+7 (812) 645-08-06
Radar level sensors
select brand
Radar level sensor / for bulk materials - max. 30 m, -1 ... +100 bar | VEGAPULS SR 68
The VEGAPULS SR 68 is a radar detector for incessant measurement of mass solids even under tricky process situations. It is mostly...
Radar level sensor / for bulk materials - max. 30 m, -1 ... +100 bar | VEGAPULS SR 68
The VEGAPULS SR 68 is a radar detector for incessant measurement of mass solids even under tricky process situations. It is mostly appropriate for height measurement in elevated silos and huge bunkers. The VEGAPULS SR 68 is an inexpensive solution due to the easy setup and the dependable, preservation-free function. Advantages include non-touch measurement, high plant accessibility, because it is wear and maintenance-free and has dependable measurement which is independent of steam, dirt and sound.
TDR guided wave radar level sensor - max. 32 m, -1 ... +40 bar | VEGAFLEX 61
The VEGAFLEX 61 by VEGA is designed and develop as TDR sensor to provide continuous level measurement of liquids and light-weight bulk solids. Durable...
TDR guided wave radar level sensor - max. 32 m, -1 ... +40 bar | VEGAFLEX 61
The VEGAFLEX 61 by VEGA is designed and develop as TDR sensor to provide continuous level measurement of liquids and light-weight bulk solids. Durable and highly efficient, the VEGAFLEX 61 is not easily affected by outside elements like dust, vapour, buildup and condensation. The sensor is integrated with state-of-the-art electronics to ensure precise and reliable measured values. Low cost of maintenance and installation with no additional equipment needed. It can be incorporated with either a cable that provides a range of up to 32 m and rod of up to 4 m. It has a measuring accuracy of +/- 3 mm.
TDR guided wave radar level sensor - max. 60 m, -1 ... +40 bar | VEGAFLEX 62
VEGAFLEX 62 is a sensor that is primarily defined by its robustness, as well as suitability for measurement of liquids and heavy bulk...
TDR guided wave radar level sensor - max. 60 m, -1 ... +40 bar | VEGAFLEX 62
VEGAFLEX 62 is a sensor that is primarily defined by its robustness, as well as suitability for measurement of liquids and heavy bulk solids. It is independent of ambient influences, including vapor, buildup, dust and condensation, and can deliver reliable and precise measured valves.
There are numerous advantages to using it, including low cost expenditure and minimum time due to the simple, medium-less setup. The instrument selection is simple, while the low maintenance costs are possible because of the design.
There are numerous advantages to using it, including low cost expenditure and minimum time due to the simple, medium-less setup. The instrument selection is simple, while the low maintenance costs are possible because of the design.
TDR guided wave radar level sensor - max. 32 m, -0.5 ... +16 bar | VEGAFLEX 63
VEGAFLEX 63 is a level sensor that is suitable for various industry applications that involve working with liquids. In addition to this, the surface is gap-free, highly resistant...
TDR guided wave radar level sensor - max. 32 m, -0.5 ... +16 bar | VEGAFLEX 63
VEGAFLEX 63 is a level sensor that is suitable for various industry applications that involve working with liquids. In addition to this, the surface is gap-free, highly resistant and smooth, making the product ideal for corrosive liquids and even aggressive ones. The item is also perfect for applications for which hygiene is an absolute requirement.
If users are looking for precise measured values, and independence from environmental influences, this is also the right product. Note that the cost expenditure and time are minimal because of the easy setup, while the maximum chemical resistance and ability to clean make the item more reliable. The instrument selection is also a simple process.
If users are looking for precise measured values, and independence from environmental influences, this is also the right product. Note that the cost expenditure and time are minimal because of the easy setup, while the maximum chemical resistance and ability to clean make the item more reliable. The instrument selection is also a simple process.
TDR guided wave radar level sensor - max. 6 m, -1 ... +40 bar | VEGAFLEX 65
VEGAFLEX 65 is a high-quality sensor, suitable for various applications that involve working with liquids. The main applications it can be used with include measurement...
TDR guided wave radar level sensor - max. 6 m, -1 ... +40 bar | VEGAFLEX 65
VEGAFLEX 65 is a high-quality sensor, suitable for various applications that involve working with liquids. The main applications it can be used with include measurement of solvents, and low viscosity liquids and fluids. For these aspects, the sensor will always deliver precise values.
As for the advantages of using it, the cost expenditure and minimum time are due to the simple setup without medium, while instrument selection is simple, due to the unaffected product features. There are various individual mounting options available, mainly because measurement is possible independent of vessel and socket installations.
As for the advantages of using it, the cost expenditure and minimum time are due to the simple setup without medium, while instrument selection is simple, due to the unaffected product features. There are various individual mounting options available, mainly because measurement is possible independent of vessel and socket installations.
TDR guided wave radar level sensor / for liquids / 2-wire - max. 131 ft | DR2000
This device is a TDR Level Meter for measuring distance, level, volume and mass. Its modular design makes it an economical and reliable solution for common applications.
Features
2-wire loop-powered HART® TDR level meter for liquids...
Features
2-wire loop-powered HART® TDR level meter for liquids...
TDR guided wave radar level sensor / for liquids / 2-wire - max. 131 ft | DR2000
This device is a TDR Level Meter for measuring distance, level, volume and mass. Its modular design makes it an economical and reliable solution for common applications.
Features
2-wire loop-powered HART® TDR level meter for liquids...
