Welding wire feeders

select brand


ESAB

Welding system wire feeder - MEI 10

The MEI 10 is a wire feed, manufactured by ESAB, that features a solid construction that keeps the size of the tool in minimum even...

Welding system wire feeder - MEI 10

The MEI 10 is a wire feed, manufactured by ESAB, that features a solid construction that keeps the size of the tool in minimum even when it is attached. This device is suitable for aluminum welding functions due to its short fedding distance starting from its reel to the molten pool. Moreover, the wire feed unit is normally used for a light and stainless welding.

This device is attributed by its 0.5 kg weight and its wire dimensions of 0.8 mm to 1.0 mm for aluminium and 0.8 mm for steel.

Welding system wire feeder - MEI 21

MEI 21 wire feed unit

The MEI 21 is a wire feed unit with four wheel drive for orbital TIG welding....

Welding system wire feeder - MEI 21

MEI 21 wire feed unit

The MEI 21 is a wire feed unit with four wheel drive for orbital TIG welding....
FRONIUS

Welding system wire feeder - 10 - 750 cm/min | KD 4000

The KD 4000 is a wire feeder unit manufactured by Fronius. It is made specifically for...

Welding system wire feeder - 10 - 750 cm/min | KD 4000

The KD 4000 is a wire feeder unit manufactured by Fronius. It is made specifically for mechanized TIG coldwire welding.

Its key features include an external addressing wire speed through an interface; four rolls for wire diameter of 0.03 inches; closed wire spool cover for 300 mm/15 kg; a protection cover motorplate; and a handle.

Welding wire feeder / soldering - Laser Hotwire

The laser hotwire of Fronius heats the the base metals that include CrNi, steels, duplex...

Welding wire feeder / soldering - Laser Hotwire

The laser hotwire of Fronius heats the the base metals that include CrNi, steels, duplex steels, special materials and galvanized sheets. The pre-heated wire is brazed and welded with the base metals. It performs speed with quality along with the balance of the process and welding and brazing spatter-free even if the speed is at its extensive level.
Lincoln Electric

Welding system wire feeder / semi-automatic - 1.3 - 12.7 m/min | Flex Feed™ 74

Top Features

Simple - Basic U/I streamlines operator setup
Rugged - Improved isolation & environmental protection...

Welding system wire feeder / semi-automatic - 1.3 - 12.7 m/min | Flex Feed™ 74

Top Features

Simple - Basic U/I streamlines operator setup
Rugged - Improved isolation & environmental protection with robust connection points allow for reliable operation in tough conditions
Modular - Modularity allows for customizable configurations
Gouge Kit – model includes an isolated stud designed for gouging operations
Digital meters - For set up, meters display your preset voltage and wire feed speed. During welding, actual voltage and amperage is displayed.

Welding system wire feeder / semi-automatic - 1.3 - 19 m/min | Power Feed® 84

Top Features

Advanced Interface – includes digital meters for actual and preset weld display and full weld sequence control including run-in, start,...

Welding system wire feeder / semi-automatic - 1.3 - 19 m/min | Power Feed® 84

Top Features

Advanced Interface – includes digital meters for actual and preset weld display and full weld sequence control including run-in, start, weld, burnback and crater parameters.
Eight User Memories – per drive for complete WPS recall.
PowerPath™ contactors – electrically isolate non-active wire drives and gouging stud.
Feed plate – can be located on either right or left side of the wire drive housing for easy integration into any work center.
Electrode input stud – mounted on the wire drive frame – protects the feed plate from misuse caused by pulling on the gun cable.

Soldering wire feeder / semi-automatic - 1.3 - 15.2 m/min | LN-8

The LN-8 wire feeder provides reliable performance and operation. It is ideal...

Soldering wire feeder / semi-automatic - 1.3 - 15.2 m/min | LN-8

The LN-8 wire feeder provides reliable performance and operation. It is ideal for shop or field operations. It has a robust and sturdy design that features a completely enclosed case and optimum control of wire feed speed and voltage at the wire feeder. It also has an available optional Burnback Kit.

Submerged arc welding system wire feeder - 2.5 - 10.2 m/min | LT-7 Tractor

The LT-7 Tractor is a self-propelled mechanized wire feeder, suited for the immersed arc process...

Submerged arc welding system wire feeder - 2.5 - 10.2 m/min | LT-7 Tractor

The LT-7 Tractor is a self-propelled mechanized wire feeder, suited for the immersed arc process with track system capabilities. Its compact design fits through small openings and confined spaces. It features a calibrated tractor drive that adjusts travel speeds from 6 to 70 inches per minute and a vertical head lift adjuster for adjusting electrical stick-out from 1/2 in. to 5 in.

Submerged arc welding system wire feeder - max. 12.7 m/min | MAXsa 29

The MAXsa 29 Feed Head controller from Lincoln Electric is designed for a submersible arc system....

Submerged arc welding system wire feeder - max. 12.7 m/min | MAXsa 29

The MAXsa 29 Feed Head controller from Lincoln Electric is designed for a submersible arc system. It features a 32VDC permanent magnet with an excellent torque motor that delivers an abundance of traction to push up to 7/32" diameter solid wire with a standard adjustable wire straightener.

This device is certified for resistance in harsh ambient environments.
{{item.name}}