+7 (812) 645-08-06
Hydraulic accumulators
select brand
Hydraulic accumulator - max. 330 bar, 07 - 4 l | ACS, ACSL series
The ACS-ACSL type welded accumulators are made up of a shell in high resistance steel containing a fluid-gas separator. This...
Hydraulic accumulator - max. 330 bar, 07 - 4 l | ACS, ACSL series
The ACS-ACSL type welded accumulators are made up of a shell in high resistance steel containing a fluid-gas separator. This separator is made of nitrile for the standard ACS range, and of hydrogenated nitrile for low temperature applications. The separator is fitted with an anti-extrusion stud, thus allowing rapid and total discharge of the accumulator.
Supplied as standard with a charging screw, the ACS and ACSL accumulators can be fitted with a charging valve on request.
Supplied as standard with a charging screw, the ACS and ACSL accumulators can be fitted with a charging valve on request.
Hydraulic accumulator - max. 500 bar, 0.45 - 10.19 l | AS-AF-AC
LEDUC spherical accumulators (AS-AF-AC) consist of two hemispherical shells which are screwed together...
Hydraulic accumulator - max. 500 bar, 0.45 - 10.19 l | AS-AF-AC
LEDUC spherical accumulators (AS-AF-AC) consist of two hemispherical shells which are screwed together and which hold a diaphragm. This diaphragm has a metal stud which closes off the operation hole when the fluid is completely discharged. There is therefore no danger of damage to the diaphragm. The gas side port is fitted with a charging valve allowing the pressure in the accumulator to be checked or changed.
Bladder hydraulic accumulator - 3.7 - 48.5 l, max. 350 bar | ABVE series
The ABVE bottle type acccumulators consist of:
a forged steel...
a forged steel...
Bladder hydraulic accumulator - 3.7 - 48.5 l, max. 350 bar | ABVE series
The ABVE bottle type acccumulators consist of:
a forged steel body,
a bladder,
a charging valve,
an oil side orifice fitted with a poppet valve which prevents extrusion of the bladder, and an air bleed screw used during system start-up.
a forged steel body,
a bladder,
a charging valve,
an oil side orifice fitted with a poppet valve which prevents extrusion of the bladder, and an air bleed screw used during system start-up.
Piston accumulator - 0.25 - 5 gal | GO series
Rated to 3000 psi, piston type, designed for long life and easy maintenance.
10 and 30 cu. in.: .25, .5, 1, 1.5, 2.5, 3, 4 and 5 gallon sizes.
10 and 30 cu. in.: .25, .5, 1, 1.5, 2.5, 3, 4 and 5 gallon sizes.