+7 (812) 645-08-06
Other tools for pipes, Tubes, Cables
select brand
Tube squaring machine - %u2300 2 - 25.4 mm | SE25
The PROTEM's SE25 series outside clamping tube and fittings facing machines are portable, offering usability for field work, mostly for thin tubes, fittings, micro fittings and elbows....
Tube squaring machine - %u2300 2 - 25.4 mm | SE25
The PROTEM's SE25 series outside clamping tube and fittings facing machines are portable, offering usability for field work, mostly for thin tubes, fittings, micro fittings and elbows. They are very lightweight, and perform clamping through collets, with one collet per diameter. They operate with high levels of accuracy, and can be used as cordless or electrically connected. They can be mounted onto a bench support. They are often a part of bigger orbital welding machines, for tube preparation for welding operations, mostly in semi-conductor industry, pharmaceutical and aerospace industry, clean rooms, or food processing. They feature machining capacity from 2 to 25.4 mm OD, with 10 mm feed, and speeds of 350 or 1,200 RPM.
Tube squaring machine - %u2300 3 - 30 mm | Masterline SL-30
MASTERLINE SL-30
The MASTERLINE SL-30 is used for the following purposes:
• Tube machining units for tubes, fittings, micro-fittings, elbows and tees.
• For tube ODs from 3 to 30 mm
(0.119 inch / 1.19 inch)
The MASTERLINE SL series are handy, condensed, less - weight and...
The MASTERLINE SL-30 is used for the following purposes:
• Tube machining units for tubes, fittings, micro-fittings, elbows and tees.
• For tube ODs from 3 to 30 mm
(0.119 inch / 1.19 inch)
The MASTERLINE SL series are handy, condensed, less - weight and...
Tube squaring machine - %u2300 3 - 30 mm | Masterline SL-30
MASTERLINE SL-30
The MASTERLINE SL-30 is used for the following purposes:
• Tube machining units for tubes, fittings, micro-fittings, elbows and tees.
• For tube ODs from 3 to 30 mm
(0.119 inch / 1.19 inch)
The MASTERLINE SL series are handy, condensed, less - weight and simple – to - use, range of machines intended for squaring and / or beveling thin - wall tubing. Tubes are clamped on the exterior by means of a collet that means that they are held in place absolutely concentrically.
With machinery from the MASTERLINE SL variety, preparing tubes perfectly is simple and accurate for welding and one can profit from substantial time – savings.
The MASTERLINE SL-30 has the following features:
• Rapid collet and clamping head changing
• Tiny sized element particularly intended for working on narrow tube bundles
• Dependable quality in machining
• No burrs in machining
• No heat - affected areas
• No bends on tubes, connections, micro - connections or elbows with the collet clamping system
• A machine that could also be bench - mounted
• A strong machine that has a 1050W motor.
The MASTERLINE SL-30 is used for the following purposes:
• Tube machining units for tubes, fittings, micro-fittings, elbows and tees.
• For tube ODs from 3 to 30 mm
(0.119 inch / 1.19 inch)
The MASTERLINE SL series are handy, condensed, less - weight and simple – to - use, range of machines intended for squaring and / or beveling thin - wall tubing. Tubes are clamped on the exterior by means of a collet that means that they are held in place absolutely concentrically.
With machinery from the MASTERLINE SL variety, preparing tubes perfectly is simple and accurate for welding and one can profit from substantial time – savings.
The MASTERLINE SL-30 has the following features:
• Rapid collet and clamping head changing
• Tiny sized element particularly intended for working on narrow tube bundles
• Dependable quality in machining
• No burrs in machining
• No heat - affected areas
• No bends on tubes, connections, micro - connections or elbows with the collet clamping system
• A machine that could also be bench - mounted
• A strong machine that has a 1050W motor.
Tube squaring machine - SE25
FACINGMASTER SE25
The FACINGMASTER SE25 squaring machine for tubes, fittings, micro-fittings, elbows and tees
Portable, compact, lightweight and easy-to-use,...
The FACINGMASTER SE25 squaring machine for tubes, fittings, micro-fittings, elbows and tees
Portable, compact, lightweight and easy-to-use,...
Tube squaring machine - SE25
FACINGMASTER SE25
The FACINGMASTER SE25 squaring machine for tubes, fittings, micro-fittings, elbows and tees
Portable, compact, lightweight and easy-to-use, the SE-25 machines is designed for squaring and/or beveling thin-wall tubing. Clamping is done on the outside diameter of the tube by means of a collet.
A different collet is required for each diameter
No deformation or damage to tubes!
No heat-affected zone
No burrs!
Battery or mains powered. Can be bench-mounted
The SE-25 is the essential complement to your orbital welding machines and is designed for preparing tubes perfectly for welding operations.
The FACINGMASTER SE25 squaring machine for tubes, fittings, micro-fittings, elbows and tees
Portable, compact, lightweight and easy-to-use, the SE-25 machines is designed for squaring and/or beveling thin-wall tubing. Clamping is done on the outside diameter of the tube by means of a collet.
A different collet is required for each diameter
No deformation or damage to tubes!
No heat-affected zone
No burrs!
Battery or mains powered. Can be bench-mounted
The SE-25 is the essential complement to your orbital welding machines and is designed for preparing tubes perfectly for welding operations.
Tube cutter - ⌀60.3 - 168 mm | MF-170
The machine model MF - Series has been particularly intended to cut and bevel tubes and pipes in the range of 60.3 mm OD to 168 mm OD in single process.
The probable bevel angles...
The probable bevel angles...
Tube cutter - ⌀60.3 - 168 mm | MF-170
The machine model MF - Series has been particularly intended to cut and bevel tubes and pipes in the range of 60.3 mm OD to 168 mm OD in single process.
The probable bevel angles...
The probable bevel angles...
Portable surfacing, boring and grinding machine for valves and flanges - ⌀ 0-2210 / SERCO XP
The TA 240 has a pneumatic drive for the feed as well as a pneumatic driving motor. Either...
Portable surfacing, boring and grinding machine for valves and flanges - ⌀ 0-2210 / SERCO XP
The TA 240 has a pneumatic drive for the feed as well as a pneumatic driving motor. Either manual or automatic machining can be carried out. It has four attachment arms which can be adjusted to 1/100mm as well as an adjustable axial feed for each sliding gauge. There are 2 lubrication filters to decrease pressure, with a 1/4 valve and air connections.
Tube cutter - max. ø 110 - 160 mm
The pipe cutting tool is developed for cutting of plastic pipes of diameter ranging from 20 to 75mm.