+7 (812) 645-08-06
Chamfering machines
select brand
Contour chamfering machine / straight edges / workpiece - KKF 4
The spindle bearings mounted under pre-stress lend high-precision concentricity
to the KKF 4. It can be used both full hard metal-form cutters and
insert milling cutters, by means of which an excellent useful life is achieved.
Professional advantages:
- Big supporting table
- Very good concentricity
- Thanks to its belt transmission, the machine can be used...
to the KKF 4. It can be used both full hard metal-form cutters and
insert milling cutters, by means of which an excellent useful life is achieved.
Professional advantages:
- Big supporting table
- Very good concentricity
- Thanks to its belt transmission, the machine can be used...
Contour chamfering machine / straight edges / workpiece - KKF 4
The spindle bearings mounted under pre-stress lend high-precision concentricity
to the KKF 4. It can be used both full hard metal-form cutters and
insert milling cutters, by means of which an excellent useful life is achieved.
Professional advantages:
- Big supporting table
- Very good concentricity
- Thanks to its belt transmission, the machine can be used...
to the KKF 4. It can be used both full hard metal-form cutters and
insert milling cutters, by means of which an excellent useful life is achieved.
Professional advantages:
- Big supporting table
- Very good concentricity
- Thanks to its belt transmission, the machine can be used...
Chamfering machine - KSM 130
Suitable for precise deburring and chamfering of straight edges at soft and
hard workpieces. It is available with wet-grinding or dust extraction device.
Application:
- Soft and hard materials...
hard workpieces. It is available with wet-grinding or dust extraction device.
Application:
- Soft and hard materials...
Chamfering machine - KSM 130
Suitable for precise deburring and chamfering of straight edges at soft and
hard workpieces. It is available with wet-grinding or dust extraction device.
Application:
- Soft and hard materials up to 63 HRC
Options:
- Mobile undercarriage
- Dust extraction (only for KSM 125)
Features:
- Sturdy construction with grinding disk adjusting button
- Water cooling provides workpiece and grinding disk
- V-Prism with micrometer chamfer adjustment
- Sturdy conical 2-zone grinding disk for strong material removal
Delivery contents:
- Standard accessories
- Grinding disk
- Operating instructions
- Extraction socket (only for KSM 125)
- Water tub and pump (only for KSM 130)
Further accessories can be found
in our Accessory Catalogue.
hard workpieces. It is available with wet-grinding or dust extraction device.
Application:
- Soft and hard materials up to 63 HRC
Options:
- Mobile undercarriage
- Dust extraction (only for KSM 125)
Features:
- Sturdy construction with grinding disk adjusting button
- Water cooling provides workpiece and grinding disk
- V-Prism with micrometer chamfer adjustment
- Sturdy conical 2-zone grinding disk for strong material removal
Delivery contents:
- Standard accessories
- Grinding disk
- Operating instructions
- Extraction socket (only for KSM 125)
- Water tub and pump (only for KSM 130)
Further accessories can be found
in our Accessory Catalogue.
Straight edges chamfering machine / contour / workpiece - KKF 3
It is our most powerful chamfering machine for edges and contours, having
the biggest supporting table. Its sturdy insert milling cutters are ideally suitable for processing larger and heavier work pieces.
Professional advantages:
- Big supporting table
- Sturdy insert milling cutter
- For continuous operation
Application:
-...
the biggest supporting table. Its sturdy insert milling cutters are ideally suitable for processing larger and heavier work pieces.
Professional advantages:
- Big supporting table
- Sturdy insert milling cutter
- For continuous operation
Application:
-...
Straight edges chamfering machine / contour / workpiece - KKF 3
It is our most powerful chamfering machine for edges and contours, having
the biggest supporting table. Its sturdy insert milling cutters are ideally suitable for processing larger and heavier work pieces.
Professional advantages:
- Big supporting table
- Sturdy insert milling cutter
- For continuous operation
Application:
-...
the biggest supporting table. Its sturdy insert milling cutters are ideally suitable for processing larger and heavier work pieces.
Professional advantages:
- Big supporting table
- Sturdy insert milling cutter
- For continuous operation
Application:
-...
Contour chamfering machine / workpiece - ASO 650 / ASO 650-WSL
Deburring and chamfering of big work pieces is an easy job. Rounding of
edges in use with radius inserts is also possible. Speed control is very useful
when processing aluminum or stainless steel.
Professional advantages:
- Axial cutter head adjustment for utilization of inserts by small chamfers
- Chamfer adjustment by...
edges in use with radius inserts is also possible. Speed control is very useful
when processing aluminum or stainless steel.
Professional advantages:
- Axial cutter head adjustment for utilization of inserts by small chamfers
- Chamfer adjustment by...
Contour chamfering machine / workpiece - ASO 650 / ASO 650-WSL
Deburring and chamfering of big work pieces is an easy job. Rounding of
edges in use with radius inserts is also possible. Speed control is very useful
when processing aluminum or stainless steel.
