+7 (812) 645-08-06
Vibratory finishing machines
select brand
Vibratory finishing machine - KVF3
Great for deburring, polishing, finishing!
Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Send us your parts for testing...
Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Send us your parts for testing...
Vibratory finishing machine - KVF3
Great for deburring, polishing, finishing!
Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Send us your parts for testing !
3.3 cubic ft. capacity
Quiet operation with lid !!!
500 lbs capacity, compact design!
Portable-on wheels, unload media into bucket from end of machine.
Vibra action rotates media with water spray/coolant pump and tank.
Easy to load and unload
Rugged construction
Steel tub w/cast urethane lining
Specifications:
Cabinet: 36″ W x 27″ D x 36″ H
Tub: 28″ L x 15″ W x 15″ H
Motor: 3/4 hp 1 phase 110 VAC
Shipping weight: 640 LBS
Model: KVF3
Made in USA
Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Send us your parts for testing !
3.3 cubic ft. capacity
Quiet operation with lid !!!
500 lbs capacity, compact design!
Portable-on wheels, unload media into bucket from end of machine.
Vibra action rotates media with water spray/coolant pump and tank.
Easy to load and unload
Rugged construction
Steel tub w/cast urethane lining
Specifications:
Cabinet: 36″ W x 27″ D x 36″ H
Tub: 28″ L x 15″ W x 15″ H
Motor: 3/4 hp 1 phase 110 VAC
Shipping weight: 640 LBS
Model: KVF3
Made in USA
Finishing vibrator - DLR series
The SWECO finishing mills are designed with time-tested technology to provide three-dimensional Vibro-Energy motion. The motion travel around the chamber in a helical/orbital path which subjects the...
Finishing vibrator - DLR series
The SWECO finishing mills are designed with time-tested technology to provide three-dimensional Vibro-Energy motion. The motion travel around the chamber in a helical/orbital path which subjects the parts and media to a consistent high frequency tilting movement. The resulting compressive scrubbing action enables to clean and also remove burrs, round sharp corners, and smooths out surface impressions. The full adjustment of the vertical/horizontal amplitudes and the rate of vibration enables to quickly and efficiently handle the finishing requirements. The batch mills are ideally suitable for use with external separating systems, manual parts unloading and for processes that have no media and the enables to easily discharge the entire load through the bottom door.
Finishing vibrator - 1 - 24 ft³ | FMD series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work,...
Finishing vibrator - 1 - 24 ft³ | FMD series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing.
The Long Radius Series contain mills with capacities ranging from 1 to 24 cubic feet. That's 300 to 7,200 pounds of load capacity. These mills can process parts as large as 36 inches long. They also have special features for low noise operation and minimum vibration transfer to the floor. The series has an improved internal parts/media separation system that installs quickly for faster unloading.
The Long Radius Series contain mills with capacities ranging from 1 to 24 cubic feet. That's 300 to 7,200 pounds of load capacity. These mills can process parts as large as 36 inches long. They also have special features for low noise operation and minimum vibration transfer to the floor. The series has an improved internal parts/media separation system that installs quickly for faster unloading.
Finishing vibrator - 1.2 - 20 ft³ | FM series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint...
Finishing vibrator - 1.2 - 20 ft³ | FM series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing.
The Batch Series contain mills with capacities ranging from 1.2 to 20 cubic feet. That's 360 to 6,000 pounds of load capacity. These mills can process parts as large as 30 inches long. There is an open top for visual inspection or parts retrieval without stopping the process, and there is no transmitted vibration to the floor. Additionally, they have a higher capacity per horsepower than other types of vibrating units.
The Batch Series contain mills with capacities ranging from 1.2 to 20 cubic feet. That's 360 to 6,000 pounds of load capacity. These mills can process parts as large as 30 inches long. There is an open top for visual inspection or parts retrieval without stopping the process, and there is no transmitted vibration to the floor. Additionally, they have a higher capacity per horsepower than other types of vibrating units.
Finishing vibrator - 5 - 20 ft³ | FMS series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work,...
