+7 (812) 645-08-06
Electric micro-motors
select brand
DC motor / miniature - 0.021 - 4.163 W | DC28
Design
Motor DC28 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in combination with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4,...
Motor DC28 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in combination with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4,...
DC motor / miniature - 0.021 - 4.163 W | DC28
Design
Motor DC28 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in combination with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead
can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output
torque required is low in an economical model (GB7P). Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done on special request.
Motor DC28 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in combination with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead
can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output
torque required is low in an economical model (GB7P). Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done on special request.
DC motor / miniature - 0.07 - 0.966 W | DC32
Design
Motor DC32 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB2, GB5P, GB5H,
GB38OCP,...
Motor DC32 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB2, GB5P, GB5H,
GB38OCP,...
DC motor / miniature - 0.07 - 0.966 W | DC32
Design
Motor DC32 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB2, GB5P, GB5H,
GB38OCP, GB3, GB4, GB7,GB8
& GBW. Depending on the
application, output speed,
load applied, etc. the type of
gearhead can be selected.
Various types of gears i.e. poly
acetal, sintered iron, brass or
steel gears can be used based
on the requirement. Poly
acetal or sintered gears damp
the noise. Case hardened
steel gears are always on the
output for load
considerations. Complete
poly acetal gears are used
when the output torque
required is low. Linear drive is
possible with gearhead
GB4,GB7,GBW with M6 x 1
mm pitch screw. The linear
guide & screw arrangement
can be done only on special
request.
Motor DC32 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB2, GB5P, GB5H,
GB38OCP, GB3, GB4, GB7,GB8
& GBW. Depending on the
application, output speed,
load applied, etc. the type of
gearhead can be selected.
Various types of gears i.e. poly
acetal, sintered iron, brass or
steel gears can be used based
on the requirement. Poly
acetal or sintered gears damp
the noise. Case hardened
steel gears are always on the
output for load
considerations. Complete
poly acetal gears are used
when the output torque
required is low. Linear drive is
possible with gearhead
GB4,GB7,GBW with M6 x 1
mm pitch screw. The linear
guide & screw arrangement
can be done only on special
request.
DC motor / miniature - 0.183 - 5.04 W | DC30
Design
Motor DC30 is a carbon brush DC motor which is used in combination with many MechTex gearheads. The standard gearheads used in conjunction with this motor are GB2,GB5P, GB5H, GB38OCP, GB3,...
Motor DC30 is a carbon brush DC motor which is used in combination with many MechTex gearheads. The standard gearheads used in conjunction with this motor are GB2,GB5P, GB5H, GB38OCP, GB3,...
DC motor / miniature - 0.183 - 5.04 W | DC30
Design
Motor DC30 is a carbon brush DC motor which is used in combination with many MechTex gearheads. The standard gearheads used in conjunction with this motor are GB2,GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
Motor DC30 is a carbon brush DC motor which is used in combination with many MechTex gearheads. The standard gearheads used in conjunction with this motor are GB2,GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
DC motor / miniature - 0.07 - 0.883 W | DC33
Design
Motor DC33 is a carbon brush DC motor which is used in combination
with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3,...
Motor DC33 is a carbon brush DC motor which is used in combination
with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3,...
DC motor / miniature - 0.07 - 0.883 W | DC33
Design
Motor DC33 is a carbon brush DC motor which is used in combination
with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can
be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered
gears damp the noise. Case hardened steel gears are always on the output
for load considerations. Complete poly acetal gears are used when the output
torque required is low. Linear drive is possible with gearhead GB4,GB7,GBW
with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be
done only on special request.
Motor DC33 is a carbon brush DC motor which is used in combination
with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can
be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered
gears damp the noise. Case hardened steel gears are always on the output
for load considerations. Complete poly acetal gears are used when the output
torque required is low. Linear drive is possible with gearhead GB4,GB7,GBW
with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be
done only on special request.
DC motor / miniature - 0.339 - 8.76 W | DC38
Design
Motor DC38 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB5P, GB5H, GB38OCP,
GB3,...
Motor DC38 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB5P, GB5H, GB38OCP,
GB3,...
DC motor / miniature - 0.339 - 8.76 W | DC38
Design
Motor DC38 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB5P, GB5H, GB38OCP,
GB3, GB4, GB7, GB8 & GBW.
Depending on the
application, output speed,
load applied, etc. the type of
gearhead can be selected.
Various types of gears i.e. poly
acetal, sintered iron, brass or
steel gears can be used based
on the requirement. Poly
acetal or sintered gears damp
the noise. Case hardened
steel gears are always on the
output for load
considerations. Complete
poly acetal gears are used
when the output torque
required is low. Linear drive is
possible with gearhead GB4,
GB7, GBW with M6 x 1 mm
pitch screw. The linear guide
& screw arrangement can be
done only on special request.
Motor DC38 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB5P, GB5H, GB38OCP,
GB3, GB4, GB7, GB8 & GBW.
Depending on the
application, output speed,
load applied, etc. the type of
gearhead can be selected.
Various types of gears i.e. poly
acetal, sintered iron, brass or
steel gears can be used based
on the requirement. Poly
acetal or sintered gears damp
the noise. Case hardened
steel gears are always on the
output for load
considerations. Complete
poly acetal gears are used
when the output torque
required is low. Linear drive is
possible with gearhead GB4,
GB7, GBW with M6 x 1 mm
pitch screw. The linear guide
& screw arrangement can be
done only on special request.
DC motor / miniature - ø 8 mm, 0.7 W | 08G61
The 08G61 is a brush DC electric motor which is convenient for metal commutation through its maximum power...
DC motor / miniature - ø 8 mm, 0.7 W | 08G61
The 08G61 is a brush DC electric motor which is convenient for metal commutation through its maximum power density. It is suitable for operation in portable and small equipment.
This unit can be used in a wide range of applications that involve luxury goods and watch winders. Protection and access controls are equipped for increased security, such as door locks, monitoring and inspection system.
This unit can be used in a wide range of applications that involve luxury goods and watch winders. Protection and access controls are equipped for increased security, such as door locks, monitoring and inspection system.
