+7 (812) 645-08-06
Micro-positioning stages
select brand
Micropositioner
Ealing offers three different ranges of Manual Micropositioners - MicroMech™, MiniMech™ and MacroMech™. The selection of the most appropriate range is determined...
Micropositioner
Ealing offers three different ranges of Manual Micropositioners - MicroMech™, MiniMech™ and MacroMech™. The selection of the most appropriate range is determined by the following key criteria. Range of Travel Linear Stages provide a wide choice of travel from 6.5 mm with micrometer-driven MicroMech Stages to 50 mm with micrometerdriven MacroMech Stages.
Rotary Stages offer a full 360 degree coarse travel range and a minimum of 5 degrees fine calibrated adjustment. Tilting Stages provide either single or two-axis tilt up to a range of 10 degrees, depending on unit size. Tilt and Rotation Stages combine two
axes of tilt with an axis of rotation over a 5 degree range.
Rotary Stages offer a full 360 degree coarse travel range and a minimum of 5 degrees fine calibrated adjustment. Tilting Stages provide either single or two-axis tilt up to a range of 10 degrees, depending on unit size. Tilt and Rotation Stages combine two
axes of tilt with an axis of rotation over a 5 degree range.
Motorized micropositioner
Ealing offers a variety of Motorized Micropositioning systems for precise remote positioning, which includes...
Motorized micropositioner
Ealing offers a variety of Motorized Micropositioning systems for precise remote positioning, which includes LabMotion™, MotorDriver™, and EncoderDriver™ systems.
Micrometers on existing manual micropositioning stages can be replaced with either a MotorDriver actuator or an EncoderDriver actuator, providing motorized sub-micrometer control of the stage at an inexpensive price.
Micrometers on existing manual micropositioning stages can be replaced with either a MotorDriver actuator or an EncoderDriver actuator, providing motorized sub-micrometer control of the stage at an inexpensive price.
High-accuracy micro-positioning table - max. 2 m/s | Speed 2000 series
Advantages of ERO-MRT
High torsional stiffness respectively...
High torsional stiffness respectively...
High-accuracy micro-positioning table - max. 2 m/s | Speed 2000 series
Advantages of ERO-MRT
High torsional stiffness respectively flexural resistance
Extreme instantaneous charging
Longevity
Fully enclosed way of construction
Patented deviation and toothed belt tension
Sort processing times
High torsional stiffness respectively flexural resistance
Extreme instantaneous charging
Longevity
Fully enclosed way of construction
Patented deviation and toothed belt tension
Sort processing times
Micro-positioning system - max. 50 x 100 x 12.7 mm, max. 30 mm/s | SF-3000 BS series
With one SpaceFAB SF-3000 BS all six degrees of freedom can be moved without additional positioning elements. The low weight of the moving platformallows high-dynamic positioning processes. learn more...
The non pre-loaded design can easily carry up to 2 kg center mounted. SpaceFAB SF-3000 BS is operating in closed...
The non pre-loaded design can easily carry up to 2 kg center mounted. SpaceFAB SF-3000 BS is operating in closed...
Micro-positioning system - max. 50 x 100 x 12.7 mm, max. 30 mm/s | SF-3000 BS series
With one SpaceFAB SF-3000 BS all six degrees of freedom can be moved without additional positioning elements. The low weight of the moving platformallows high-dynamic positioning processes. learn more...
The non pre-loaded design can easily carry up to 2 kg center mounted. SpaceFAB SF-3000 BS is operating in closed loop mode. SpaceFAB SF-3000 BS was especially developed for applications in fiber-optic alignment. Furthermore SpaceFAB SF-3000 BS is perfectly designed for auto alignment of optical components, micro-fabrication and bio-genetic. The core software used for the SpaceFAB. SF-3000 BS is the Motion Server. The Motion Server includes all the mathematical transformations so that the user can start movements directly by specifying the six coordinates x, y, z, Rx, Ry and Rz. It is also possible to move arbitrary trajectories in a contouring mode. The Motion Server can be used as a stand alone software or in combination with or selfmade applications. These applications can be written in any modern programming language, the communication is done with TCP/IP. navOn request: A vacuum-version of the SpaceFAB SF-3000 BS is available in HV and UHV type navAsk for: SpaceFAB SF-3000 BS Simulator. A program especially developed for simulation of travel range.
The non pre-loaded design can easily carry up to 2 kg center mounted. SpaceFAB SF-3000 BS is operating in closed loop mode. SpaceFAB SF-3000 BS was especially developed for applications in fiber-optic alignment. Furthermore SpaceFAB SF-3000 BS is perfectly designed for auto alignment of optical components, micro-fabrication and bio-genetic. The core software used for the SpaceFAB. SF-3000 BS is the Motion Server. The Motion Server includes all the mathematical transformations so that the user can start movements directly by specifying the six coordinates x, y, z, Rx, Ry and Rz. It is also possible to move arbitrary trajectories in a contouring mode. The Motion Server can be used as a stand alone software or in combination with or selfmade applications. These applications can be written in any modern programming language, the communication is done with TCP/IP. navOn request: A vacuum-version of the SpaceFAB SF-3000 BS is available in HV and UHV type navAsk for: SpaceFAB SF-3000 BS Simulator. A program especially developed for simulation of travel range.
