+7 (812) 645-08-06
Battery chargers: lead-acid, Ni-Cd, Ni-MH, Li-ion
select brand
Battery charger for railway applications - TUV, CE, ISO
The EVEREXCEED uXcel Ultra Series single-phase/three-phase chargers feature modules that are easily replaced, and are redundant/parallel, guaranteeing durability and...
Battery charger for railway applications - TUV, CE, ISO
The EVEREXCEED uXcel Ultra Series single-phase/three-phase chargers feature modules that are easily replaced, and are redundant/parallel, guaranteeing durability and reliability. They are available in hot pluggable switch-mode or SCR phase controlled mode, and incorporate the latest battery management technologies. They feature a modular double charger, parallel operation mode, SCR full-bridge rectifiers, a RS485 network interface, and contain a IP 65 external protection, offering robustness and minimal need for serviceability. They are easy to install, contain user-friendly controls, and offer better performance than similar chargers of their class.
Battery charger - TUV, CE, ISO, 24 - 200 V
The EverExceed uXcel series battery chargers/rectifier combine the robustness of phase-controlled circuitry with programmability of the latest micro-processor technology to offer an advanced, flexible, easy to use,...
Battery charger - TUV, CE, ISO, 24 - 200 V
The EverExceed uXcel series battery chargers/rectifier combine the robustness of phase-controlled circuitry with programmability of the latest micro-processor technology to offer an advanced, flexible, easy to use, ultra-reliable battery charger which is ideal for use in industrial and military applications. Available in single phase and three phase- 6 pulse and 12 pulse- up to 100 kW, the MCR series battery chargers are ideal for applications such as substation DC supplies, switch/tripping power supplies, PLC backup supply, emergency lighting and lube oil pump backup supplies. Features SCR full-bridge rectifiers, a fast acting fuse giving up to IP65 external protection, a wide voltage and current range, as well as a battery management system. Features a rugged and hard wearing design, and has been engineered with longevity in mind.
Battery charger - TUV, CE, ISO | SCR 2450T - SCR 80100T
The EverExceed chargers of the SCR-T series feature a microprocessor control of the charge cycle and represent an excellent solution for charging the flooded traction batteries....
Battery charger - TUV, CE, ISO | SCR 2450T - SCR 80100T
The EverExceed chargers of the SCR-T series feature a microprocessor control of the charge cycle and represent an excellent solution for charging the flooded traction batteries. This intelligent automatic charger unit is a product of several decades of charging experience and meets or exceeds the needs of modern motive power batteries. These models are built according to strict specifications and requirements in order to form a coordinated system with modern power batteries, allowing optimal and economical use. The SCR-T series features a charge time from 8 to 12 hours and is capable of normal charging, automatic charge equalization and is suited for single and multi shifts.
Battery charger - TUV, CE, ISO, 12 - 72 V
The EverExceed CHF stationary charger series comprising industrial float chargers has been designed to automatically control the charging rates found in a wide range of battery types. In addition to this,...
Battery charger - TUV, CE, ISO, 12 - 72 V
The EverExceed CHF stationary charger series comprising industrial float chargers has been designed to automatically control the charging rates found in a wide range of battery types. In addition to this, the chargers also provide full rated output and both voltage regulation and current limiting are controlled through the use of solid state integrated circuity, ensuring optimum performance in the most compact design.
These units are suitable for utility, communications and similar charger applications, and feature an LED state of charge display, with 80% and 100% charge levels plus faults displayed. The chargers utilize an autostart function and automatically start or stop when the power source is connected or removed. This unit supports both battery power sources and wall outlet power sources.
These units are suitable for utility, communications and similar charger applications, and feature an LED state of charge display, with 80% and 100% charge levels plus faults displayed. The chargers utilize an autostart function and automatically start or stop when the power source is connected or removed. This unit supports both battery power sources and wall outlet power sources.
