to match comfort requirements.
Complete line of field-installed accessories including electric resistance strip heaters, hard start kits, thermostats and more.
Grooved copper tubes and enhanced aluminum fin construction improves heat transfer for maximum efficiency and durability.
Long life, permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance, adding greater reliability to the unit.
Heat pump - 2 - 5 t | DHQ Affinity Dual Fuel
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired,charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is...
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired,charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is...
Heat pump - 2 - 5 t | DHQ Affinity Dual Fuel
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired,charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fitand a tight seal.
Durable finish made of powder-painted, galvanized steel meets 500-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Units are engineered and built to be among the quietest models.
Compressor is internally protected against high pressure and temperature.
Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Secured service access ports are protected, externally mounted and reusable on both high and low lines.
Easy service access via a large single panel covering the electrical and gas controls.
Environmentally friendly R-410A refrigerant.
Painted, louvered coil guards standard on DHQ024-060.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired,charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fitand a tight seal.
Durable finish made of powder-painted, galvanized steel meets 500-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Units are engineered and built to be among the quietest models.
Compressor is internally protected against high pressure and temperature.
Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Secured service access ports are protected, externally mounted and reusable on both high and low lines.
Easy service access via a large single panel covering the electrical and gas controls.
Environmentally friendly R-410A refrigerant.
Painted, louvered coil guards standard on DHQ024-060.
Heat pump - 2 - 5 t | BHZ Affinity R410A
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means...
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means...
Heat pump - 2 - 5 t | BHZ Affinity R410A
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fit and a tight seal.
Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Units are engineered and built to be among the quietest models.
Compressor is internally protected against high pressure and temperature.
Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Secured service access ports are protected, externally mounted and reusable on both high and low lines.
Easy service access via a large single panel covering the electrical and gas controls.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fit and a tight seal.
Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Units are engineered and built to be among the quietest models.
Compressor is internally protected against high pressure and temperature.
Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Secured service access ports are protected, externally mounted and reusable on both high and low lines.
Easy service access via a large single panel covering the electrical and gas controls.
Heat pump - 2 - 5 t | BHQ Affinity R410A
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric...
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric...
Heat pump - 2 - 5 t | BHQ Affinity R410A
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fit and a tight seal.
Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fit and a tight seal.
Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Heat pump - 2 - 5 t | BHX Affinity R410A
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric...
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric...
Heat pump - 2 - 5 t | BHX Affinity R410A
All model sizes share a common compact cabinet in a single footprint for on-site flexibility.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fit and a tight seal.
Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, charged with R-410A and tested prior to shipment.
Electric utility knockouts are provided on unit side and bottom for easy connections.
Convertible airflow design means no panel cutting is required and no accessory panel is necessary.
Condensate pan is non-corrosive, long-lasting and watertight.
Condensate drain is heavy-duty. A one-inch NPT copper connection is rigidly mounted for proper fit and a tight seal.
Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
Top discharge allows warm air to be blown up away from the structure and landscaping.
Multi-pieces totally enclosed for maximum protection.
Air/water heat pump - 5.8 - 40.2 kW | C1 series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC...
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC...
Air/water heat pump - 5.8 - 40.2 kW | C1 series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL type, complete with thermal protection.
Antivibration mountings and oil charge are standard.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
INTEGRATED solution: NOFROST type: copper tubes in a plastic pipe
fitted into a steel tank with shell covered with closed-cell neoprene
anti-condensate material; complete with water differential pressure
switch. BASE solution: plate-type made of AISI 316 steel complete
with water differential pressure switch. Shell covered with closedcell
neoprene anti-condensate material.
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL type, complete with thermal protection.
Antivibration mountings and oil charge are standard.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
INTEGRATED solution: NOFROST type: copper tubes in a plastic pipe
fitted into a steel tank with shell covered with closed-cell neoprene
anti-condensate material; complete with water differential pressure
switch. BASE solution: plate-type made of AISI 316 steel complete
with water differential pressure switch. Shell covered with closedcell
neoprene anti-condensate material.
Air/water heat pump - 38.3 - 208 kW | C2 series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL...