Micro-positioning system - max. 50 x 100 x 12.7 mm, max. 10 mm/s | SF-3000 LS series
The SpaceFAB SF-3000 LS is a low cost alternative to PI miCos SpaceFAB SF-3000 BS and is especially designed for precision positioning. With one SpaceFAB SF-3000 LS all six degrees of freedom... learn more...
can be moved...
can be moved...
Micro-positioning system - max. 50 x 100 x 12.7 mm, max. 10 mm/s | SF-3000 LS series
The SpaceFAB SF-3000 LS is a low cost alternative to PI miCos SpaceFAB SF-3000 BS and is especially designed for precision positioning. With one SpaceFAB SF-3000 LS all six degrees of freedom... learn more...
can be moved without additional positioning elements SpaceFAB SF-3000 LS was especially developed for easy alignment applications. Furthermore SpaceFAB SF-3000 LS is perfectly designed for micro-fabrication and biomedical. The core software used for the SpaceFAB SF-3000 LS is the PI miCos Motion Server. The Motion Server includes all the mathematical transformations so that the user can start movements directl y by specifying the six coordinates x, y, z, Rx, Ry and Rz. The Motion Server can be used as a stand alone software or in combination with PI miCos or selfmade applications. These applications can be written in any modern programming language, the communication is done via TCP/IP.
can be moved without additional positioning elements SpaceFAB SF-3000 LS was especially developed for easy alignment applications. Furthermore SpaceFAB SF-3000 LS is perfectly designed for micro-fabrication and biomedical. The core software used for the SpaceFAB SF-3000 LS is the PI miCos Motion Server. The Motion Server includes all the mathematical transformations so that the user can start movements directl y by specifying the six coordinates x, y, z, Rx, Ry and Rz. The Motion Server can be used as a stand alone software or in combination with PI miCos or selfmade applications. These applications can be written in any modern programming language, the communication is done via TCP/IP.
Micro-positioning system - max. 5 x 5 x 3.5 mm, max. 5 mm/s | SF-2500 LS series
The SpaceFAB SF-2500 LS is a low cost alternative to PI miCos SpaceFAB SF-Piezo and is especially designed for precision positioning. With one SpaceFAB SF-2500 LS all six degrees of freedom can be moved without additional positioning...
Micro-positioning system - max. 5 x 5 x 3.5 mm, max. 5 mm/s | SF-2500 LS series
The SpaceFAB SF-2500 LS is a low cost alternative to PI miCos SpaceFAB SF-Piezo and is especially designed for precision positioning. With one SpaceFAB SF-2500 LS all six degrees of freedom can be moved without additional positioning elements. learn more...
SpaceFAB SF-2500 LS was especially developed for easy alignment applications. Furthermore SpaceFAB SF-2500 LS is perfectly designed for micro-fabrication and biomedical. The core software used for the SpaceFAB SF-2500 LS is the PI miCos Motion Server. The Motion Server includes all the mathematical transformations so that the user can start movements directl y by specifying the six coordinates x, y, z, Rx, Ry and Rz. The Motion Server can be used as a stand alone software or in combination with PI miCos or selfmade applications. These applications can be written in any modern programming language, the communication is done via TCP/IP.
SpaceFAB SF-2500 LS was especially developed for easy alignment applications. Furthermore SpaceFAB SF-2500 LS is perfectly designed for micro-fabrication and biomedical. The core software used for the SpaceFAB SF-2500 LS is the PI miCos Motion Server. The Motion Server includes all the mathematical transformations so that the user can start movements directl y by specifying the six coordinates x, y, z, Rx, Ry and Rz. The Motion Server can be used as a stand alone software or in combination with PI miCos or selfmade applications. These applications can be written in any modern programming language, the communication is done via TCP/IP.
Micro-pitch positioning table - max. 305 mm, max. 90 mm/s | HPS-170 series
The Precision Stage HPS-170 was developed to meet high precision positioning demands. Due to its precise and smooth operation this linear stage is perfectly suited for...
Micro-pitch positioning table - max. 305 mm, max. 90 mm/s | HPS-170 series
The Precision Stage HPS-170 was developed to meet high precision positioning demands. Due to its precise and smooth operation this linear stage is perfectly suited for...
Motorized micropositioner - max. 52 mm, 8 mm/s | MTS-65 series
The micro stage MTS-65 was developed for industrial application with limited space conditions and is typically used for the positioning of laser diodes and optical parts. Driven...
Motorized micropositioner - max. 52 mm, 8 mm/s | MTS-65 series
The micro stage MTS-65 was developed for industrial application with limited space conditions and is typically used for the positioning of laser diodes and optical parts. Driven...