Battery charger for railway applications - 100W - 1500W
Absopulse’s BCH 1K5T-400 battery charger uses high-frequency conversion technology to deliver up to 1500W continuous output power. It was designed to charge a 400V lithium-ion battery; other battery configurations are also available. It has an automatic two step charge mode: it runs at full 4A charging current until the pre-set voltage threshold of 380V is reached, then switches to a lower 1A...
Battery charger for railway applications - 100W - 1500W
Absopulse’s BCH 1K5T-400 battery charger uses high-frequency conversion technology to deliver up to 1500W continuous output power. It was designed to charge a 400V lithium-ion battery; other battery configurations are also available. It has an automatic two step charge mode: it runs at full 4A charging current until the pre-set voltage threshold of 380V is reached, then switches to a lower 1A...
Battery charger for railway applications - 2500W
Rectifier/Battery Charger for 120V Batteries in heavy-duty industrial environments - industrial plants, power stations, electric utility vehicles, transportation. Power levels higher than 2500W available.
The BCH 2K5-120NP-EQ rugged, industrial quality battery charger delivers up to 2500W continuous output power. It accepts an input voltage of 190V to 264Vac; in float-mode, it...
Battery charger for railway applications - 2500W
Rectifier/Battery Charger for 120V Batteries in heavy-duty industrial environments - industrial plants, power stations, electric utility vehicles, transportation. Power levels higher than 2500W available.
The BCH 2K5-120NP-EQ rugged, industrial quality battery charger delivers up to 2500W continuous output power. It accepts an input voltage of 190V to 264Vac; in float-mode, it provides 135Vdc/16A for charging a 120V (60 cell) battery. Other input/output values available on request.
This charger has a manually initiated equalize cycle. Activated by a push-button “EQ/ON”, the equalize function elevates the output voltage to 141Vdc for the battery. The equalize time is controlled by a built-in timer, adjustable in the 1-9 hour range. This mode can be manually de-activated at any time.
The BCH 2K5-120NP-EQ is rated for heavy-duty applications: -40oC to +70oC temperature for full specification. Cooling is by convection via louvers on the cabinet. The absence of fans, low component count and the use of components with established reliability result in a high MTBF. The robust chassis was designed for wall-mounted application.
This charger is constructed with internal modules, connected in parallel, which also provide inherent redundancy: the failure of one module would only cause a minor loss in output power. Protection for this charger includes input inrush current limiting, over-voltage protection, short circuit protection & a self-resetting thermostat for thermal protection. Optional Charger Fail Alarm (Form C) indicates loss of AC input power.
Absopulse offers an extensive range heavy-duty battery chargers – please visit the company website for more information.
The BCH 2K5-120NP-EQ rugged, industrial quality battery charger delivers up to 2500W continuous output power. It accepts an input voltage of 190V to 264Vac; in float-mode, it provides 135Vdc/16A for charging a 120V (60 cell) battery. Other input/output values available on request.
This charger has a manually initiated equalize cycle. Activated by a push-button “EQ/ON”, the equalize function elevates the output voltage to 141Vdc for the battery. The equalize time is controlled by a built-in timer, adjustable in the 1-9 hour range. This mode can be manually de-activated at any time.
The BCH 2K5-120NP-EQ is rated for heavy-duty applications: -40oC to +70oC temperature for full specification. Cooling is by convection via louvers on the cabinet. The absence of fans, low component count and the use of components with established reliability result in a high MTBF. The robust chassis was designed for wall-mounted application.
This charger is constructed with internal modules, connected in parallel, which also provide inherent redundancy: the failure of one module would only cause a minor loss in output power. Protection for this charger includes input inrush current limiting, over-voltage protection, short circuit protection & a self-resetting thermostat for thermal protection. Optional Charger Fail Alarm (Form C) indicates loss of AC input power.
Absopulse offers an extensive range heavy-duty battery chargers – please visit the company website for more information.
On-board battery charger - 1000W
1000W, On-Board Battery Charger for Vehicles in Cold Climates (different power levels available).