Features
2-wire loop-powered HART® TDR level meter for liquids...
FMCW radar level gauge - max. 131 ft | DR7000 series
DR7000 is known for being a FMCW 26GHz radar, which comes with an impressive state-of-the-art design. The device is able to operate over a 2GHz bandwidth, which ensures a sharper resolution, as well as a higher accuracy....
FMCW radar level gauge - max. 131 ft | DR7000 series
DR7000 is known for being a FMCW 26GHz radar, which comes with an impressive state-of-the-art design. The device is able to operate over a 2GHz bandwidth, which ensures a sharper resolution, as well as a higher accuracy. The signal dynamics are higher than in the case of DR7000, allowing accurate detection of even the smallest level changes. The DR7000 is a two-wire device that allows easy navigation display, as well as a touchscreen interface that allows for easy setup and configuration.
The signal processing comes with a large bandwidth, allowing the device to safely determine the true level in the tank, even in agitated surfaces. The design is intrinsically safe, allowing the ultimate changes in false echo rejection, even with multiple blade set agitators. The designs are also high pressure and high temperature types.
The signal processing comes with a large bandwidth, allowing the device to safely determine the true level in the tank, even in agitated surfaces. The design is intrinsically safe, allowing the ultimate changes in false echo rejection, even with multiple blade set agitators. The designs are also high pressure and high temperature types.
TDR guided wave radar level sensor - TXXXX series
The TXXXX Series of impulse-guided wave radars is manufactured by AMETEK Drexelbrook. They are TDR or Time Domain Reflectometry guided wave radar level sensors.
The unit is designed for accurate measurement of total...
The unit is designed for accurate measurement of total...
TDR guided wave radar level sensor - TXXXX series
The TXXXX Series of impulse-guided wave radars is manufactured by AMETEK Drexelbrook. They are TDR or Time Domain Reflectometry guided wave radar level sensors.
The unit is designed for accurate measurement of total level, distance or volumetric outputs on all liquids and slurries. TDR Technology has been generally used for its inherent ability to remain unaffected by variations in the process materials and electrical characteristics.
AMETEK Drexelbrook has manufactured the series with easy-to-use configuration menus in plain language. The needed level measurement can be configured within minutes.
The devices are equipped with 2-wire, HART or Modbus digital communication for Class I, Div. 1, and Zone 0 installations. In addition, they feature a push-button configuration or HART communications, with no calibration or level configurations required.
The unit is designed for accurate measurement of total level, distance or volumetric outputs on all liquids and slurries. TDR Technology has been generally used for its inherent ability to remain unaffected by variations in the process materials and electrical characteristics.
AMETEK Drexelbrook has manufactured the series with easy-to-use configuration menus in plain language. The needed level measurement can be configured within minutes.
The devices are equipped with 2-wire, HART or Modbus digital communication for Class I, Div. 1, and Zone 0 installations. In addition, they feature a push-button configuration or HART communications, with no calibration or level configurations required.
TDR guided wave radar level sensor / for liquids / 2-wire - max. 115 ft | DR 7100
The DR7100 has a more advanced design solutions and higher signal dynamics than other TDR products. A sharper pulse measures...
TDR guided wave radar level sensor / for liquids / 2-wire - max. 115 ft | DR 7100
The DR7100 has a more advanced design solutions and higher signal dynamics than other TDR products. A sharper pulse measures thinner interfaces. The superior time base stability allows better reproducibility, which translates to better reliability.
2-wire level TDR provides unparalleled performance in difficult to measure products
5 different probe designs to measure level to 115 ft
Accuracy to 3mm in liquids; not affected by product variations
2-wire level TDR provides unparalleled performance in difficult to measure products
5 different probe designs to measure level to 115 ft
Accuracy to 3mm in liquids; not affected by product variations
Guided microwave level sensor / for liquids / interface - 3 mm, 4 - 20 mA, 500 - 1 100 mm | MFM series
The MFM level meters may be used for constant monitoring of different liquids for fill level determination in the metal or plastic tanks of varied sizes. Highest measurement precision is offered with a feature...
Guided microwave level sensor / for liquids / interface - 3 mm, 4 - 20 mA, 500 - 1 100 mm | MFM series
The MFM level meters may be used for constant monitoring of different liquids for fill level determination in the metal or plastic tanks of varied sizes. Highest measurement precision is offered with a feature...
Guided microwave level sensor / for liquids / interface - IP 67, -20 °C ... +85 °C, 120 - 1000 mm | MFC series
EGC's microwave level controllers are made of stainless steel and PTFE. They are suitable for different types of containers and environments. The controllers MFC have a sensor tip which reacts...
Guided microwave level sensor / for liquids / interface - IP 67, -20 °C ... +85 °C, 120 - 1000 mm | MFC series
EGC's microwave level controllers are made of stainless steel and PTFE. They are suitable for different types of containers and environments. The controllers MFC have a sensor tip which reacts when in contact with a medium. The sensitivity of the sensor tip can be adjusted with a pushbutton. Easy fluid separation is possible as the controllers can distinguish between fluid layers like water and oil. Other media like pellets and powder are also easily and reliably detectable. The sensors are available between 120 and 1000 mm lengths which results in a wide range of installation options. They have IP 67 protection and a temperature range between -20 and +85 degrees C. Connected via M12 plugs,it can operate with supply voltages between 16 and 30 V DC .