+7 (812) 645-08-06
Portable gas detectors
select brand
Gas detector / portable - X-dock® 5300/6300/6600
The comes in various versions. The immediately ready to use X-dock 5300 features a master station including...
Gas detector / portable - X-dock® 5300/6300/6600
The comes in various versions. The immediately ready to use X-dock 5300 features a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. The X-dock 6300 and 6600 versions offers flexibility of configuration. The devic consist of a master station and can be easily expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments.
Gas detector / portable - CMS
The Dräger Chip Measurement System (CMS) combines an electronic based analyzer with substance...
Gas detector / portable - CMS
The Dräger Chip Measurement System (CMS) combines an electronic based analyzer with substance...
Rugged portable multi-gas monitor - X-am® 5600
Dräger's X-am® 5600 Series of multiple gas detection instruments is lightweight, compact,...
Rugged portable multi-gas monitor - X-am® 5600
Dräger's X-am® 5600 Series of multiple gas detection instruments is lightweight, compact,...
Rugged portable multi-gas monitor - X-am® 7000
There are more than 25 DragerSensors products that can detect more than a hundred gases. The Drager X-am 7000 is just...
Rugged portable multi-gas monitor - X-am® 7000
There are more than 25 DragerSensors products that can detect more than a hundred gases. The Drager X-am 7000 is just one of these popular models. It can be powered with three electrochemical or two catalytic bead sensors.
The device can adjust the gas setup in a spot and will adjust itself based on the application being used at a given time. It responds quickly and uses few cross sensitivities. It is also extremely accurate and will last for years to come.
The device can adjust the gas setup in a spot and will adjust itself based on the application being used at a given time. It responds quickly and uses few cross sensitivities. It is also extremely accurate and will last for years to come.
Multi-gas detector / portable - X-zone® 5000
The Dräger X-zone 5000 is an efficient transformer that is able to detect the...
Multi-gas detector / portable - X-zone® 5000
The Dräger X-zone 5000 is an efficient transformer that is able to detect the...
Multi-gas detector / portable - 135 x 77 x 43 mm, 409 g | MX6 iBrid™
Witness the dangerous oxygen levels, combustible and toxic gas, and other volatile organic compounds (VOCs) such as never seen before. The MX6 iBrid™ is much more than a commendable hybrid of Industrial Scientific’s most prestigious analyzing technologies....
Multi-gas detector / portable - 135 x 77 x 43 mm, 409 g | MX6 iBrid™
Witness the dangerous oxygen levels, combustible and toxic gas, and other volatile organic compounds (VOCs) such as never seen before. The MX6 iBrid™ is much more than a commendable hybrid of Industrial Scientific’s most prestigious analyzing technologies....
Multi-gas detector / portable - 172 x 67 x 66 mm | Ventis™ MX4
The Ventis™ MX4 detects and monitors gas levels accurately and effectively. This gas meter surveys up to four different gases,...
Multi-gas detector / portable - 172 x 67 x 66 mm | Ventis™ MX4
The Ventis™ MX4 detects and monitors gas levels accurately and effectively. This gas meter surveys up to four different gases, extracts samples from a depth of 100 feet (complete with an incorporated sampling pump; completely alternative), exceeds normal battery life with a total of a 20-hour cycle, provides a more convenient and efficient method of gas detection and monitoring with the Ventis app, available on iNet (DS2-compliant), and is still operational, regardless of pump presence or absence.
Single gas detector / individual - 99 x 51 x 35 mm, 126 g | Tango™ TX1
When workers wear the Tango TX1, they are fully protected and will be the safest single gas monitor users. This device comes with really advanced technology incorporated into it, along with a runtime of three years...
Single gas detector / individual - 99 x 51 x 35 mm, 126 g | Tango™ TX1
When workers wear the Tango TX1, they are fully protected and will be the safest single gas monitor users. This device comes with really advanced technology incorporated into it, along with a runtime of three years and various patents pending, which will increase the safety of workers, regardless of the bump test frequency, which reduces overall costs greatly.
In addition to this, the DualSense technology was designed to increase worker safety no matter what the current bump test policy is, while the battery life is longer than in most similar products, being replaceable for another three years of continuous operation.
Next, the alarm sounds at 100dB, twice the volume of Industrial Scientifics GasBadge units and another gas instrument. Users can also increase the volume for higher noise environments.
In addition to this, the DualSense technology was designed to increase worker safety no matter what the current bump test policy is, while the battery life is longer than in most similar products, being replaceable for another three years of continuous operation.