The BCP 1K-27CB Series rugged industrial quality battery charger specifically designed to assist vehicle warm-up during extremely cold weather. Typically permanently installed on a vehicle, this charger is activated on days when the ambient temperature drops below 0ºC.
This...
The BCP 1K-27CB Series rugged industrial quality battery charger specifically designed to assist vehicle warm-up during extremely cold weather. Typically permanently installed on a vehicle, this charger is activated on days when the ambient temperature drops below 0ºC.
This...
On-board battery charger - 1000W
1000W, On-Board Battery Charger for Vehicles in Cold Climates (different power levels available).
The BCP 1K-27CB Series rugged industrial quality battery charger specifically designed to assist vehicle warm-up during extremely cold weather. Typically permanently installed on a vehicle, this charger is activated on days when the ambient temperature drops below 0ºC.
This...
The BCP 1K-27CB Series rugged industrial quality battery charger specifically designed to assist vehicle warm-up during extremely cold weather. Typically permanently installed on a vehicle, this charger is activated on days when the ambient temperature drops below 0ºC.
This...
Battery charger with power factor correction (PFC) input
Absopulse Electronics’ BCP 150 Series is a rugged, industrial quality battery charger. It provides 150W total power for the output and for float charging the external battery. Standard single output float voltage options include 13.8Vdc, 27.6Vdc or 55.2Vdc. The unit accepts a 95-264Vac universal input (47-63Hz) with power factor correction to meet EN61000-3-2. Custom input and output...
Battery charger with power factor correction (PFC) input
Absopulse Electronics’ BCP 150 Series is a rugged, industrial quality battery charger. It provides 150W total power for the output and for float charging the external battery. Standard single output float voltage options include 13.8Vdc, 27.6Vdc or 55.2Vdc. The unit accepts a 95-264Vac universal input (47-63Hz) with power factor correction to meet EN61000-3-2. Custom input and output options are available on request.
The BCP 150 has a low battery disconnect circuit to prevent damage to the battery by low discharge during prolonged AC failure. The battery input is also protected against accidental reverse battery connection by a crossbar diode and internal safety fuse. It has an AC/Charger Fail Alarm to indicate either failure of the charger circuit or loss of AC input power. A charger ‘ON’ LED indicator is located beside the terminal block.
Cooling is via baseplate to a heatsinking surface and by natural convection, and the unit is rated for operation over a 0 oC to +50oC cold plate temperature for full specification. An extended temperature range is available on request.
The charger is ruggedized to meet IEC61373 Cat 1 A&B requirements as a minimum, with heavy ruggedizing and conformal coating available for operation in extreme environments. It is fully protected and meets EN 60950-1 and related standards. Low component count, large design headroom, and the use of components with established reliability result in a high MTBF.
Absopulse offers an extensive range heavy-duty battery chargers – please visit the company website for more information.
The BCP 150 has a low battery disconnect circuit to prevent damage to the battery by low discharge during prolonged AC failure. The battery input is also protected against accidental reverse battery connection by a crossbar diode and internal safety fuse. It has an AC/Charger Fail Alarm to indicate either failure of the charger circuit or loss of AC input power. A charger ‘ON’ LED indicator is located beside the terminal block.
Cooling is via baseplate to a heatsinking surface and by natural convection, and the unit is rated for operation over a 0 oC to +50oC cold plate temperature for full specification. An extended temperature range is available on request.
The charger is ruggedized to meet IEC61373 Cat 1 A&B requirements as a minimum, with heavy ruggedizing and conformal coating available for operation in extreme environments. It is fully protected and meets EN 60950-1 and related standards. Low component count, large design headroom, and the use of components with established reliability result in a high MTBF.
Absopulse offers an extensive range heavy-duty battery chargers – please visit the company website for more information.
