+7 (812) 645-08-06
Special handling and lifting tools
select brand
Pallet changer hydraulic - 3 kW, 140 bar
Pallet changers enable the rapid changing of metal sheets with precision. The utilization and efficiency of flat-bed laser machines are assured. HOERBIGER has designed a tailor-made hydraulic...
Pallet changer hydraulic - 3 kW, 140 bar
Pallet changers enable the rapid changing of metal sheets with precision. The utilization and efficiency of flat-bed laser machines are assured. HOERBIGER has designed a tailor-made hydraulic system which is utilized for raising and lowering the metal sheets in pallets. Four cylinders hydraulically raise and lower the pallets. The speeds of the cylinders are synchronized by a speed-controlled and compensated quadruple internal gear pump.
Individual regulation of the motor speed produces the optimal stroke. The pressure level is protected and the end of stroke equalization is ensured by a combination of the check valves with the pressure control valve. The system is easy to install due to the reduced number of components and hydraulic interfaces.
Individual regulation of the motor speed produces the optimal stroke. The pressure level is protected and the end of stroke equalization is ensured by a combination of the check valves with the pressure control valve. The system is easy to install due to the reduced number of components and hydraulic interfaces.
Skate wheel rail - 28 mm, 80 N | Floway series
This diameter of this roller track floway measures 25 mm, while the roller pitch is at...
Skate wheel rail - 28 mm, 80 N | Floway series
This diameter of this roller track floway measures 25 mm, while the roller pitch is at 28 mm. The steel roller shaft extends 3 mm and the rollers themselves are constructed of high quality durable polyethylene. The tracks of this floway are made of 1 mm thick zinc-plated steel, and the heavy-duty track is capable of handling 80 N per roller.
Skate wheel rail - 52 mm | BU 40
These roller tracks have polymer or steel wheels, with a diameter of 48mm, a...
Skate wheel rail - 52 mm | BU 40
These roller tracks have polymer or steel wheels, with a diameter of 48mm, a wheel pitch of 52mm, as well as the capability of being snapped into place in the tracks. The tracks are constructed from 1.2mm zinc-plated steel, being ideal for gravity applications. A maximum load of 200N can be held per roller.
Skate wheel rail - 52 - 156 mm | BU 50
The Interroll Roller Track BU50 features polymer or steel rollers based on Series 1700 with...
Skate wheel rail - 52 - 156 mm | BU 50
The Interroll Roller Track BU50 features polymer or steel rollers based on Series 1700 with a diameter of 50mm. The polymer rollers, with maximum load per roller of 400N, are also available with flange. The maximum load per roller (steel) is 1600 N.
The BU50 features track made of 2.5 mm zinc plated steel, and hole pitch of track as 26 mm.
The BU50 features track made of 2.5 mm zinc plated steel, and hole pitch of track as 26 mm.
Pneumatic lifting system - HE series
Lifting Unit HE can be used either as a horizontal or vertical unit, but it is most often...
Pneumatic lifting system - HE series
Lifting Unit HE can be used either as a horizontal or vertical unit, but it is most often used at an intensified moment load. Lifting Unit HE comes in a concise and enormously steady unit suitable for straight and short actions. Lifting Unit HE can be utilized even in mounting conditions that are extremely limited because of its optimal recanted length ratio.