+7 (812) 645-08-06
Stepper motors
select brand
Stepper electric motor / integrated-drive - 0.9°, 24 VDC
The Stepping motors with internal drivers is from Sanyo Denki. Its compact, rigid design measures...
Stepper electric motor / integrated-drive - 0.9°, 24 VDC
The Stepping motors with internal drivers is from Sanyo Denki. Its compact, rigid design measures...
Two-phase stepper electric motor - 0.2 - 2.15 Nm | SH series
The stepping motors with internal drivers comes in 42 mm (NEMA17) & 60 mm (NEMA 23) with...
Two-phase stepper electric motor - 0.2 - 2.15 Nm | SH series
The stepping motors with internal drivers comes in 42 mm (NEMA17) & 60 mm (NEMA 23) with...
Stepper electric motor - 0.0056 - 19 Nm | H/SH/SS/SM series
Main Specifications :
Size : 14 mm square to 106 mm round (NEMA 42) - 10 frame...
Size : 14 mm square to 106 mm round (NEMA 42) - 10 frame...
Stepper electric motor - 0.0056 - 19 Nm | H/SH/SS/SM series
Main Specifications :
Size : 14 mm square to 106 mm round (NEMA 42) - 10 frame...
Size : 14 mm square to 106 mm round (NEMA 42) - 10 frame...
Stepper electric motor / waterproof - 1 - 9 Nm | SP series
The SP series, which are manufactured by Sanyo Denki, are 2-phase stepping...
Stepper electric motor / waterproof - 1 - 9 Nm | SP series
The SP series, which are manufactured by Sanyo Denki, are 2-phase stepping...
Three-phase stepper electric motor - 0.196 - 1.68 Nm | H series
The Sanyo Denki H series motor is designed to deliver high performance for a number...
Three-phase stepper electric motor - 0.196 - 1.68 Nm | H series
The Sanyo Denki H series motor is designed to deliver high performance for a number...
Stepper electric motor - 0.38 - 5 Nm | AS1xxx series
lStepper Motors represent synchronous motors with a high number of poles enabling them to be regarded as direct drives. The motors offer advantages including high holding torque and very good positioning capability. The intelligent control of the stator windings in...
Stepper electric motor - 0.38 - 5 Nm | AS1xxx series
lStepper Motors represent synchronous motors with a high number of poles enabling them to be regarded as direct drives. The motors offer advantages including high holding torque and very good positioning capability. The intelligent control of the stator windings in full step or microstep mode enables to directly approach (i.e. without return system) the individual steps or partial steps thus distinguishing between the Stepper Motors from servomotors and proving them as cost-effective alternative.
Stepper Motors with excessive acceleration and fast load cycles are no longer capable to follow the rotary field and “losing steps” and encoder option improves such situations. Stepper motor features maximum torque in the lower speed range and an overriding holding torque at standstill. But in many applications this process makes a holding brake unnecessary. The stepper motor terminals from the Beckhoff I/O system are suitable to can store current curves for any speed or load profile and for optimum adjustment
Stepper Motors with excessive acceleration and fast load cycles are no longer capable to follow the rotary field and “losing steps” and encoder option improves such situations. Stepper motor features maximum torque in the lower speed range and an overriding holding torque at standstill. But in many applications this process makes a holding brake unnecessary. The stepper motor terminals from the Beckhoff I/O system are suitable to can store current curves for any speed or load profile and for optimum adjustment
High-torque electric motor - 3 - 20 W | World K series
torque motors
Features
Winding application
High starting torque
Features
Winding application
High starting torque
Stepper electric motor / with integrated controller - 0.0036° - 0.72°, 0.3 - 110 Nm | AR AC FLEX series
The AR Series of High-Efficiency Closed Loops with Integrated Controllers from Orientalmotor is...
Stepper electric motor / with integrated controller - 0.0036° - 0.72°, 0.3 - 110 Nm | AR AC FLEX series
The AR Series of High-Efficiency Closed Loops with Integrated Controllers from Orientalmotor is a line of affordable, energy conserving devices ideal for those who wish to save without sacrificing quality. It accurately controls its position while monitoring the heat development, ensuring that it remains reduced. This stabilizes its performance for durability and reliability.
Five-phase stepper electric motor / with integrated controller - 0.00288° - 0.72°, 0.0231 - 8 Nm | CRK FLEX series
This 5-phase microstep motor with integrated controller works with a power supply of 24 Vdc. The standard...
