+7 (812) 645-08-06
Network interface cards
select brand
Network interface card - TIC 020
TIC 020 is a TAP Interface Card (TIC) for the SCANFLEX boundary-scan hardware platform. The module features a programmable multi-bus...
Network interface card - TIC 020
TIC 020 is a TAP Interface Card (TIC) for the SCANFLEX boundary-scan hardware platform. The module features a programmable multi-bus interface that is compatible with numerous test and debug protocols and target interfaces, including IEEE 1149.1, 1149.6, 1149.7, 1532; IEEE-ISTO 5001; and many proprietary non-JTAG interfaces, such as BDM (Background Debug Mode) from Freescale, DAP (Device Access Port) from Infineon, SBW (Spy-Bi-Wire) from Texas Instruments, and SWD (Serial Wire Debug) from ARM.
Radio board WLAN / wireless LAN - 2.4 GHz, 802.11b/g | Digi Connect® Wi-Wave
Built on Digi's own 802.11b/g wireless LAN technology, Digi Connect Wi-Wave is the industry's first off-the-shelf...
Radio board WLAN / wireless LAN - 2.4 GHz, 802.11b/g | Digi Connect® Wi-Wave
Built on Digi's own 802.11b/g wireless LAN technology, Digi Connect Wi-Wave is the industry's first off-the-shelf WLAN radio card specifically designed to meet the long-term product availability and specific operating temperature requirements of embedded designs and their extended product life cycles. It provides complete software platform support for Microsoft Windows CE 5.0/6.0 (ARM, MIPS, x86), Windows XP and Linux (2.6.29 and greater).
Network interface card - Ax9150 UMI-MTConnect
The Ax9150 UMI MTC is a fully configurable MTConnect hardware adapter that allows you to communicate with your CNC machine as never before, utilizing the MTConnect standard protocol. It has compatibility along the lines of a machine monitoring retrofit, so rather than buying a new controller, enhance your oldest legacy controllers to todays communications functionality. Its easy to install!
Ax9150...
Ax9150...
Network interface card - Ax9150 UMI-MTConnect
The Ax9150 UMI MTC is a fully configurable MTConnect hardware adapter that allows you to communicate with your CNC machine as never before, utilizing the MTConnect standard protocol. It has compatibility along the lines of a machine monitoring retrofit, so rather than buying a new controller, enhance your oldest legacy controllers to todays communications functionality. Its easy to install!
Ax9150 UMI MTC Hardware Features
- Configuration Utility & Logic Ladder generator via MERLIN serverMTC (included)
- Supports all makes and models of machines
- Power by machine voltage (+12 to 24V)
- Magnetic mount for easy installation
- 8 Digital inputs + 4 digital outputs
- Ethernet connectivity (Wired standard, wireless as an option)
- Machine event monitoring via MTConnect
- Communicates to any standard MTConnect agent
- Sample adapter configuration files included to ensure an easy and accurate installation
- AVR ATMEGA2560 microprocessor CPU
- 8 digital inputs, optically isolated 4 groups of 2, (DI:5-30VDC, 1A), quick disconnect
- Upgradeable to 24 inputs; analog + digital (via optional expansion add on module)
- 4 Digital outputs 4 commons, 4NC + 4N0 (DO:1A@30VDC), quick disconnect
- Power source 12 24 VDC or via Fanucs Serial Port
- 15KV Surge protection
- Power external devices 5VDC up to 1A for wireless bridge or other peripherals
- Self resetting fuses
- Non-volatile memory protects set up in the event of an extended power loss
- Real time clock (battery backed)
- Magnetic base for screw-less mounting
- Rechargeable lifetime perma charge lithium battery
Ax9150 UMI MTC Hardware Features
- Configuration Utility & Logic Ladder generator via MERLIN serverMTC (included)
- Supports all makes and models of machines
- Power by machine voltage (+12 to 24V)
- Magnetic mount for easy installation
- 8 Digital inputs + 4 digital outputs
- Ethernet connectivity (Wired standard, wireless as an option)
- Machine event monitoring via MTConnect
- Communicates to any standard MTConnect agent
- Sample adapter configuration files included to ensure an easy and accurate installation
- AVR ATMEGA2560 microprocessor CPU
- 8 digital inputs, optically isolated 4 groups of 2, (DI:5-30VDC, 1A), quick disconnect
- Upgradeable to 24 inputs; analog + digital (via optional expansion add on module)
- 4 Digital outputs 4 commons, 4NC + 4N0 (DO:1A@30VDC), quick disconnect
- Power source 12 24 VDC or via Fanucs Serial Port
- 15KV Surge protection
- Power external devices 5VDC up to 1A for wireless bridge or other peripherals
- Self resetting fuses
- Non-volatile memory protects set up in the event of an extended power loss
- Real time clock (battery backed)
- Magnetic base for screw-less mounting
- Rechargeable lifetime perma charge lithium battery
Network interface card - max. 2 GB | Mx1053
FEATURES
3 serial ports
Self Resetting Fuse
Bi-Directional Data Transfer
Ethernet connectivity to the network
Each CNC a node on the network
Converts Ethernet to Serial RS232
Supports maximum baud-rate transfers
Supports RS232 Barcode readers
MX2000...
3 serial ports
Self Resetting Fuse
Bi-Directional Data Transfer
Ethernet connectivity to the network
Each CNC a node on the network
Converts Ethernet to Serial RS232
Supports maximum baud-rate transfers
Supports RS232 Barcode readers
MX2000...
Network interface card - max. 2 GB | Mx1053
FEATURES
3 serial ports
Self Resetting Fuse
Bi-Directional Data Transfer
Ethernet connectivity to the network
Each CNC a node on the network
Converts Ethernet to Serial RS232
Supports maximum baud-rate transfers
Supports RS232 Barcode readers
MX2000 Handheld Termininal compatible
Native support for local DNC file storage up to 2GB with optional AX2200 High Speed File Server
Magnetic mounting system
Execute Part Pograms of any length with DNC Software
On-board power supply allows
BENEFITS
Supports maximum rate of data flow for any CNC
Increased baud rates improves program loading up to 8 times
Simple to install on any control
Punch out remote commands from non-punch controls
Works with DNC Software, designed for Net-DNC & AxDNC
Flexable interface options means it will fit every CNC
Bypass restrictive file name conventions with Mx2000
Eliminate calling wrong files by using the barcode reader option
Replaces outdated shop floor serial cabling and serial hubs
Preliminary step to any OEE system
3 serial ports
Self Resetting Fuse
Bi-Directional Data Transfer
Ethernet connectivity to the network
Each CNC a node on the network
Converts Ethernet to Serial RS232
Supports maximum baud-rate transfers
Supports RS232 Barcode readers
MX2000 Handheld Termininal compatible
Native support for local DNC file storage up to 2GB with optional AX2200 High Speed File Server
Magnetic mounting system
Execute Part Pograms of any length with DNC Software
On-board power supply allows
BENEFITS
Supports maximum rate of data flow for any CNC
Increased baud rates improves program loading up to 8 times
Simple to install on any control
Punch out remote commands from non-punch controls
Works with DNC Software, designed for Net-DNC & AxDNC
Flexable interface options means it will fit every CNC
Bypass restrictive file name conventions with Mx2000
Eliminate calling wrong files by using the barcode reader option
Replaces outdated shop floor serial cabling and serial hubs
Preliminary step to any OEE system