+7 (812) 645-08-06
Machine feet
select brand
Leveling foot - Tru-Center™
Jergens Tru-Center tapped leveling pads are made out of high tensile steel 4140, with a zinc-plated finish. The pads...
Leveling foot - Tru-Center™
Jergens Tru-Center tapped leveling pads are made out of high tensile steel 4140, with a zinc-plated finish. The pads...
Swivel foot
Jergens carbide toggle pads deliver multi-point contact for compensation of rough or out-of-round surfaces. Points provide a positive grip by embedding...
Swivel foot
Jergens carbide toggle pads deliver multi-point contact for compensation of rough or out-of-round surfaces. Points provide a positive grip by embedding in the workpiece. Any possible workpiece radial load is eliminated.
It should be noted that metric toggle pads feature two flats on the head and not a hex configuration.
The insert tip is either 4140 steel or carbide with a black oxide finish. The heat treat is plain pad Rc 36-40. It has a 2B-UNC thread.
Also available with the pads are FixturePro design software and PartSpec CD.
It should be noted that metric toggle pads feature two flats on the head and not a hex configuration.
The insert tip is either 4140 steel or carbide with a black oxide finish. The heat treat is plain pad Rc 36-40. It has a 2B-UNC thread.
Also available with the pads are FixturePro design software and PartSpec CD.
Appliance foot - GK series
The Casing Feet GK from Rohde is an extension leg with lift lever and a snap-in...
Appliance foot - GK series
The Casing Feet GK from Rohde is an extension leg with lift lever and a snap-in lock in both positions. Its simple, compact design is constructed with glass fiber reinforced polyamide with a black satin finish. It is integrated with a rubber foot to avoid slipping even at the extended position.
Appliance foot - GG
The Rhode's Casing Feet GG is a case that functions as a stand or protection to the feet...
Appliance foot - GG
The Rhode's Casing Feet GG is a case that functions as a stand or protection to the feet of your appliances. This comes in different materials such as Type A which is made of PVC black, and Types B and C which are made of natural black rubber. There are two ways in assembling the casing feet, the first one is by screwing and the second is by plugging.
Machine foot - GZ
The GZ Extension Legs by ROHDE are made from die-cast zinc which is integrated with poly-amide PA 6 for the locking bar and PVC rubber for the feet....
Machine foot - GZ
The GZ Extension Legs by ROHDE are made from die-cast zinc which is integrated with poly-amide PA 6 for the locking bar and PVC rubber for the feet. All are encased in a light grey (RAL 7035) or black half-matt frames.
This piece of equipment are highly durable with a minimum stress resistance of 200 N. They can be easily installed using ALLEN screws or nuts which are made according to DIN standards 933 and 934 specifications. The self locking mechanism of the GZ are highly stable whether in extended or collapsed position due to its slide proof rubberized feet.
This piece of equipment are highly durable with a minimum stress resistance of 200 N. They can be easily installed using ALLEN screws or nuts which are made according to DIN standards 933 and 934 specifications. The self locking mechanism of the GZ are highly stable whether in extended or collapsed position due to its slide proof rubberized feet.
Anti-vibration foot / leveling / data center - MDSF
The Sugatsune sway foot-leveling glide are medium weight mounts ideally used for...
Anti-vibration foot / leveling / data center - MDSF
The Sugatsune sway foot-leveling glide are medium weight mounts ideally used for vertically applied loads to prevent transmission of noise and vibration caused by rotation of imbalanced equipment. It offers a load capacity of 35 - 700 kgf and is best suitable for data center racks, medical and mechanical industries.
Leveling foot / stainless steel / for heavy load - ADHS, ADH series
These Adjusters have high weight tolerance with steel ADH, stainless steel ADH and steel...
Leveling foot / stainless steel / for heavy load - ADHS, ADH series
These Adjusters have high weight tolerance with steel ADH, stainless steel ADH and steel scuffing preventive ADHSK designs. The ADHSK model provides smoother vertical adjustment for galling and preventive treatment. With two types of M24 and M30 diametered screws which applies in large furniture and fixtures also for LCD production.
Leveling foot stainless steel - ADPS
Sugatsune Kogyo's ADCS stainless steel leveling guide is typically used on medical and other industrial...
Leveling foot stainless steel - ADPS
Sugatsune Kogyo's ADCS stainless steel leveling guide is typically used on medical and other industrial equipment. Its simple design integrates a base that reduces vibration and shock. The nut located at the bottom glides effortlessly and adjusts the height with the use of a socket wrench. It is affordable, quick and easy to install.
Machine foot - EA
These bolt swivels are best suited to be used any floor type, no matter how uneven...
Machine foot - EA
These bolt swivels are best suited to be used any floor type, no matter how uneven they are. The parts used in this swivel can be easily separated for recycling purposes.
Their applications are not restricted to any industry in particular and are designed with high international standards in mind.
Their applications are not restricted to any industry in particular and are designed with high international standards in mind.