+7 (812) 645-08-06
Shims, spacers
select brand
Plastic spacer
The conveyor roller sleeve spacers or otherwise known as spacer sleeves was manufactured by Dura-Belt company. It provides space between...
Plastic spacer
The conveyor roller sleeve spacers or otherwise known as spacer sleeves was manufactured by Dura-Belt company. It provides space between the product and rollers, preventing products (e.g., glass) from touching the rollers. The unit fits at any roller from 1.9" (48mm) diameter up having a durometers of 80 A for brown and 83 A for orange. With its flat belts up to 1/8" (3.2 mm) thick, 1.5" (38 mm) wide, 83 A, no tooling is charge. It has a low cost even in small quantities and it is easy to install.
Metallic spacer
CCB Composants presents metallic spacers in a variety of models.
Hexagonal male/female spacers are available in sizes between M2-M8, with hex width between 4-13 mm and length between 5-80...
Hexagonal male/female spacers are available in sizes between M2-M8, with hex width between 4-13 mm and length between 5-80...
Metallic spacer
CCB Composants presents metallic spacers in a variety of models.
Hexagonal male/female spacers are available in sizes between M2-M8, with hex width between 4-13 mm and length between 5-80 mm. Hexagonal male/female with undercut are available in sizes between M2-M8 with hex width in the range of 4-13 mm and length between 5-100 mm. Hexagonal female/female is available in sizes between M2 to M8 with hex width between 4-10 mm and length between 5-80 mm.
Round spacers are available with inner diameter between 2.2-6,3 mm, outside diameter between 4-10 mm, and length between 1-50 mm. Special version is available for SUB-D connectors with any size combinations between M3 and 4-40UNC. Hex has width and length of 5 mm each. The outer thread has length between 6 or 8 or 12 mm.
Hexagonal male/female spacers are available in sizes between M2-M8, with hex width between 4-13 mm and length between 5-80 mm. Hexagonal male/female with undercut are available in sizes between M2-M8 with hex width in the range of 4-13 mm and length between 5-100 mm. Hexagonal female/female is available in sizes between M2 to M8 with hex width between 4-10 mm and length between 5-80 mm.
Round spacers are available with inner diameter between 2.2-6,3 mm, outside diameter between 4-10 mm, and length between 1-50 mm. Special version is available for SUB-D connectors with any size combinations between M3 and 4-40UNC. Hex has width and length of 5 mm each. The outer thread has length between 6 or 8 or 12 mm.
Countertop spacer
The CCB spacers team is always ready to attend to a customer's request on special...
Countertop spacer
The CCB spacers team is always ready to attend to a customer's request on special parts. These units may either be standard or in accordance with the individualized needs expressed in the customer's sketch. however, they are only capable of processing within a 1.5 - 20 mm diameter limit, and M1, M6 - M10 threading limit.
Plastic spacer - ID : 3.6 mm, OD : 6 mm
The plastic spacer is manufactured by Bulte, and has an inner diameter...
Plastic spacer - ID : 3.6 mm, OD : 6 mm
The plastic spacer is manufactured by Bulte, and has an inner diameter of 3.6 mm and outer diameter of 6 mm, which enables a constant gap between 2 components. It also has a high resistance to temperature and liquids, which is secure to utilize in a broad range of requisitions.
Lashing spacer
The Retaining Spacer can be utilized for pre-assembling screws and bolts with no risk of loss. An enhanced electric insulation mechanism is provided. This enables it to be well suited for its corresponding application.
Plastic spacer / hexagonal
The Metric Hex-Tapped Spacer, manufactured by Bulte®, generally functions by insulating...
Plastic spacer / hexagonal
The Metric Hex-Tapped Spacer, manufactured by Bulte®, generally functions by insulating...
Printed circuit spacer
Printed circuit board spacers are integrated with clips measuring M3 to M4. It is specifically...
Printed circuit spacer
Printed circuit board spacers are integrated with clips measuring M3 to M4. It is specifically constructed for plates and printed circuit boards possessing a diameter of 4.0 mm. This tool is characterized by its optimum dimensional stability and is fabricated from either nylon, blue nylon, green nylon or yellow nylon among others.