Switch-mode battery charger / Ni-MH / handheld
Heavy-duty, Switch-mode, Portable Charger for 100Ah/12V NiMH Batteries
- Universal ac-input range
- PFC-input stage
- Cooling by natural convection - no fans required
- Housed in a splash-proof Pelican top loader case with a sturdy handle
- Suitable for applications where manual initiation of a charge cycle required
- Suitable for Railway & Industrial...
- Universal ac-input range
- PFC-input stage
- Cooling by natural convection - no fans required
- Housed in a splash-proof Pelican top loader case with a sturdy handle
- Suitable for applications where manual initiation of a charge cycle required
- Suitable for Railway & Industrial...
Switch-mode battery charger / Ni-MH / handheld
Heavy-duty, Switch-mode, Portable Charger for 100Ah/12V NiMH Batteries
- Universal ac-input range
- PFC-input stage
- Cooling by natural convection - no fans required
- Housed in a splash-proof Pelican top loader case with a sturdy handle
- Suitable for applications where manual initiation of a charge cycle required
- Suitable for Railway & Industrial Environments
Battery voltage and temperature are monitored during the charge cycle. The battery temperature is monitored by an external sensor, which is connected to the charger via a 2-pole circular connector. The charging process is terminated when either the battery voltage reaches 13.5V or the battery temperature exceeds a predetermined temperature, at which point the charger disconnects from the battery via the contacts. For safety reasons, the circuit will not re-initiate automatically, even in case of input power re-cycling it must be initiated manually. Disconnect values can be made customer-specific.
A breaker and an internal crowbar diode on the charger output protect against reverse connection of the battery to the charger. Full electronic protection minimizes the possibility of failure due to abnormal operating conditions. The BCP 130-PEL complies with EN/UL60950-1 and equivalent industrial safety standards as well as the EN61000-3-2 directive for low input harmonic distortion. The unit is filtered to meet EN55022 Class A EMI standards with margins.
All printed circuits are conformal coated and heavily ruggedized for immunity to shock, vibration and moisture.
Custom options, versions with higher output power and versions for different battery chemistries and voltages, are also available.
- Universal ac-input range
- PFC-input stage
- Cooling by natural convection - no fans required
- Housed in a splash-proof Pelican top loader case with a sturdy handle
- Suitable for applications where manual initiation of a charge cycle required
- Suitable for Railway & Industrial Environments
Battery voltage and temperature are monitored during the charge cycle. The battery temperature is monitored by an external sensor, which is connected to the charger via a 2-pole circular connector. The charging process is terminated when either the battery voltage reaches 13.5V or the battery temperature exceeds a predetermined temperature, at which point the charger disconnects from the battery via the contacts. For safety reasons, the circuit will not re-initiate automatically, even in case of input power re-cycling it must be initiated manually. Disconnect values can be made customer-specific.
A breaker and an internal crowbar diode on the charger output protect against reverse connection of the battery to the charger. Full electronic protection minimizes the possibility of failure due to abnormal operating conditions. The BCP 130-PEL complies with EN/UL60950-1 and equivalent industrial safety standards as well as the EN61000-3-2 directive for low input harmonic distortion. The unit is filtered to meet EN55022 Class A EMI standards with margins.
All printed circuits are conformal coated and heavily ruggedized for immunity to shock, vibration and moisture.
Custom options, versions with higher output power and versions for different battery chemistries and voltages, are also available.
Lithium-ion battery charger - 1.7 - 8.5 A | 2840LI
3-step charge control with current
detection as charge termination
Switch mode charger
...
detection as charge termination
Switch mode charger
...
Lithium-ion battery charger - 1.7 - 8.5 A | 2840LI
3-step charge control with current
detection as charge termination
Switch mode charger
Charging 1-14 Li-Ion battery cells
Medical certificate (EN 60601)
pending
3-colored LED indicator
2-pin IEC 320 input connector
Mains cord not included
Waterproof (IP67) version available
Custom specifications on request
detection as charge termination
Switch mode charger
Charging 1-14 Li-Ion battery cells
Medical certificate (EN 60601)
pending
3-colored LED indicator
2-pin IEC 320 input connector
Mains cord not included
Waterproof (IP67) version available
Custom specifications on request
Ni-MH battery charger - 45 W, 1.2 - 3.5 A | 2015
AC/DC switch mode fast charger
CPM-Computer Programmable
Microprocessor offering:
- Charge detection...
