+7 (812) 645-08-06
Spur gearmotors
select brand
DC electric gearmotor / spur - 12 mm, 0.3 - 1 W, 50:1 - 1 000:1 | BL12S20 series
The Spur Gear Motor of the BL12S20 Series functions with smooth and efficient operation. It is suitable...
DC electric gearmotor / spur - 12 mm, 0.3 - 1 W, 50:1 - 1 000:1 | BL12S20 series
The Spur Gear Motor of the BL12S20 Series functions with smooth and efficient operation. It is suitable for applications in electric locks, 3D printers, robots and RC airplanes. This gear motor is equipped with reduction gear trains that has the capacity to provide high force at a low shaft speed. The motors of the BL12S20 Series has a rated voltage of 2.4 V, 5 V, 12 V that can be customized.
DC electric gearmotor / spur - 16 mm, 0.36 - 1.2 W, 35:1 - 365:1 | BL16S05 series
This product is manufactured by Bling-elect....
DC electric gearmotor / spur - 16 mm, 0.36 - 1.2 W, 35:1 - 365:1 | BL16S05 series
This product is manufactured by Bling-elect. with a power of 0.36-1.2W and weights for about 24g. This model is applicable in paper feeders, electronic lock,security cameras, etc
DC electric gearmotor / spur - 25 mm, 0.2 - 3 W, 78:1 - 500:1 | BL25S37 series
The BL25S37 series , manufactured by BElect® , is a micro motor for...
DC electric gearmotor / spur - 25 mm, 0.2 - 3 W, 78:1 - 500:1 | BL25S37 series
The BL25S37 series , manufactured by BElect® , is a micro motor for...
DC electric gearmotor / spur - 33 mm, 0.88 - 8 W, 20:1 - 781:1 | BL33S38 series
Features:
Power range: 0.88-...
Power range: 0.88-...
DC electric gearmotor / spur - 33 mm, 0.88 - 8 W, 20:1 - 781:1 | BL33S38 series
Features:
Power range: 0.88- 8W and weighing at 0.12kg
Applications: automatic tissue dispenser, vending-machines.
Power range: 0.88- 8W and weighing at 0.12kg
Applications: automatic tissue dispenser, vending-machines.
Spur electric gearmotor
The ebm-papst ZEITLAUF has a standardized solution for small server and stepper motors users, the components which have gearheads for attachment to NEMA motors. The NEMA interface enables quick...
Spur electric gearmotor
The ebm-papst ZEITLAUF has a standardized solution for small server and stepper motors users, the components which have gearheads for attachment to NEMA motors. The NEMA interface enables quick...
Asynchronous electric gearmotor / spur - 1.5 Nm, 230 V, i = 1728000:1 | K15 series
K15 - A.C. asynchronous motors
G series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous...
G series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous...
Asynchronous electric gearmotor / spur - 1.5 Nm, 230 V, i = 1728000:1 | K15 series
K15 - A.C. asynchronous motors
G series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction treatment.
Drove by A.C. asynchronous motors, 230V-50Hz, (for other voltages, request information).
It runs in any position. Maximum output torque 1.5 Nm, steady load.
Possibilty to have both turning directions.
Assembling brake or speed control possibility.
Gearbox ratios from 6:1 to 1,728,000:1
G series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction treatment.
Drove by A.C. asynchronous motors, 230V-50Hz, (for other voltages, request information).
It runs in any position. Maximum output torque 1.5 Nm, steady load.
Possibilty to have both turning directions.
Assembling brake or speed control possibility.
Gearbox ratios from 6:1 to 1,728,000:1
DC electric gearmotor / spur - 12 - 24 V, 2 W, i = 7200:1 | K15 series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and...
DC electric gearmotor / spur - 12 - 24 V, 2 W, i = 7200:1 | K15 series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction treatment.
Drove by D.C. motor 28.41 type, at 12 or 24V, which allows an easy regulation by CMC 30-6 speed controller.
It runs in any position and in both turning directions. Maximum output torque 1.5 Nm, steady load.
Gearbox ratios from 10:1 to 7,200:1
For special requests, please, contact our commercial department.
Drove by D.C. motor 28.41 type, at 12 or 24V, which allows an easy regulation by CMC 30-6 speed controller.
It runs in any position and in both turning directions. Maximum output torque 1.5 Nm, steady load.
Gearbox ratios from 10:1 to 7,200:1
For special requests, please, contact our commercial department.
AC electric gearmotor / synchronous / spur - 230 V, 50 Hz, i = 1728000:1 | K15 series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction...
AC electric gearmotor / synchronous / spur - 230 V, 50 Hz, i = 1728000:1 | K15 series
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction treatment.
Drove by A.C. synchronous motors, 230V-50Hz.:
- M80 and M81 motors with single turning direction, to be indicated.
- M82 motor is bidirectional.
It runs in any position and both turning directions. Maximum output torque 1.5 Nm, steady load.
Gearbox ratios from 10:1 to 1,728,000:1
For special requests, please, contact our commercial department.
Drove by A.C. synchronous motors, 230V-50Hz.:
- M80 and M81 motors with single turning direction, to be indicated.
- M82 motor is bidirectional.
It runs in any position and both turning directions. Maximum output torque 1.5 Nm, steady load.
Gearbox ratios from 10:1 to 1,728,000:1
For special requests, please, contact our commercial department.
DC electric gearmotor / spur - 3 Nm, 12 - 24 VDC, i = 1400:1 | K30 series
K30 - D.C. motor 28.41 type
12 - 24Vdc
High endurance gearbox in Zamak die-casting housing, for heavy duty...
12 - 24Vdc
High endurance gearbox in Zamak die-casting housing, for heavy duty...
DC electric gearmotor / spur - 3 Nm, 12 - 24 VDC, i = 1400:1 | K30 series
K30 - D.C. motor 28.41 type
12 - 24Vdc
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction treatment.
Drove by D.C. motor 28.41 type, at 12 or 24V, which allows an easy regulation by CMC 30-6 speed controller.
It runs in any position and in both turning directions. Maximum output torque 3 Nm, steady load.
Gearbox ratios from 5.34:1 to 751.87:1
12 - 24Vdc
High endurance gearbox in Zamak die-casting housing, for heavy duty and continuous workload, with fully hobbed steel gear set and anti-friction treatment.
Drove by D.C. motor 28.41 type, at 12 or 24V, which allows an easy regulation by CMC 30-6 speed controller.
It runs in any position and in both turning directions. Maximum output torque 3 Nm, steady load.
Gearbox ratios from 5.34:1 to 751.87:1