+7 (812) 645-08-06
Ultrasonic cleaning: generators, transducers
select brand
Ultrasonic transducer with soft tips - STP
STP Probes are normal beam compression, low damped for narrow bandwidth. These probes are mainly for use...
Ultrasonic transducer with soft tips - STP
STP Probes are normal beam compression, low damped for narrow bandwidth. These probes are mainly for use in dryscan mode, thru-transmission,in the Sitescan and Masterscan series of flaw detectors. Applications include the testing of composites, rubber, wood, ceramics and friction material. No surface preparation is required for the majority of applications. Ideally suited for test specimens with complex shapes.
Ultrasonic transducer with delay line - RDT
Sonatest Delay Line transducers provide outstanding near surface resolution and are mainly used...
Ultrasonic transducer with delay line - RDT
Sonatest Delay Line transducers provide outstanding near surface resolution and are mainly used for thickness gauging or flaw detection in thin materials. Ideal for Aerospace and Composite inspection, other applications include bond testing, glass, brazed joints, machines parts and tube & pipe.
Special sizes are available on requests.
Special sizes are available on requests.
Ultrasonic generator / burst - 30-800kHz, 1kV | OPGEN
OPGEN ULTRASONIC BURST GENERATOR PULSER
http://www.optel.eu
Generator OPGEN is designed to drive ultrasonic transducers by sinusoidal voltage with programmable burst length. Frequency in range of 30kHz 800kHz and amplitude up to 1kVpp makes OPGEN convenient and versatile tool for ultrasound measurements in air.
Technical...
http://www.optel.eu
Generator OPGEN is designed to drive ultrasonic transducers by sinusoidal voltage with programmable burst length. Frequency in range of 30kHz 800kHz and amplitude up to 1kVpp makes OPGEN convenient and versatile tool for ultrasound measurements in air.
Technical...
Ultrasonic generator / burst - 30-800kHz, 1kV | OPGEN
OPGEN ULTRASONIC BURST GENERATOR PULSER
http://www.optel.eu
Generator OPGEN is designed to drive ultrasonic transducers by sinusoidal voltage with programmable burst length. Frequency in range of 30kHz 800kHz and amplitude up to 1kVpp makes OPGEN convenient and versatile tool for ultrasound measurements in air.
Technical Data:
Operating frequency: 30kHz 800kHz
Output voltage: 100-1000 Vpp
Load impedance: >200 Ω
Output voltage waveform: Bursts of sine wave
Number of cycles in burst Programmable: 1-32
Number of dumping cycles Programmable: 0-32
Communication parameters: RS232
Trigger input TTL level
Device triggers on rising edge of at least 20ns pulses
Input resistance: 820Ω
Features:
- Wide frequency range, especially suitable for air ultrasound measurement
- Synchronizable to external trigger
- Programmable dumping phase after burst for better defined signal duration time
- Capacitive load driving capability
- Class D power stage for high efficiency
- Compact size
- Direct Digital Synthesis (DDS) based signal generation
- RS232 remote control
- dimensions: 169x82x200 mm
- Universal power supply range: 90 - 264VAC, 127 - 370VDC, 47 - 440Hz
For more information please vist our website: www.optel.pl
http://www.optel.eu
Generator OPGEN is designed to drive ultrasonic transducers by sinusoidal voltage with programmable burst length. Frequency in range of 30kHz 800kHz and amplitude up to 1kVpp makes OPGEN convenient and versatile tool for ultrasound measurements in air.
Technical Data:
Operating frequency: 30kHz 800kHz
Output voltage: 100-1000 Vpp
Load impedance: >200 Ω
Output voltage waveform: Bursts of sine wave
Number of cycles in burst Programmable: 1-32
Number of dumping cycles Programmable: 0-32
Communication parameters: RS232
Trigger input TTL level
Device triggers on rising edge of at least 20ns pulses
Input resistance: 820Ω
Features:
- Wide frequency range, especially suitable for air ultrasound measurement
- Synchronizable to external trigger
- Programmable dumping phase after burst for better defined signal duration time
- Capacitive load driving capability
- Class D power stage for high efficiency
- Compact size
- Direct Digital Synthesis (DDS) based signal generation
- RS232 remote control
- dimensions: 169x82x200 mm
- Universal power supply range: 90 - 264VAC, 127 - 370VDC, 47 - 440Hz
For more information please vist our website: www.optel.pl
Plastic welding ultrasonic transducer
The power transducer, manufactured by Optel, is suitable for ultrasonic welding of metal...
Plastic welding ultrasonic transducer
The power transducer, manufactured by Optel, is suitable for ultrasonic welding of metal...
Immersion ultrasonic transducer
Immersion Transducers
An immersion transducer is a single element longitudinal wave transducer with a 1/4 (1/2) wavelength layer acoustically matched to water or other fluid impedance. Immersion transducers...
An immersion transducer is a single element longitudinal wave transducer with a 1/4 (1/2) wavelength layer acoustically matched to water or other fluid impedance. Immersion transducers...
Immersion ultrasonic transducer
Immersion Transducers
An immersion transducer is a single element longitudinal wave transducer with a 1/4 (1/2) wavelength layer acoustically matched to water or other fluid impedance. Immersion transducers are specifically designed to transmit ultrasound in applications where the test parts are partially or wholly immersed in water/fluid, which allows a uniform and fast coupling technique for rapid scanning/inspecting of parts. Focusing lens can be added to increase transducer sensitivity and performance in a particular area of a part. Immersion transducers can be focused either spherically or cylindrically upon request within the allowable focal range for a given frequency and element size.
Frequency range: 1MHz up to 25MHz
We can make the trnasducers according to the customers requirement.
An immersion transducer is a single element longitudinal wave transducer with a 1/4 (1/2) wavelength layer acoustically matched to water or other fluid impedance. Immersion transducers are specifically designed to transmit ultrasound in applications where the test parts are partially or wholly immersed in water/fluid, which allows a uniform and fast coupling technique for rapid scanning/inspecting of parts. Focusing lens can be added to increase transducer sensitivity and performance in a particular area of a part. Immersion transducers can be focused either spherically or cylindrically upon request within the allowable focal range for a given frequency and element size.
Frequency range: 1MHz up to 25MHz
We can make the trnasducers according to the customers requirement.
Direct contact ultrasonic transducer
The direct contact ultrasonic transducer is manufactured by PBP Optel. It has...
Direct contact ultrasonic transducer
The direct contact ultrasonic transducer is manufactured by PBP Optel. It has bandwidth ranging from 2 up to 25 MHz and minimal length of a pulse of 20 ns. It also features a diameter from 1 mm up to limited by available ceramics. Furthermore, it is capable of supply voltage by pulse or burst mode of 700 V.
Ultrasonic generator / for cleaning - CL-I
This ultrasonic universal generator is developed by SinapTec. The inside generator can be...
Ultrasonic generator / for cleaning - CL-I
This ultrasonic universal generator is developed by SinapTec. The inside generator can be set up for controlling of piezoelectric transducers. This works between a frequency that ranges from a few kilohertz to more than 140 kHz with a continuous power from 1 W to 150 W. In addition, it is designed to be compact for easy integration in many environments.