+7 (812) 645-08-06
Hydraulic accumulators
select brand
Hydraulic tank compensator
Pressure compensator VGD
Pressure compensator with storage vessel including pressure gauge and safety valve
Possibility of cooling the seal liquid using a cooling jacket (water jacket)
For pressures up to 40...
Pressure compensator with storage vessel including pressure gauge and safety valve
Possibility of cooling the seal liquid using a cooling jacket (water jacket)
For pressures up to 40...
Hydraulic tank compensator
Pressure compensator VGD
Pressure compensator with storage vessel including pressure gauge and safety valve
Possibility of cooling the seal liquid using a cooling jacket (water jacket)
For pressures up to 40 bar (abs.) - volume 0.3 liters
Monitoring the liquid level using a proximity switch - ATEX Zone 1
Pressure compensator VD120
Pressure compensator for high-pressure seals
For pressures up to 70 bar (abs.) - volume 0.8 liters
Suitable for pressures up to 100 bar in combination with pressure splitting device VD120PS
Proximity switch for monitoring the liquid level
Pressure compensator for high pressure VDH
Installation "above head height" for automatic ventilation
Volume 0.8 liters
Magnetic roller display for monitoring the liquid level and automatic refilling
Pressure range: up to 100 bar (abs.)
Pressure compensator with storage vessel including pressure gauge and safety valve
Possibility of cooling the seal liquid using a cooling jacket (water jacket)
For pressures up to 40 bar (abs.) - volume 0.3 liters
Monitoring the liquid level using a proximity switch - ATEX Zone 1
Pressure compensator VD120
Pressure compensator for high-pressure seals
For pressures up to 70 bar (abs.) - volume 0.8 liters
Suitable for pressures up to 100 bar in combination with pressure splitting device VD120PS
Proximity switch for monitoring the liquid level
Pressure compensator for high pressure VDH
Installation "above head height" for automatic ventilation
Volume 0.8 liters
Magnetic roller display for monitoring the liquid level and automatic refilling
Pressure range: up to 100 bar (abs.)
Hydraulic accumulator - 1/8", 5 000 psi
SPX accumulators have been developed for storing small supply of pressurized oil. They are suitable for palletized workholding systems or other such systems with temporary disconnection of supply pressure. The nitrogen-charged accumulators...
Hydraulic accumulator - 1/8", 5 000 psi
SPX accumulators have been developed for storing small supply of pressurized oil. They are suitable for palletized workholding systems or other such systems with temporary disconnection of supply pressure. The nitrogen-charged accumulators are piston-type and thus can be fixed in any orientation.
Compared to other accumulators within its class, these accumulators have the broadest operating range at any single charge pressure. Based on the application, they are suitable for use at all pressures in the range of 0 to 5,000 psi. Factory setting of charge pressure is 1,500 psi, which is increasable up to 2,000 psi. As a general rule, more total oil is provided by a lower charge pressure, but a higher charge pressure provides more usable oil at any permissible pressure drop. Customers should refer to the performance charts for finding out the best charge pressure for different applications.
Compared to other accumulators within its class, these accumulators have the broadest operating range at any single charge pressure. Based on the application, they are suitable for use at all pressures in the range of 0 to 5,000 psi. Factory setting of charge pressure is 1,500 psi, which is increasable up to 2,000 psi. As a general rule, more total oil is provided by a lower charge pressure, but a higher charge pressure provides more usable oil at any permissible pressure drop. Customers should refer to the performance charts for finding out the best charge pressure for different applications.
Stand-alone cooling system / for hydraulic systems - RID Series
The RID is a series of autonomous cooling units manufactured by Emmegi Heat-Exhanger. Equipped with...
Stand-alone cooling system / for hydraulic systems - RID Series
The RID is a series of autonomous cooling units manufactured by Emmegi Heat-Exhanger. Equipped with an aluminium core and a screw pump, it has the ability to deliver a working pressure of 6 bar and accommodate a capacity of 0,6Kw.
In addition, it is specifically used for conditions that do not allow the exchanger to be configured on the hydraulic circuit return line.
In addition, it is specifically used for conditions that do not allow the exchanger to be configured on the hydraulic circuit return line.
Stand-alone cooling system / for hydraulic systems - SILENT EVO2
The SILENT EVO2 are used in circuits wherein an exchanger cannot be installed...
Stand-alone cooling system / for hydraulic systems - SILENT EVO2
The SILENT EVO2 are used in circuits wherein an exchanger cannot be installed on a hydraulic circuit which can cause a return in the line due to hammering and high differential flows in the circuit. The simplicity of this installation allows heat and filtration problems to be carried out easily.