Professional advantages:
- Axial cutter head adjustment for utilization of inserts by small chamfers
- Chamfer adjustment by micrometer button
- For continuous operation
Application:
- Clean and burr-free chamfering
- Suitable for sturdy continuous operation
- For preparing weld seams
- With short or thin work pieces below 5 mm, the guide rails can be turned and used with a 2 mm cutting gap
Options:
- Automatic feed
- Radius cutting inserts R1 - 10 mm
Features:
- Sturdy cast iron construction with swarf drawer
- Wear-resistant, hardened and ground guide rails
- Precise chamfer adjustment by micrometer button
- Wide variety of different cutting inserts for various materials
- Long useful life due to sturdy square cutting inserts
and circumferential cutting
Delivery contents:
- Allen key 4 mm
- Side milling cutter SP 12 (only with ASO 650)
- Side milling cutter SP 15 (only with ASO 650-WSL)
- Electric cable without plug
- Operating instructions
Further accessories can be found
in our Accessory Catalogue.
edges in use with radius inserts is also possible. Speed control is very useful
when processing aluminum or stainless steel.
Professional advantages:
- Axial cutter head adjustment for utilization of inserts by small chamfers
- Chamfer adjustment by micrometer button
- For continuous operation
Application:
- Clean and burr-free chamfering
- Suitable for sturdy continuous operation
- For preparing weld seams
- With short or thin work pieces below 5 mm, the guide rails can be turned and used with a 2 mm cutting gap
Options:
- Automatic feed
- Radius cutting inserts R1 - 10 mm
Features:
- Sturdy cast iron construction with swarf drawer
- Wear-resistant, hardened and ground guide rails
- Precise chamfer adjustment by micrometer button
- Wide variety of different cutting inserts for various materials
- Long useful life due to sturdy square cutting inserts
and circumferential cutting
Delivery contents:
- Allen key 4 mm
- Side milling cutter SP 12 (only with ASO 650)
- Side milling cutter SP 15 (only with ASO 650-WSL)
- Electric cable without plug
- Operating instructions
Further accessories can be found
in our Accessory Catalogue.
Portable chamfering machine / pneumatic - ASO 310
The pneumatic, handheld Chamfering Machine is an ideal
solution for deburring straight edges and contours. Due to its
lightweight and ergonomic structural shape, it exhibits easy
handling and operation.
Application:
- Chamfering of flat work pieces made of steel, max....
solution for deburring straight edges and contours. Due to its
lightweight and ergonomic structural shape, it exhibits easy
handling and operation.
Application:
- Chamfering of flat work pieces made of steel, max....
Portable chamfering machine / pneumatic - ASO 310
The pneumatic, handheld Chamfering Machine is an ideal
solution for deburring straight edges and contours. Due to its
lightweight and ergonomic structural shape, it exhibits easy
handling and operation.
Application:
- Chamfering of flat work pieces made of steel, max....
solution for deburring straight edges and contours. Due to its
lightweight and ergonomic structural shape, it exhibits easy
handling and operation.
Application:
- Chamfering of flat work pieces made of steel, max....
Portable chamfering machine / X-ray - 1 - 5 mm | SMA 20-P
The SMA 20-P provides bevel or radius cutting of straight and contoured edges, and cutouts of small plates or segments....
Portable chamfering machine / X-ray - 1 - 5 mm | SMA 20-P
The SMA 20-P provides bevel or radius cutting of straight and contoured edges, and cutouts of small plates or segments. The unit utilizes an indexable carbide inserts, for the creation of a chamfer edge for weld or paint prep.
The equipment may be used in deburring, and in welding preparation. It is suitable for bevelling carbon steel, aluminium, alloy steel, and stainless steel. It also offers a bevel radius of 2 to 3 mm, and size of 1 to 5 mm.
The equipment may be used in deburring, and in welding preparation. It is suitable for bevelling carbon steel, aluminium, alloy steel, and stainless steel. It also offers a bevel radius of 2 to 3 mm, and size of 1 to 5 mm.
Pneumatic chamfering machine - 14,000 min-1 |FF103A
Chamfer width and chamfer angle can be adjusted precisely and reproducible.
Precise...
Precise...
Pneumatic chamfering machine - 14,000 min-1 |FF103A
Chamfer width and chamfer angle can be adjusted precisely and reproducible.
Precise working thanks to great support edge.
Indexable insert is simple to change and to adjust (4-side blade) and practices good, efficient economy.
Pipe outer edge can be also processed with standard accessory.
Precise working thanks to great support edge.
Indexable insert is simple to change and to adjust (4-side blade) and practices good, efficient economy.
Pipe outer edge can be also processed with standard accessory.
Pneumatic chamfering machine - 13 000 rpm | CB02
The CB02 is an edge milling tool from Holger Clasen, and can be used for internal and external chamfering...
Pneumatic chamfering machine - 13 000 rpm | CB02
The CB02 is an edge milling tool from Holger Clasen, and can be used for internal and external chamfering of curve-lines. It can easily be positioned continuously based on the chamfer angle. There is an option to accurately adjust the chamfer dimensions based on the accessory adjust gauge.
The unit can be securely used due to its finger protection and safety valve.
The unit can be securely used due to its finger protection and safety valve.