+7 (812) 645-08-06
DC motor / miniature - 0.339 - 8.76 W | DC38
DesignMotor DC38 is a carbon brush
DC motor which is used in
combination with many Mech
Tex gearheads. The standard
gearheads used in
conjunction with this motor
are GB5P, GB5H, GB38OCP,
GB3, GB4, GB7, GB8 & GBW.
Depending on the
application, output speed,
load applied, etc. the type of
gearhead can be selected.
Various types of gears i.e. poly
acetal, sintered iron, brass or
steel gears can be used based
on the requirement. Poly
acetal or sintered gears damp
the noise. Case hardened
steel gears are always on the
output for load
considerations. Complete
poly acetal gears are used
when the output torque
required is low. Linear drive is
possible with gearhead GB4,
GB7, GBW with M6 x 1 mm
pitch screw. The linear guide
& screw arrangement can be
done only on special request.