+7 (812) 645-08-06
Needle bearings
select brand
Drawn cup needle roller bearing - HK series
The needle roller bearings guarantee a good load carrying capacity, in addition to their low cross-section and hardness....
Drawn cup needle roller bearing - HK series
The needle roller bearings guarantee a good load carrying capacity, in addition to their low cross-section and hardness. These units are specifically useful in arranging bearings, particularly when radial space is restricted.
The units can handle just pure radial load, and can not restrict the axial displacement of shaft relative to the housing. It is necessary to assure that inner ring axis and outer ring axis are aligned when mounted to the bearings.
The units can handle just pure radial load, and can not restrict the axial displacement of shaft relative to the housing. It is necessary to assure that inner ring axis and outer ring axis are aligned when mounted to the bearings.
Needle bearing / radial - K series
These needle roller bearings are ideal in arrangements with small radial space. They can handle...
Needle bearing / radial - K series
These needle roller bearings are ideal in arrangements with small radial space. They can handle only radial loads due to the axial shaft displacement. They have a high load capacity and low cross-section. It is also designed with a solid structure. When installing the bearings, it is essential to make sure that the inner ring axis and the outer ring axis are properly aligned.
Needle bearing / for aeronautics - MS21438, MS21349 series
The MS21438 and MS21349 series are ranges of type ATF and ATL aeronautical needle roller bearing from RBC Bearings. They are comprised of an inner ring, needle rollers, retaining washers, and...
Needle bearing / for aeronautics - MS21438, MS21349 series
The MS21438 and MS21349 series are ranges of type ATF and ATL aeronautical needle roller bearing from RBC Bearings. They are comprised of an inner ring, needle rollers, retaining washers, and seal or thrust washers. They also have thick outer rings which are capable of enduring heavy loads and end washers mounted to the inner ring.
The seals and bearings are located in the counterbore of the outer ring and seal against the OD of the end washers. This delivers proper retention of lubricant and prevention of penetration of foreign material. These bearings have seal/thrust washers that are made of resin material which self-lubricates and functions to separate the steel thrust surfaces to prolong the life of the lubricant and bearing.
The seals and bearings are located in the counterbore of the outer ring and seal against the OD of the end washers. This delivers proper retention of lubricant and prevention of penetration of foreign material. These bearings have seal/thrust washers that are made of resin material which self-lubricates and functions to separate the steel thrust surfaces to prolong the life of the lubricant and bearing.
Needle bearing / for aeronautics - MS24456, MS24466 series
The MS24456 and MS24466 series are manufactured by RBC Bearings, and are aeronautical needle roller bearing, which has end washers...
Needle bearing / for aeronautics - MS24456, MS24466 series
The MS24456 and MS24466 series are manufactured by RBC Bearings, and are aeronautical needle roller bearing, which has end washers that are fastened to the inner ring. The NBF type has only one row of rollers and the NBL type has two rows of rollers.
There are lubrication grooves and holes that are offered for re-lubrication in the internal ring. They are utilized for protection from corrosion through the massive rolling loads, the OD of the bearing is made up of chromed plated.
There are lubrication grooves and holes that are offered for re-lubrication in the internal ring. They are utilized for protection from corrosion through the massive rolling loads, the OD of the bearing is made up of chromed plated.
Needle bearing / for aeronautics - MS24461 series
The Airframe Control Needle Roller Bearings are non-separable units which are composed of an inner ring, an outer ring, needle rollers, as well...
Needle bearing / for aeronautics - MS24461 series
The Airframe Control Needle Roller Bearings are non-separable units which are composed of an inner ring, an outer ring, needle rollers, as well as retaining washers which are connected to the inner ring. Grooves and hole for relubrication are put in the inner and outer ring. External surfaces, excluding the inner ring bore, are plated with cadmium.
The bearings are constructed to have low radial clearance when mounted to reduce vibration and backlash. The ultimate load ratings of the devices are not less than 1.5 times the limit load ratings.
The bearings are constructed to have low radial clearance when mounted to reduce vibration and backlash. The ultimate load ratings of the devices are not less than 1.5 times the limit load ratings.
Needle bearing / for aeronautics - MS24463, MS24464 series
The non-separable, self-aligning unit is built of an inner ring, needle rollers, outer ring with spherical O.D. retaining washers and housing ring with spherical I.D. The end washers are...
Needle bearing / for aeronautics - MS24463, MS24464 series
The non-separable, self-aligning unit is built of an inner ring, needle rollers, outer ring with spherical O.D. retaining washers and housing ring with spherical I.D. The end washers are fastened to the inner ring. Type NBE includes single row of rollers while type NBK includes two rows of rollers. Type NBK bearing features lubrication grooves and holes in the inner ring, outer ring and housing ring. The type NBE bearing also features similar design except groove and holes in the inner ring are omitted. The self-aligning bearing outer ring and its housing ring are a matched assembly and needs to be kept together. The complete external surface except the inner ring bore, are cadmium or zinc-nickel plated.
Needle bearing / for aeronautics - MS24662 series
The MS24662 series is a non-separable airframe control needle track roller that consists of a DC-type needle bearing, an internal...
Needle bearing / for aeronautics - MS24662 series
The MS24662 series is a non-separable airframe control needle track roller that consists of a DC-type needle bearing, an internal race, and retaining washers. The inner bearings of most bearings excluding the three, four ,and five features lubrication grooves and holes for re-lubrication purposes.
The exposed surfaces of the MS24662 series are cadmium-plated to comply with military requirements. The DC needle bearing can be supplied with an oil hole in its external shell.
The exposed surfaces of the MS24662 series are cadmium-plated to comply with military requirements. The DC needle bearing can be supplied with an oil hole in its external shell.
Needle bearing / combined - HYZF
The HYZF series is manufactured by Lycz Bearing, and is a super-precision angular-contact ball bearing for heavy loads which has a low-friction and high accuracy for very high speeds. It also has a high axial and...
Needle bearing / combined - HYZF
The HYZF series is manufactured by Lycz Bearing, and is a super-precision angular-contact ball bearing for heavy loads which has a low-friction and high accuracy for very high speeds. It also has a high axial and...