+7 (812) 645-08-06
Workshop tools and mounts for optics
select brand
SEM sample holder / for scanning electron microscopes
These micro tool sample holders from Phenom World provide clamping services that are fast and simple. They are designed...
SEM sample holder / for scanning electron microscopes
These micro tool sample holders from Phenom World provide clamping services that are fast and simple. They are designed with support for tilts and rotations that permit the operator to simply position the unit when sampling and to choose the image coatings and cutting angles. Also, these units no longer require additional tooling whenever a sample is being loaded. Moreover, the samples do not need to be configured prior to the use with this device.
Scanning electron microscope sample holder / metallurgical / SEM
These sample holders from Phenom World eradicates the need to prepare additional non-conductive samples....
Scanning electron microscope sample holder / metallurgical / SEM
These sample holders from Phenom World eradicates the need to prepare additional non-conductive samples. This makes the sampling process fast and easy. These devices are capable of magnifying up to 8 times more than the standard sample holder. Also, they have been able to drastically trim down the sputter-coating requirements, which eliminates the need for additional equipment during sample preparation.
Scanning electron microscope sample holder / SEM
The sample holder in this series comes in a design that allows it to reduce simple charging and eliminate extra sample preparation of non-conductive samples. The imaging samples include...
Scanning electron microscope sample holder / SEM
The sample holder in this series comes in a design that allows it to reduce simple charging and eliminate extra sample preparation of non-conductive samples. The imaging samples include polymers, organic materials, paper, ceramics, coatings and glass, becoming trouble-free and fast.
There are several key specifications, including the magnification that is eight times higher than in the case of other products before charging is visible. The need for sputter coating can be reduced dramatically, resulting in no additional equipment, as well as faster sample preparation. Finally, the non conductive samples can also be imaged in their natural state, providing valuable material contrast information.
There are several key specifications, including the magnification that is eight times higher than in the case of other products before charging is visible. The need for sputter coating can be reduced dramatically, resulting in no additional equipment, as well as faster sample preparation. Finally, the non conductive samples can also be imaged in their natural state, providing valuable material contrast information.
Mirror holder - OMHS-B series
The OMHS-B series, manufactured by Zolix, is a precision center mirror mount that...
Mirror holder - OMHS-B series
The OMHS-B series, manufactured by Zolix, is a precision center mirror mount that has a 12.7 up to 50.8 diameter and a 3-knob adjustment. It has an open type construction wherein the lens are may be loaded quickly. It has mounting holes on either direction. Furthermore, it has a PTFE gasket for optimum protection of the lens.
Mirror holder - OMHS series
The OHMS Precision Center Mirror Mount is developed by Zonix. The product has...
Mirror holder - OMHS series
The OHMS Precision Center Mirror Mount is developed by Zonix. The product has...
Mirror holder - OMHS-S series
The Precision Center Mirror Mount of the OMHS-S Series is designed with a fixed tube...
Mirror holder - OMHS-S series
The Precision Center Mirror Mount of the OMHS-S Series is designed with a fixed tube lens ring card that can be assembled and attached to the lens mount. It features a PTFE seal that protects the lens. This mirror holder is designed with 3 locking knob adjustment with self-locking mechanism. It is 12.7 mm to 50.8 mm in diameter.
Mirror holder - OMHS-LBE22/WJ/C
The OHMS series are precision center mirror mounts with beam expanders,lens, C-mount and three locking knob adjustments....
Mirror holder - OMHS-LBE22/WJ/C
The OHMS series are precision center mirror mounts with beam expanders,lens, C-mount and three locking knob adjustments. Their constructer is similar to the OMHS series with added horizontal adjustment with light axis. The OMHS-LBE22 can equip laser beam expander with an M22X0.75 interface, OMHS-WJ can install microscopy objectives with 4/5"-1/36" interface, OMHS-CMount installs C interface machines in CCD+ with 1"-1/32" interface.
Steel rail carrier for optics - RACA
The device comes with dovetail construction and offers convenient adjustment. It also provides...
Steel rail carrier for optics - RACA
The device comes with dovetail construction and offers convenient adjustment. It also provides good repeatability and comes with handwheel of plastic connectors that are steel locked. It also does not damage the mounts. The product comes with various rail mount widths to suit the purpose. It is suitable for different travels. It offers high precision accuracy.
Self-centering lens-holder - 830 series
The model 830-0010 and model 830-0020 self-centring lens mounts reliably centre and safely hold round optics and cylindrical components. Holding by three rods with V-groove tips provide...
Self-centering lens-holder - 830 series
The model 830-0010 and model 830-0020 self-centring lens mounts reliably centre and safely hold round optics and cylindrical components. Holding by three rods with V-groove tips provide easy and secure optics accommodation with high relocation repeatability.
Model 830-0010 and 830-0020 mounts may be attached to series 820-0010 standard rods and then with series 820-0050 rod holders or series 820-0040 rod translators be located on the table. Alternatively, sets of riser blocks and movable bases provide a selection of convenient, various axes height and direct location to table.
Model 830-0010 accommodates optics up to 40 mm and model 830-0020 up to 60 mm in diameter.
Finish: black anodized aluminium.
Model 830-0010 and 830-0020 mounts may be attached to series 820-0010 standard rods and then with series 820-0050 rod holders or series 820-0040 rod translators be located on the table. Alternatively, sets of riser blocks and movable bases provide a selection of convenient, various axes height and direct location to table.
Model 830-0010 accommodates optics up to 40 mm and model 830-0020 up to 60 mm in diameter.
Finish: black anodized aluminium.
Self-centering lens-holder - ø 115 - 200 mm | 840-0006
Large Optical Mount 840-0006 is designed for...
Self-centering lens-holder - ø 115 - 200 mm | 840-0006
Large Optical Mount 840-0006 is designed for large and heavy transmission optics.
* Optics diameter 115-200 mm
* Optics thickness 52 mm
* Load capacity 6 kg
* Optics diameter 115-200 mm
* Optics thickness 52 mm
* Load capacity 6 kg