+7 (812) 645-08-06
Other tools for pipes, Tubes, Cables
select brand
Manual shear / hydraulic - 104 kN, 95 mm | ICU 05 A 10
Our industrial lineup is particularly engineered for a varied range of industrial...
Manual shear / hydraulic - 104 kN, 95 mm | ICU 05 A 10
Our industrial lineup is particularly engineered for a varied range of industrial grade cutting applications. The ICU 05 A 10 cutter is fitted with cable blades combined with special blade cutting. Hence, this unit is perfectly suited for several applications to include cable production and cable recycling.
Hydraulic shear / manual - 124 kN, 98 mm | ICU 05 A 30
Our industrial cutter range is specially designed for a wide range of industrial cutting applications. The cutter ICU 05 A 30 has general standard blades....
Hydraulic shear / manual - 124 kN, 98 mm | ICU 05 A 30
Our industrial cutter range is specially designed for a wide range of industrial cutting applications. The cutter ICU 05 A 30 has general standard blades. Therefore this cutter is very much suitable in applications like:
Car recycling: Catalytic converters, exhaust pipes, doors, A- and B-posts, drive shafts (hollow), engine mountings, steering columns, bumpers, bull bars and pressed steel wishbones.
Demolition: Rod material, tube profiles, frames, construction materials, wood, roots (trees), fuel pipes, heating pipes, small cables.
Foundry: Removing risers and feeders from aluminium castings.
Car recycling: Catalytic converters, exhaust pipes, doors, A- and B-posts, drive shafts (hollow), engine mountings, steering columns, bumpers, bull bars and pressed steel wishbones.
Demolition: Rod material, tube profiles, frames, construction materials, wood, roots (trees), fuel pipes, heating pipes, small cables.
Foundry: Removing risers and feeders from aluminium castings.
Hydraulic shear / manual - 172 kN, 191 mm | ICU 05 A 60
Lightweight, user-friendly and ergonomic
Flat lever hinge pin construction...
Flat lever hinge pin construction...
Hydraulic shear / manual - 172 kN, 191 mm | ICU 05 A 60
Lightweight, user-friendly and ergonomic
Flat lever hinge pin construction enabling optimum reach
Fast for an efficient (production) process
Stays on torque due to permanent locking of central bolt
Safe
Tools can only be oprated by using both hands
Dead mans function
Guarded moving parts
Flat lever hinge pin construction enabling optimum reach
Fast for an efficient (production) process
Stays on torque due to permanent locking of central bolt
Safe
Tools can only be oprated by using both hands
Dead mans function
Guarded moving parts
Hydraulic shear / manual - 176 kN, 142 mm | ICU 05 A 70
This series of Holmatro industrial cutters is uniquely designed for a wide cross section...
Hydraulic shear / manual - 176 kN, 142 mm | ICU 05 A 70
This series of Holmatro industrial cutters is uniquely designed for a wide cross section of testing in industrial applications. De ICU 05 A 70 cutter, which features blades that have a cutting teeth similar to that of a parrot end. Therefore this cutter is perfectly suitable for applications such as Demolition: scrap, strip, profiles, frames, etc.
Hydraulic shear / manual - 242 kN, 134 mm | ICU 10 A 10
The HOLMATRO's ICU 10 A 10 series portable cutters can be used for various testing industrial...
Hydraulic shear / manual - 242 kN, 134 mm | ICU 10 A 10
The HOLMATRO's ICU 10 A 10 series portable cutters can be used for various testing industrial applications, they feature cable blades with special bade guiding, and are mostly used for cable recycling and production of telephone, ground, electronic and steel cables. They feature a cutting force of 242 kN and cutting opening of 134 mm.
Tube squaring machine - ø 3 - 25.4 mm | DE 3-25
The DE 3-25 comes with 1 collar per diameter in carbon or stainless steel option....
Tube squaring machine - ø 3 - 25.4 mm | DE 3-25
The DE 3-25 comes with 1 collar per diameter in carbon or stainless steel option. The rotation speed is from 0 to 400 rpm with two speeds. The device has a chip protection and a chip deflector. The carbide insert is four sided.
It comes in a metallic box with 1 charger and 2 batteries.
It comes in a metallic box with 1 charger and 2 batteries.
Tube cutter - ø 114.3 - 219 mm | RS 100
The machines from The RS series are ideally used for cutting thin pipe for in situ job. These tools are quite easy to handle and opening heads can be quickly maneuvered around the pipe.
Tube cutter - ø 4 - 26 mm | CT 4-26
COFIM Company has designed the Pipe-cutting machine CT 4-26 with the diameters ranging from 4 mm...
Tube cutter - ø 4 - 26 mm | CT 4-26
COFIM Company has designed the Pipe-cutting machine CT 4-26 with the diameters ranging from 4 mm to 26 mm. Technical aspects of CT 4-26 include clamping range of 4 to 26 mm O.D. It has auto feed. It is provided with clamping instruction handbook. CT 4-26 is equipped with an electrical motor of 750 W. The speed of the cutter can be adjusted between 1 to 10. The equipment weighs 10 Kg.
Tube cutter - ø 7 - 61 mm | CT 7-61
The COFIM's pipe cutting machines of the CT 4-26 series feature a clamping...
Tube cutter - ø 7 - 61 mm | CT 7-61
The COFIM's pipe cutting machines of the CT 4-26 series feature a clamping range from 4 to 26 mm OD, automatic feed, manual clamping, 750 W electric motor, speed adjustment from 1 to 10, and weight of 10 kg. They are highly durable, robust, and guarantee continuous and reliable operation.
Tube cutter - ø 76 - 133 mm | CT133
The CT133 is a unit manufactured by COFIM industries. It is a tube cutter with a clamping range of 76 to 133 mm O.D and it has a feed that is auto. It has a motor that is eleectric in 750 W. It weighs 40 Kg in nature.
High-pressure cleaner / tube
Applications: for pneumatic lines, pressure tube for conveying water, oil and air
Material: Nylon, PU, PE, PTFE, FEP
Properties: freely stretch and compression
* Custom-specific lengths and specification
Material: Nylon, PU, PE, PTFE, FEP
Properties: freely stretch and compression
* Custom-specific lengths and specification