+7 (812) 645-08-06
Valve controllers
select brand
Valve controller for dosing
The PICO driver DCON design is a digital amplifier intended for usewith piezoelectric...
Valve controller for dosing
The PICO driver DCON design is a digital amplifier intended for usewith piezoelectric stacks that can be found in our valves. It is able to provide correct voltage as well as correct electrical loop for each type
of valve involved. It is equipped with heater control electronics for situations involving the use of heated valves.
of valve involved. It is equipped with heater control electronics for situations involving the use of heated valves.
Valve controller for dosing - PDA 1+1, PDA 2+2
The PDA 1+1 and 2+2 are process generators made to work with piezoelectric micrometering functions for use.
Valve controller for dosing - ValveMate™
The ValveMate™ Dispense Valve Controllers is an innovative...
Valve controller for dosing - ValveMate™
The ValveMate™ Dispense Valve Controllers is an innovative device that aids in push-button adjustment of valve as and when needed. This equipment helps in maximizing efficiency of automated assembly machine as per the convenience.
Spray valve controller - ValveMate™ 7094
ValveMate™ 7094 is control platform for auger valve 794 series. This controller...
Spray valve controller - ValveMate™ 7094
ValveMate™ 7094 is control platform for auger valve 794 series. This controller has a simple speed and time base control to operate the valve. It is made with exceptionally accurate dispensing performance. The fluids are delivered by servomotor-driven auger. The dispensed volume is determined by turning speed and auger pitch.
Spray valve controller - ValveMate™ 7060RA
ValveMate™ 7060RA is a radial system controller that is able to supply the...
Spray valve controller - ValveMate™ 7060RA
ValveMate™ 7060RA is a radial system controller that is able to supply the proper controls necessary for steady operation of the 782RA spray valve and 7860C-RS radial spinner system. It has a distinct microprocessor circuitry that ensures precise control of nozzle air, valve open time and drive motor control solenoid.
Valve controller for dosing - DSP501N
Featuring a larger internal air solenoid recommended for operations that require an immediate and fast reaction for de-pressurization....
Valve controller for dosing - DSP501N
Featuring a larger internal air solenoid recommended for operations that require an immediate and fast reaction for de-pressurization. Examples include: Collapsible toothpaste-type tube, caulking, cartridge reservoirs, valves and rotary-table operations. The higher volume exhaust prevents post compression of materials contained in tubes, avoiding stringing.
Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip. Timing interval from 0.01 to 31 seconds.
Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip. Timing interval from 0.01 to 31 seconds.
Valve controller for dosing - RVC900N
The RVC900N works for the PDV-1000 series of auger valves and the RV5000DPM cartridge auger valve.
It uses timed shots of 0.01 seconds at the least. The motor speed...
It uses timed shots of 0.01 seconds at the least. The motor speed...
Valve controller for dosing - RVC900N
The RVC900N works for the PDV-1000 series of auger valves and the RV5000DPM cartridge auger valve.
It uses timed shots of 0.01 seconds at the least. The motor speed is kept constant to ensure material viscosity rates are down. The unit features an adjustable forward and reverse speed and time unit to make it perfect for any dispensing cycle. The RVC900N uses material pressure to a barrel and a regulator and pressure gauge.
It has a digital timer that can function at up to 99.99 seconds and a reverse timer and speed control to keep suck-back levels under control. This is an accurate and repeatable unit that is perfect for many applications including automated functions.
It uses timed shots of 0.01 seconds at the least. The motor speed is kept constant to ensure material viscosity rates are down. The unit features an adjustable forward and reverse speed and time unit to make it perfect for any dispensing cycle. The RVC900N uses material pressure to a barrel and a regulator and pressure gauge.
It has a digital timer that can function at up to 99.99 seconds and a reverse timer and speed control to keep suck-back levels under control. This is an accurate and repeatable unit that is perfect for many applications including automated functions.
Valve controller for dosing - VC1195N
A 4-way valve controller, the VC1195N can be used in controlling up to two valves at the same time. To require or optionally accept the 4-way controller that is suited for all valves. A continuous...
Valve controller for dosing - VC1195N
A 4-way valve controller, the VC1195N can be used in controlling up to two valves at the same time. To require or optionally accept the 4-way controller that is suited for all valves. A continuous "valve-off"position is maintained until such time as the VC1195N valve controller receives the on signal. This type of instruction can be a derivative a foot switch or a robotic device. When the foot switch is depressed and the timer is off, the state of valve-on and it is the same when the robot is used to be in full control of the operation. In timer mode, a pulse for a moment will cause the activation of the open valve for a perioed that is programmed and then it will close the valve automatically. For any application, repeatable beads or dots will be delivered accurately.
Spray valve controller - SVC100
This remarkable SVC100 Spray Valve Controller is designed by FISNAR that is suitable for all SV series spray valves. It is ideally used for providing the adjustment...
Spray valve controller - SVC100
This remarkable SVC100 Spray Valve Controller is designed by FISNAR that is suitable for all SV series spray valves. It is ideally used for providing the adjustment controls that is necessary for a clean spray application. It has the capability to control the relationship (time) between the fluid start signal and the atomizing signal. This efficient features is critical in ensuring that the fluid air line pressure starts momentarily once the atomizing pressure opens. It also ensures the atomizing pressure stays on momentarily after the fluid cuts off and ensures adequate cleaning of the nozzle after the full spray cycle.
Proportional solenoid valve controller - 24 V | KC B10-11
The out of the ordinary KC/KWC series are highly specialized controllers highly...
Proportional solenoid valve controller - 24 V | KC B10-11
The out of the ordinary KC/KWC series are highly specialized controllers highly recommended of use in proportional valves. This highly efficient device has been created in two high quality types which are the KC series or single solenoid type and the KWC series otherwise know as the double solenoid type.
Proportional solenoid valve controller - 24 V | KWC B10-10
KC/KWC series are controllers for only...
Proportional solenoid valve controller - 24 V | KWC B10-10
KC/KWC series are controllers for only proportional valves. We have two types, KC series (single solenoid type) and KWC series (double solenoid type).
Solenoid valve controller - ZNS series
The state of the art ZNS is purposefully designed to be placed in middle...
Solenoid valve controller - ZNS series
The state of the art ZNS is purposefully designed to be placed in middle of the solenoid unloading valve as well as the sub-plate. As a result, it has the ability to suspend the unloading time through the simple use of an adjust screw which in turn greatly diminishes shock.