+7 (812) 645-08-06
Stripping machines
select brand
Cable cutting and stripping machine - SC
An ideal solution to separate copper, aluminium and other valuable metals from various cables.
The using of...
The using of...
Cable cutting and stripping machine - SC
An ideal solution to separate copper, aluminium and other valuable metals from various cables.
The using of all models is very simple and fast and it allow in few seconds to process both low and wide diameter cables: form 3 to 100 mm diameter.
Cogelme cables stripper has an anti-block system to avoid knives ruining in case of cables junctions. Regulation of the knives is motorized and easily adapts to different thickness of the covers.
The using of all models is very simple and fast and it allow in few seconds to process both low and wide diameter cables: form 3 to 100 mm diameter.
Cogelme cables stripper has an anti-block system to avoid knives ruining in case of cables junctions. Regulation of the knives is motorized and easily adapts to different thickness of the covers.
Pipe stripping machine - 300 rpm, 2" | PB-32
The Stripping machine is capable of projecting a rotation speed...
Pipe stripping machine - 300 rpm, 2" | PB-32
The Stripping machine is capable of projecting a rotation speed of up to 300 rpm. It is powered by a single motor that can perform from 0,75 kW (1 HP)-400 V 50 Hz 3 ph. Furthermore, it weighs 44 kg and has dimensions of 640 x 520 x 360 mm (74 kg).
Pipe stripping machine - 300 rpm, 2" | PBC-32
The PBC-32 model is manufactured by Dicsa, and is a stripping...
Pipe stripping machine - 300 rpm, 2" | PBC-32
The PBC-32 model is manufactured by Dicsa, and is a stripping machine that has a capacity of 2 inches, which has a rotation speed of 300 rpm. It has a motor rating of 0.75 kW, which has a power rating of 400 V in 3 ph at 50 Hz of frequency.
Pipe stripping machine - 300 rpm, 2" | PBCM-32
The PBC-32 model is manufactured by Dicsa, and is a stripping...
Pipe stripping machine - 300 rpm, 2" | PBCM-32
The PBC-32 model is manufactured by Dicsa, and is a stripping machine that has a capacity of 2 inches, which has a rotation speed of 300 rpm. It has a motor rating of 0.75 kW, which has a power rating of 400 V in 3 ph at 50 Hz of frequency.
Cable stripping machine - ø 10 - 160 mm | Addax
Convincing power
With this cable stripper, you can process almost all types of iron and steel-armoured underground cable. The cable is pushed powerfully over feed rolls against a sharp cotter, whereas the iron armouring and the lead or aluminium cleading, as well as the plastic...
With this cable stripper, you can process almost all types of iron and steel-armoured underground cable. The cable is pushed powerfully over feed rolls against a sharp cotter, whereas the iron armouring and the lead or aluminium cleading, as well as the plastic...
Cable stripping machine - ø 10 - 160 mm | Addax
Convincing power
With this cable stripper, you can process almost all types of iron and steel-armoured underground cable. The cable is pushed powerfully over feed rolls against a sharp cotter, whereas the iron armouring and the lead or aluminium cleading, as well as the plastic isolation are ripped open. In order to ensure a fast and secure processing of the cables, we recommend you to cut the cables into pieces of approximately one meter. As soon as the feed rolls capture the inserted cable, there is no more need for guidance by hand.
Best results achieved by exact alignments
With the handwheel you can adjust the distance of the feed rolls according to the outer diameter of the cable. One and the same alignment is suitable for all cables with the same diameter +/- 10 mm. The cutting depth of the knives can be adjusted by a turning knob and should be geared to the thickness of the cable isolation.
This machine is equipped with a reversing gear which is provided with two cleaning systems removing accumulations of gum, pitch and textile fibres conglomerated in the cogs of the drive wheels.
With this cable stripper, you can process almost all types of iron and steel-armoured underground cable. The cable is pushed powerfully over feed rolls against a sharp cotter, whereas the iron armouring and the lead or aluminium cleading, as well as the plastic isolation are ripped open. In order to ensure a fast and secure processing of the cables, we recommend you to cut the cables into pieces of approximately one meter. As soon as the feed rolls capture the inserted cable, there is no more need for guidance by hand.
Best results achieved by exact alignments
With the handwheel you can adjust the distance of the feed rolls according to the outer diameter of the cable. One and the same alignment is suitable for all cables with the same diameter +/- 10 mm. The cutting depth of the knives can be adjusted by a turning knob and should be geared to the thickness of the cable isolation.