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL...
Air/water heat pump - 38.3 - 208 kW | C2 series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL type, complete with thermal protection.
Antivibration mountings and oil charge are standard.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
INTEGRATED solution: NOFROST type (not for 70C2 and 80C2 models):
copper tubes in a plastic pipe fitted into a steel tank with
shell covered with closed-cell neoprene anti-condensate material;
complete with water differential pressure switch. BASE solution:
plate-type made of AISI 316 steel complete with water differential
pressure switch. Shell covered with closed-cell neoprene anti-condensate
material.
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL type, complete with thermal protection.
Antivibration mountings and oil charge are standard.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
INTEGRATED solution: NOFROST type (not for 70C2 and 80C2 models):
copper tubes in a plastic pipe fitted into a steel tank with
shell covered with closed-cell neoprene anti-condensate material;
complete with water differential pressure switch. BASE solution:
plate-type made of AISI 316 steel complete with water differential
pressure switch. Shell covered with closed-cell neoprene anti-condensate
material.
Air/water heat pump - 157 - 410 kW | C4 series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level...
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level...
Air/water heat pump - 157 - 410 kW | C4 series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL type, complete with thermal protection.
Antivibration mountings and oil charge are standard.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
Plate-type made of AISI 316 steel complete with water differential
pressure switch. Shell covered with closed-cell neoprene anti-condensate
material.
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
HERMETIC SCROLL type, complete with thermal protection.
Antivibration mountings and oil charge are standard.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
Plate-type made of AISI 316 steel complete with water differential
pressure switch. Shell covered with closed-cell neoprene anti-condensate
material.
Air/water heat pump - 42 - 126 kW | S series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the...
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the...
Air/water heat pump - 42 - 126 kW | S series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
Reciprocating SEMIHERMETIC type, fixed on vibration isolation
mountings; complete with oil pump, crankcase electrical heater,
electronic protection, intercepting valves on suction and discharge
(mod. 015-20 HP); flexible joints on suction and discharge.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
Reciprocating SEMIHERMETIC type, fixed on vibration isolation
mountings; complete with oil pump, crankcase electrical heater,
electronic protection, intercepting valves on suction and discharge
(mod. 015-20 HP); flexible joints on suction and discharge.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Air/water heat pump - 140 - 370 kW | S series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories...
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories...
Air/water heat pump - 140 - 370 kW | S series
Housing
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
Reciprocating SEMIHERMETIC type, fixed on vibration isolation
mountings; complete with oil pump, crankcase electrical heater,
electronic protection, intercepting valves on suction and discharge
(mod. 015-20 HP); flexible joints on suction and discharge.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
Shell and tube type, thermally insulated by vapour-proof closed cell.
Base made of painted galvanised steel; panels made of galvanised
steel externally coated with plastic (PVC) film and mounted on aluminium
profiles to ensure total weathering resistance. Panels are
internally lined to reduce the noise level (LN Accessories only).
Compressor
Reciprocating SEMIHERMETIC type, fixed on vibration isolation
mountings; complete with oil pump, crankcase electrical heater,
electronic protection, intercepting valves on suction and discharge
(mod. 015-20 HP); flexible joints on suction and discharge.
Fan
Low speed, axial-flow fans fitted with accident-prevention protective
grille; directly coupled motor with built-in thermal cutout and IP
54 protection degree; aerodynamic housing and wing profile blades
increase efficiency and decrease noise level.
Air heat exchanger
Finned coil made with copper pipes and aluminium fins offering a
high exchange surface area.
Water heat exchanger
Shell and tube type, thermally insulated by vapour-proof closed cell.
Heat pump - 6 - 36 kW | ARCOA R/O MT
R410A refrigerant. One-piece product, ready to install.
Complete hydraulic equipment pre-integrated....
Complete hydraulic equipment pre-integrated....
Heat pump - 6 - 36 kW | ARCOA R/O MT
R410A refrigerant. One-piece product, ready to install.
Complete hydraulic equipment pre-integrated....
Complete hydraulic equipment pre-integrated....