Next, the alarm sounds at 100dB, twice the volume of Industrial Scientifics GasBadge units and another gas instrument. Users can also increase the volume for higher noise environments.
Single gas detector / individual - 94 x 50.8 x 27.9 mm, 85 g | GasBadge Pro
The Industrial Scientific GasBadge ® Pro is a high performance single gas detector that utilizes interchangeable "Smart" sensors to observe potentially unsafe oxygen...
Single gas detector / individual - 94 x 50.8 x 27.9 mm, 85 g | GasBadge Pro
The Industrial Scientific GasBadge ® Pro is a high performance single gas detector that utilizes interchangeable "Smart" sensors to observe potentially unsafe oxygen...
Single gas detector / individual - 86 x 58 x 19 mm, 98 g | T40 Rattler™
The T40 Rattler™ is a free-of-maintenance gas monitor customized to secure personnel from fatal carbon monoxide or hydrogen sulfide gas exposure in extreme conditions. This product...
Single gas detector / individual - 86 x 58 x 19 mm, 98 g | T40 Rattler™
The T40 Rattler™ is a free-of-maintenance gas monitor customized to secure personnel from fatal carbon monoxide or hydrogen sulfide gas exposure in extreme conditions. This product has features that are normally found in larger multi-gas monitors. Its monitor displays ambient hydrogen sulfide or carbon monoxide readings in PPM that will notify the user when gas concentrations surpass the high or low levels. It also has a hold/peak feature that includes a patented flip-cap calibration adapter for simple and fast calibration to reveal the highest reading during a shift. It comes with a two-year warranty from the date of its manufacture and operates up to 1,500 hours on a single “AA” battery.
Single gas detector / portable - MICRO IV
The Micro IV single-gas detector comes with memory and an infrared interface besides a data logger. The device is an advanced version of the Micro III. Many of the Micro III features such as smart, interchangeable...
Single gas detector / portable - MICRO IV
The Micro IV single-gas detector comes with memory and an infrared interface besides a data logger. The device is an advanced version of the Micro III. Many of the Micro III features such as smart, interchangeable sensor technology and low cost of purchase where the 1 x AA battery lasts for 6 months, were all retained. The integrated data logger is able to record and then time-stamp all events. The data can be transferred to a PC using the DI220 data interface station or DS220 docking station. The Micro IV single-gas detector features three alarm levels apart from the TWA and STEL alarms. It offers highly visible red LED alarms and a loud sounder. It may also be outfitted with vibrating alarms, if required. The gas concentration readings may be easily read by the users with its large display.
Multi-gas detector / portable - Microtector II G450
The Microtector II G450 4-Gas detector represents a very robust device designed for measuring up to 4 gases at once including: oxygen (O2), hydrogen sulphide (H2S), carbon monoxide (CO) and cumbustible gases...
Multi-gas detector / portable - Microtector II G450
The Microtector II G450 4-Gas detector represents a very robust device designed for measuring up to 4 gases at once including: oxygen (O2), hydrogen sulphide (H2S), carbon monoxide (CO) and cumbustible gases...
Portable multi-gas photo-ionization detector - Microtector II G460
7-Gas detector is durable and sturdy while being light. The device is made by using interchangeable sensor technology. It offers economical use and added functionality. The Microtector II G460 can be used for measuring...
Portable multi-gas photo-ionization detector - Microtector II G460
7-Gas detector is durable and sturdy while being light. The device is made by using interchangeable sensor technology. It offers economical use and added functionality. The Microtector II G460 can be used for measuring up to 7 gases that are present in ambient air, simultaneously. This is to ensure workplace safety. Its sensor slots can be equipped on an individual basis.
7-Gas detector is available in different detection principles for optimal results. The G460 is certified to EN 60079-29-1 (combustible gas performance) EN 50104 (oxygen), EN 45544-1 (toxic) and EN 45544-2 (toxic). The detector can be used to detect various gases such as O2, H2S, CO, CO2 and combustible gases. For other gases such as HCl, PH3, HCN, NO, NO2, SO2 and CO2, other appropriate sensors may be used. It uses infrared method to ensure safety.
7-Gas detector is available in different detection principles for optimal results. The G460 is certified to EN 60079-29-1 (combustible gas performance) EN 50104 (oxygen), EN 45544-1 (toxic) and EN 45544-2 (toxic). The detector can be used to detect various gases such as O2, H2S, CO, CO2 and combustible gases. For other gases such as HCl, PH3, HCN, NO, NO2, SO2 and CO2, other appropriate sensors may be used. It uses infrared method to ensure safety.