This machine is equipped with a reversing gear which is provided with two cleaning systems removing accumulations of gum, pitch and textile fibres conglomerated in the cogs of the drive wheels.
Cable stripping machine - AWM
The special subject underground cable - the ideal supplement for common cable strippers and processing of overhead wire containing iron or aluminium
The dismantling machine AWM has...
The dismantling machine AWM has...
Cable stripping machine - AWM
The special subject underground cable - the ideal supplement for common cable strippers and processing of overhead wire containing iron or aluminium
The dismantling machine AWM has been designed especially for the dismantling of underground cables. Unlike common cable strippers, this machine does not strip the cable but wind off the iron coating with two drive wheels. Afterwards, the lead coating and the paper isolation can easily be removed with conventional cable strippers. Furhtermore, the "AWM Annett" tears cable rope from any type of overhead wire containing iron or aluminium. After having precut the wire to 3 to 5 m (depending on type), the feed rolls grab the cable ropes and pull them out of the aluminium coating without residues
The dismantling machine AWM has been designed especially for the dismantling of underground cables. Unlike common cable strippers, this machine does not strip the cable but wind off the iron coating with two drive wheels. Afterwards, the lead coating and the paper isolation can easily be removed with conventional cable strippers. Furhtermore, the "AWM Annett" tears cable rope from any type of overhead wire containing iron or aluminium. After having precut the wire to 3 to 5 m (depending on type), the feed rolls grab the cable ropes and pull them out of the aluminium coating without residues
Cable stripping machine - Pecher
Persuasive quality
The high safety standard, the solid welded construction and the automatic blade cleaning make this cable stripper one of the best in its field of application. The machine table...
The high safety standard, the solid welded construction and the automatic blade cleaning make this cable stripper one of the best in its field of application. The machine table...
Cable stripping machine - Pecher
Persuasive quality
The high safety standard, the solid welded construction and the automatic blade cleaning make this cable stripper one of the best in its field of application. The machine table made of stainless steel and the powder-coated frame display the excellent quality.
Clean performance
Due to the precisely countersunk guide rail and the 24 blades made of tempered tool steel, the Pecher can strip heavy gum, PVC and lead coatings without any difficulty. Feed rollers guide the cable which then is stripped on two sides.
Easy handling
The continuous adjustment of the blade rollers can be regulated by an easy to use handwheel. A practical foot control facilitates the fast changing from the forward into the reverse gear.
The high safety standard, the solid welded construction and the automatic blade cleaning make this cable stripper one of the best in its field of application. The machine table made of stainless steel and the powder-coated frame display the excellent quality.
Clean performance
Due to the precisely countersunk guide rail and the 24 blades made of tempered tool steel, the Pecher can strip heavy gum, PVC and lead coatings without any difficulty. Feed rollers guide the cable which then is stripped on two sides.
Easy handling
The continuous adjustment of the blade rollers can be regulated by an easy to use handwheel. A practical foot control facilitates the fast changing from the forward into the reverse gear.
Cable stripping machine - ø 1 - 25 mm | Strip-Tec 1000
Fields of application
The smallest cable stripper of the Strip-Tec...
The smallest cable stripper of the Strip-Tec...
Cable stripping machine - ø 1 - 25 mm | Strip-Tec 1000
Fields of application
The smallest cable stripper of the Strip-Tec family has especially been designed for very fine cable types which normally are processed in a cable granulation plant. This machine with a weight of only 45 kg can process household and computer cable without any difficulty.
The smallest cable stripper of the Strip-Tec family has especially been designed for very fine cable types which normally are processed in a cable granulation plant. This machine with a weight of only 45 kg can process household and computer cable without any difficulty.
Cable stripping machine - ø 5 - 65 mm | Strip-Tec 3000
Easy operation system
The cable stripper "Strip-Tec 3000" is a robust and reliable machine....
The cable stripper "Strip-Tec 3000" is a robust and reliable machine....
Cable stripping machine - ø 5 - 65 mm | Strip-Tec 3000
Easy operation system
The cable stripper "Strip-Tec 3000" is a robust and reliable machine. The well elaborated construction facilitates a fast and easy processing of different materials without the need for time-consuming adjustments. Simply by pushing a button, you can shift from the forward into the reverse motion.
With the easy to use handwheels, the cutting depth can be adjusted.
The cable stripper "Strip-Tec 3000" is a robust and reliable machine. The well elaborated construction facilitates a fast and easy processing of different materials without the need for time-consuming adjustments. Simply by pushing a button, you can shift from the forward into the reverse motion.
With the easy to use handwheels, the cutting depth can be adjusted.