Five-phase stepper electric motor / with integrated controller - 0.00288° - 0.72°, 0.0231 - 8 Nm | CRK FLEX series
This 5-phase microstep motor with integrated controller works with a power supply of 24 Vdc. The standard...
Five-phase stepper electric motor / DC - 0.00288° - 0.72°, 0.13 - 1.66 Nm | CRK series
The CRK series represents a range of 5-phase stepping motor and driver combinations....
Five-phase stepper electric motor / DC - 0.00288° - 0.72°, 0.13 - 1.66 Nm | CRK series
The CRK series represents a range of 5-phase stepping motor and driver combinations....
Stepper electric motor / high-torque - 1.8°, 0.014 - 4 Nm | PKP series
The High-Torque Stepper Motors 1.8°/0.9°/Geared (PKP) by Oriental Motor offers...
Stepper electric motor / high-torque - 1.8°, 0.014 - 4 Nm | PKP series
The High-Torque Stepper Motors 1.8°/0.9°/Geared (PKP) by Oriental Motor offers...
Stepper electric motor / high-torque - 1.8°, 20 - 85 mm | PKP series
The PKP Series of High-Torque 1.8° Stepper Motors from Orientalmotor are offered in 0.79-in. (20-mm), 1.10-in. (28-mm), 1.38-in....
Stepper electric motor / high-torque - 1.8°, 20 - 85 mm | PKP series
The PKP Series of High-Torque 1.8° Stepper Motors from Orientalmotor are offered in 0.79-in. (20-mm), 1.10-in. (28-mm), 1.38-in....
Stepper electric motor / high-resolution - 0.9°, 42 - 56.4 mm | PKP series
The PKP Series Stepper Motor is eqipped with 100 rotor teeth which is twice the...
Stepper electric motor / high-resolution - 0.9°, 42 - 56.4 mm | PKP series
The PKP Series Stepper Motor is eqipped with 100 rotor teeth which is twice the number of a standard type stepper motor that has only 50, but nonetheless delivers minimized vibration.
It is available in 1.65 in (42mm) and 2.22 in. (56.4 mm) frame sizes and various encoder selections are possible.
It is available in 1.65 in (42mm) and 2.22 in. (56.4 mm) frame sizes and various encoder selections are possible.
Stepper electric motor / high-torque - 0.72°, 20 - 85 mm | PK series
The 0.72° Stepping Motors comes with high-torque, standard or terminal...
Stepper electric motor / high-torque - 0.72°, 20 - 85 mm | PK series
The 0.72° Stepping Motors comes with high-torque, standard or terminal...
Stepper electric motor / high-resolution - 0.36°, 28 - 60 mm | PK series
The compact 0.36° Stepper Motor from ORIENTALMOTOR, offers services with speeds up to 1000 steps per...
Stepper electric motor / high-resolution - 0.36°, 28 - 60 mm | PK series
The compact 0.36° Stepper Motor from ORIENTALMOTOR, offers services with speeds up to 1000 steps per...
Stepper electric motor / closed loop - RS-232, 100 - 230 VAC | AS series
The AlphaStep with Built-in Controller is designed with the simplicity of a stepper motor with closed loop control and the added simplicity of a built-in controller. The AlphaStep with Built-in Controller utilizes a combination of Oriental Motor's closed...
Stepper electric motor / closed loop - RS-232, 100 - 230 VAC | AS series
The AlphaStep with Built-in Controller is designed with the simplicity of a stepper motor with closed loop control and the added simplicity of a built-in controller. The AlphaStep with Built-in Controller utilizes a combination of Oriental Motor's closed loop control and built-in feedback device to constant monitoring of he motor shaft position. The constant monitoring helps to detect and correct for loss of synchronism even during abrupt load fluctuations and accelerations.
The built-in controller driver is equipped with an integrated controller to ensure a simple, efficient solution and is computer-programmable via an RS-232C connection. The AlphaStep with Built-in Controller is made of frame sizes measuring from 1.65 in. (42mm) up to 3.54 in. (90mm) and comes with a wide range of gear options and electromagnetic brake. The driver is available in three power supply voltages of single-phase 100-115 VAC, single-phase 200-230 VAC and three-phase 200-230 VAC.
The built-in controller driver is equipped with an integrated controller to ensure a simple, efficient solution and is computer-programmable via an RS-232C connection. The AlphaStep with Built-in Controller is made of frame sizes measuring from 1.65 in. (42mm) up to 3.54 in. (90mm) and comes with a wide range of gear options and electromagnetic brake. The driver is available in three power supply voltages of single-phase 100-115 VAC, single-phase 200-230 VAC and three-phase 200-230 VAC.