CPM-Computer Programmable
Microprocessor offering:
- Charge detection...
Ni-MH battery charger - 45 W, 1.2 - 3.5 A | 2015
AC/DC switch mode fast charger
CPM-Computer Programmable
Microprocessor offering:
- Charge detection options (one or more):
- dV, dT/dt, 0 dV, Timer
- Safety timer, dV threshold, and
temperature gradient adjustment
Available in 120V version
Custom specifications on request
Exchangeable DC plugs
Approvals:
- Medically certified (EN 60601)
- UL approved (UL 60601-1)
- For updates: see www.mascot.no
CPM-Computer Programmable
Microprocessor offering:
- Charge detection options (one or more):
- dV, dT/dt, 0 dV, Timer
- Safety timer, dV threshold, and
temperature gradient adjustment
Available in 120V version
Custom specifications on request
Exchangeable DC plugs
Approvals:
- Medically certified (EN 60601)
- UL approved (UL 60601-1)
- For updates: see www.mascot.no
Lead–acid battery charger - 2.7 A, 6 - 36 V | 9640
3-step charge control with timer
Charge current not affected by
fluctuations in mains...
Charge current not affected by
fluctuations in mains...
Lead–acid battery charger - 2.7 A, 6 - 36 V | 9640
3-step charge control with timer
Charge current not affected by
fluctuations in mains voltage
Protected against reversed polarity
LED-indicator with three
different colors
Avail. in UL-approved
120 V version (9641)
Exchangeable DC plugs
Approvals:
- Medically certified
(EN 60601) (9641)
- For updates: see www.mascot.no
Charge current not affected by
fluctuations in mains voltage
Protected against reversed polarity
LED-indicator with three
different colors
Avail. in UL-approved
120 V version (9641)
Exchangeable DC plugs
Approvals:
- Medically certified
(EN 60601) (9641)
- For updates: see www.mascot.no
Lithium-ion battery charger - 0.35 - 1 A | 2740LI
3-step charge control with current
detection as charge termination
Universal...
detection as charge termination
Universal...
Lithium-ion battery charger - 0.35 - 1 A | 2740LI
3-step charge control with current
detection as charge termination
Universal input voltage
(90-264 VAC)
Charging 1-7 battery cells
LED indicator with two colors
Custom specifications on request
Approvals:
- Complies w. medical std
EN 60601
- For updates: see www.mascot.no
detection as charge termination
Universal input voltage
(90-264 VAC)
Charging 1-7 battery cells
LED indicator with two colors
Custom specifications on request
Approvals:
- Complies w. medical std
EN 60601
- For updates: see www.mascot.no
Lithium-ion battery charger - 0.56 - 1.3 A | 2240 LI
3-step charge control with current
detection as charge termination
Universal input voltage (90-264...
detection as charge termination
Universal input voltage (90-264...
Lithium-ion battery charger - 0.56 - 1.3 A | 2240 LI
3-step charge control with current
detection as charge termination
Universal input voltage (90-264 VAC)
Charging 1-7 battery cells
Mounting bracket available
Order mains cord separately
Waterproof (IP67) version available
Exchangable AC and DC plugs
Custom specifications on request
Approvals:
- Medically certified (EN 60601)
- For updates: see www.mascot.no
detection as charge termination
Universal input voltage (90-264 VAC)
Charging 1-7 battery cells
Mounting bracket available
Order mains cord separately
Waterproof (IP67) version available
Exchangable AC and DC plugs
Custom specifications on request
Approvals:
- Medically certified (EN 60601)
- For updates: see www.mascot.no