+7 (812) 645-08-06
Locks, draw latches, latches
select brand
Locking system - max. 2 000 kN | KTR-STOP® RL series
Product characteristics
Rotor Lock for wind turbines
Locks the rotor on the shaft side...
Rotor Lock for wind turbines
Locks the rotor on the shaft side...
Locking system - max. 2 000 kN | KTR-STOP® RL series
Product characteristics
Rotor Lock for wind turbines
Locks the rotor on the shaft side with low speed
Hydraulic and mechanical version available in two sizes
Monitoring of locking operation via sensors
Description
Rotorlock is a locking system by means of which the rotor of a wind power plant can be locked mechanically for service after stopping.
Rotor Lock for wind turbines
Locks the rotor on the shaft side with low speed
Hydraulic and mechanical version available in two sizes
Monitoring of locking operation via sensors
Description
Rotorlock is a locking system by means of which the rotor of a wind power plant can be locked mechanically for service after stopping.
Safety locking device for doors - max. 1 100 N | L100 series
The L100 is a dynamic safety locking...
Safety locking device for doors - max. 1 100 N | L100 series
The L100 is a dynamic safety locking tool, ideal for personnel and machine security along with guard machines and systems with stopping times.
Safety locking device for doors - max. 2 500 N | L200
The Safety Locking Device L200 Series created by Leuze Electronic features a metal constructed...
Safety locking device for doors - max. 2 500 N | L200
The Safety Locking Device L200 Series created by Leuze Electronic features a metal constructed framework with silver alloy electrical contact material. The device consists of a magnetic element capable of protecting the device against short circuit. Additionally, the product is intended for the protection of large protective doors and gates.
Rod lock / for cylinders - Ø 40 - 100 mm, 3 - 6 bar, -5 °C ... +70 °C | 492 series
It is designed to hold the rod of the cylinder under load in the extended or retracted
position in the event of air pressure or power failure during machine operation.
The rod-locking device acts mechanically on the cylinder rod. It is disengaged
when pressure is applied.
...
position in the event of air pressure or power failure during machine operation.
The rod-locking device acts mechanically on the cylinder rod. It is disengaged
when pressure is applied.
...
Rod lock / for cylinders - Ø 40 - 100 mm, 3 - 6 bar, -5 °C ... +70 °C | 492 series
It is designed to hold the rod of the cylinder under load in the extended or retracted
position in the event of air pressure or power failure during machine operation.
The rod-locking device acts mechanically on the cylinder rod. It is disengaged
when pressure is applied.
...
position in the event of air pressure or power failure during machine operation.
The rod-locking device acts mechanically on the cylinder rod. It is disengaged
when pressure is applied.
...
Rod lock / for cylinders - Ø 40 - 100 mm, 4 - 8 bar, -5 °C ... +70 °C | 492 series
Designed to stop and hold the rod of the cylinder under load in the event of air
pressure or power failure. The rod lock is an elastic mechanical device acting on
brake pads. It is...
pressure or power failure. The rod lock is an elastic mechanical device acting on
brake pads. It is...
Rod lock / for cylinders - Ø 40 - 100 mm, 4 - 8 bar, -5 °C ... +70 °C | 492 series
Designed to stop and hold the rod of the cylinder under load in the event of air
pressure or power failure. The rod lock is an elastic mechanical device acting on
brake pads. It is disengaged when pressure is applied.
Stops and holds the piston rod at any point of its stroke
Holds maximum allowable cylinder load without drifting
Locks in the absence of air
Bi-directional action
Cast iron brake pads, concentric on the rod, ensure long service life without
damaging the piston rod
Compact and easy to install
Any mounting position
Reduced weight (light metal alloy body)
Possibility of mounting to cylinders complying with ISO 15552-AFNOR-DIN standards
(longer rod, without front bushing)
pressure or power failure. The rod lock is an elastic mechanical device acting on
brake pads. It is disengaged when pressure is applied.
Stops and holds the piston rod at any point of its stroke
Holds maximum allowable cylinder load without drifting
Locks in the absence of air
Bi-directional action
Cast iron brake pads, concentric on the rod, ensure long service life without
damaging the piston rod
Compact and easy to install
Any mounting position
Reduced weight (light metal alloy body)
Possibility of mounting to cylinders complying with ISO 15552-AFNOR-DIN standards
(longer rod, without front bushing)