Multifunction calibrators, other calibrators

select brand


B&K Precision

Acoustic calibrator - 94 - 114 dB | CAL73

The CAL73 high accuracy and user-friendly sound level calibrator can be used with a wide range of...

Acoustic calibrator - 94 - 114 dB | CAL73

The CAL73 high accuracy and user-friendly sound level calibrator can be used with a wide range of sound measuring equipment and is equipped with a 1/2 inch adapter allowing it to perform calibrations on both 1 inch diameter microphones and 1/2 inch microphones. It is designed according to IEC 60942 (2003) Class 2, ANSI SI.40-1984 and provides calibration for 94 dB and 114 dB at 1 KHz.
TESTO

Pressure calibrator / for mobile applications / industrial / laboratory - 100 Pa, ± 0.1 - 0.3 % | Pneumator

In industrial environments, the precision of the measurement technology used is critical. This is especially important where the accuracy of the measuring...

Pressure calibrator / for mobile applications / industrial / laboratory - 100 Pa, ± 0.1 - 0.3 % | Pneumator

In industrial environments, the precision of the measurement technology used is critical. This is especially important where the accuracy of the measuring instruments is tested: in calibration. However, not all pressure or differential pressure calibrations can be carried out in a laboratory when the equipment is permanently installed. The Pneumator can be used not only for stationary applications (in a laboratory), but also as a mobile calibrator. Additionally, it can serve as a precision measuring instrument on site, combining highest accuracy with reliable battery operation.

Humidity calibrator - 5 - 95 %rH, max. 40 °C | Huminator

Testo Huminator, humidity generator, is one of the most compact climate chambers in the market. This makes it an ideal choice for both mobile and stationary devices. The desktop instrument can test the performance of all material types,...

Humidity calibrator - 5 - 95 %rH, max. 40 °C | Huminator

Testo Huminator, humidity generator, is one of the most compact climate chambers in the market. This makes it an ideal choice for both mobile and stationary devices. The desktop instrument can test the performance of all material types,...
Mettler Toledo, Process Analytics AG

Automatic calibrator / with automatic probe cleaning - EasyClean100

EasyClean100 is designed to clean sensors installed in immersion housings. A spray head is specially designed...

Automatic calibrator / with automatic probe cleaning - EasyClean100

EasyClean100 is designed to clean sensors installed in immersion housings. A spray head is specially designed to divert a stream of flushing water or compressed air towards the sensor's sensing end.

The sensor's effective under water cleaning is ensured by the assembly configuration. Air bubbles around the sensor-tip clean and sweep away the deposits on the sensor's sensitive areas using the cavitation effect.

Automatic calibrator / with automatic probe cleaning - EasyClean150

The EasyClean150 will save you a lot of money because of its built in automatic flushing sensors...

Automatic calibrator / with automatic probe cleaning - EasyClean150

The EasyClean150 will save you a lot of money because of its built in automatic flushing sensors located in retractable housing that can be placed externally. This intelligent system regulates the housing's mobility together with the flushing feature of the sensor. This device is highly recommended for operations where ample water is the primary element for cleaning.

Automatic calibrator / with automatic probe cleaning - EasyClean200e

The cleaning phase can either be activated by the rinse contact of the transmitter or discharged...

Automatic calibrator / with automatic probe cleaning - EasyClean200e

The cleaning phase can either be activated by the rinse contact of the transmitter or discharged physically at the EasyClean control part as preferred. An incorporated pump system nourishes the onslaught fluid at arranged concentration to the washing out compartment of the retractable board. EasyClean200e marks firm partition of the electronics from all damp parts.
{{item.name}}