Finishing vibrator - 5 - 20 ft³ | FMS series
SWECO Vibro-Energy Finishing Mills perform the complete spectrum of finishing parts from rough to delicate. Included are deburring, flash removal, edge-breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, and the development of reflectivity. They are also ideal for ball burnishing.
The Spiral Series contain mills with capacities ranging from 5 to 20 cubic feet. That's 1,500 to 6,000 pounds of load capacity. These mills can process parts as large as 18 inches long. The Batch Series provides both batch automatic and continuous finishing, depending on the process requirements. They can process parts with all types of media, including steel burnishing shapes plus ceramic and plastic preforms.
The Spiral Series contain mills with capacities ranging from 5 to 20 cubic feet. That's 1,500 to 6,000 pounds of load capacity. These mills can process parts as large as 18 inches long. The Batch Series provides both batch automatic and continuous finishing, depending on the process requirements. They can process parts with all types of media, including steel burnishing shapes plus ceramic and plastic preforms.
Circular finishing vibrator / for deburring
Mass finishing vibrators are the most usual equipment for deburring and polishing operations bulk.
Principle of operation of vibrators :
The movement...
Principle of operation of vibrators :
The movement...
Circular finishing vibrator / for deburring
Mass finishing vibrators are the most usual equipment for deburring and polishing operations bulk.
Principle of operation of vibrators :
The movement of vibrators is three-dimensional type ; this is a rotation about a horizontal axis, generating a spiral shape.
The vibration generator of vibrators consists of a vertical motor axis, a spring assembly holding blocks and eccentrics.
Adjusting the angle between each eccentric block, and their mass determines the amplitude and vibration mode.
These vibrators can be equipped with integrated separation system, as well as metering pump for continuously injecting liquid compounds
Principle of operation of vibrators :
The movement of vibrators is three-dimensional type ; this is a rotation about a horizontal axis, generating a spiral shape.
The vibration generator of vibrators consists of a vertical motor axis, a spring assembly holding blocks and eccentrics.
Adjusting the angle between each eccentric block, and their mass determines the amplitude and vibration mode.
These vibrators can be equipped with integrated separation system, as well as metering pump for continuously injecting liquid compounds
Multi-spindle vibratory finishing machine
Rotary barrels are rotary motion equipment - and non-vibrating.
They can provide very good...
They can provide very good...
Multi-spindle vibratory finishing machine
Rotary barrels are rotary motion equipment - and non-vibrating.
They can provide very good surface due to sliding motion between the parts and the media (wave phenomenon).
The disadvantage of these devices is the importance of cycle time.
Ergonomics can be quite interesting allowing to transfer the load (workpieces and chips) directly (in) a sieving equipment.
They can provide very good surface due to sliding motion between the parts and the media (wave phenomenon).
The disadvantage of these devices is the importance of cycle time.
Ergonomics can be quite interesting allowing to transfer the load (workpieces and chips) directly (in) a sieving equipment.
Linear finishing vibrator / for deburring
Mass finishing vibrators are the most usual equipment for deburring and polishing operations bulk.
Principle of operation of vibrators :
The movement...
Principle of operation of vibrators :
The movement...
Linear finishing vibrator / for deburring
Mass finishing vibrators are the most usual equipment for deburring and polishing operations bulk.
Principle of operation of vibrators :
The movement of vibrators is three-dimensional type ; this is a rotation about a horizontal axis, generating a spiral shape.
The vibration generator of vibrators consists of a vertical motor axis, a spring assembly holding blocks and eccentrics.
Adjusting the angle between each eccentric block, and their mass determines the amplitude and vibration mode.
These vibrators can be equipped with integrated separation system, as well as metering pump for continuously injecting liquid compounds.
Principle of operation of vibrators :
The movement of vibrators is three-dimensional type ; this is a rotation about a horizontal axis, generating a spiral shape.
The vibration generator of vibrators consists of a vertical motor axis, a spring assembly holding blocks and eccentrics.
Adjusting the angle between each eccentric block, and their mass determines the amplitude and vibration mode.
These vibrators can be equipped with integrated separation system, as well as metering pump for continuously injecting liquid compounds.