+7 (812) 645-08-06
Workshop tools and mounts for optics
select brand
OIM interface module / optical - 5 - 28 V
The optical isolator interface is intended for use between a sensor and a receiving electronic device. This delivers an ideal solution for systems struggling with grounding problems, noise and/or poor...
OIM interface module / optical - 5 - 28 V
The optical isolator interface is intended for use between a sensor and a receiving electronic device. This delivers an ideal solution for systems struggling with grounding problems, noise and/or poor signal compatibility. Providing this kind of clean interface allows for the optical isolator to be used for eliminating ground loops and for the distribution of a sensor signal to a variety of input devices. It can also act as a repeater and help reduce signal degradation from a long cable run.
Differential or single-ended inputs are accepted by the interface and all standard operating voltages in the 5 to 28VDC range are accommodated. A maximum of eight optical isolator modules can be chained together to enable multiple outputs simultaneously to PLCs or controllers.
Differential or single-ended inputs are accepted by the interface and all standard operating voltages in the 5 to 28VDC range are accommodated. A maximum of eight optical isolator modules can be chained together to enable multiple outputs simultaneously to PLCs or controllers.
Optical etalon
REO makes strong components that are useful for managing optical path lengths in coated optic units. This is made with a tight tolerance...
Optical etalon
REO makes strong components that are useful for managing optical path lengths in coated optic units. This is made with a tight tolerance level to make it work to create strong cavities and etalons to use in many forms. These can be made with solid etalons to use in WDM telecommunications connections. This works for many laser stabilization and frequency plans and can be used in cases where a path length control setup has to be used. This is also great for strong thermal stability rates while working on frequency standards in general.
Splice enclosure / fiber optic - SCF
The Corning Splice Closure (SCF) with Mechanical End Cap is suitable for splicing...
Splice enclosure / fiber optic - SCF
The Corning Splice Closure (SCF) with Mechanical End Cap is suitable for splicing fibers in aerial, duct and buried applications. These extraordinary device can be purchased in configurations that can take hold of 72 up to 576 single fiber splices or from a 288- to 1296-fiber capacity if splicing ribbons.