+7 (812) 645-08-06
Induction heating equipment
select brand
Vertical furnace / for fire resistance testing / laboratory - MERINGAGE
The Meringange is a conical furnace from Eraly that is designed to measure the expansion capacity of polyvinyl chloride (PVC) tubes when their heated. It does its measuring...
Vertical furnace / for fire resistance testing / laboratory - MERINGAGE
The Meringange is a conical furnace from Eraly that is designed to measure the expansion capacity of polyvinyl chloride (PVC) tubes when their heated. It does its measuring...
Induction heater - BALTECH HI-1604
The Baltech Hi-1604 model is manufactured by Baltech GmbH, and is an induction heater that...
Induction heater - BALTECH HI-1604
The Baltech Hi-1604 model is manufactured by Baltech GmbH, and is an induction heater that has been specifically developed to be used in heating components before they are mounted. The components includes rings and bearings. The model has a cover as a means of safe and clean heating of the workpieces. The cover is also used to guard the workpieces from damage.
Bearing induction heater - BALTECH HI-1610
The BALTECH HI-1610 is a lightweight, compact induction heater with electronic control. Its maximum bearing weight is 12-kg, and inner and outer diameters are 14-mm and 210-mm respectively. The...
Bearing induction heater - BALTECH HI-1610
The BALTECH HI-1610 is a lightweight, compact induction heater with electronic control. Its maximum bearing weight is 12-kg, and inner and outer diameters are 14-mm and 210-mm respectively. The heater’s height is 100-mm and weight is 70-mm. The small size of the heater allows for it to be easily carried over to a place of maintenance or service companies. For transportation, it’s carried in a portable case.
The induction heating of rings, parts, and bearings can be conducted both in vertical and horizontal position. Automatic demagnetization of the parts is provided by the heater after heating to the defined temperature. The bearings can also be heated without a time limit. The frequency is 50-Hz and the voltage/current is 220/6 A.
The induction heating of rings, parts, and bearings can be conducted both in vertical and horizontal position. Automatic demagnetization of the parts is provided by the heater after heating to the defined temperature. The bearings can also be heated without a time limit. The frequency is 50-Hz and the voltage/current is 220/6 A.
Bearing induction heater - BALTECH HI-1612
The BALTECH HI-1612 is an induction heater specifically used for bearing. The device consist of two built-in magnetic inductors placed on a single housing. Because of this, it can be heated to two...
Bearing induction heater - BALTECH HI-1612
The BALTECH HI-1612 is an induction heater specifically used for bearing. The device consist of two built-in magnetic inductors placed on a single housing. Because of this, it can be heated to two...
Bearing induction heater - BALTECH HI-1630
BALTECH HI-1630 is small in size and can provide high performance due to its light weight. It is a cost effective induction heater with an electronic control. It is easy to mount with the rolling element bearings. It is a multi-purpose and popular model for repair of manufacturing equipment...
Bearing induction heater - BALTECH HI-1630
BALTECH HI-1630 is small in size and can provide high performance due to its light weight. It is a cost effective induction heater with an electronic control. It is easy to mount with the rolling element bearings. It is a multi-purpose and popular model for repair of manufacturing equipment and technical services. The induction heating can be performed in the vertical and horizontal direction. Electronic indication makes it easy to configure according to the required heating temperature.
The heating process may take several minutes and after approaching the defined temperature, automatic demagnetization of frenzied bearings and parts occurs. The weight of compact induction heater is 25 kg and the weight of intended heat parts is almost 55 kg with 480 mm maximum outer diameter. An inner ring is required to heat for fast and reliable bearing mounting. Keep it in mind that a closed bearing with oil should be kept away from heat, because the oil will flow out and the bearing will go dry. The bearing mounting with the induction heater BALTECH HI-1630 is managed by a microprocessor and temperature sensor.
The heating process may take several minutes and after approaching the defined temperature, automatic demagnetization of frenzied bearings and parts occurs. The weight of compact induction heater is 25 kg and the weight of intended heat parts is almost 55 kg with 480 mm maximum outer diameter. An inner ring is required to heat for fast and reliable bearing mounting. Keep it in mind that a closed bearing with oil should be kept away from heat, because the oil will flow out and the bearing will go dry. The bearing mounting with the induction heater BALTECH HI-1630 is managed by a microprocessor and temperature sensor.
Bearing induction heater - BALTECH HI-1633
Multipurpose induction heater BALTECH HI-1633 is an exclusive product of BALTECH with three yokes and an electronic control. It is a unique development with no analogues...
Bearing induction heater - BALTECH HI-1633
Multipurpose induction heater BALTECH HI-1633 is an exclusive product of BALTECH with three yokes and an electronic control. It is a unique development with no analogues and provides three-fold reduction in time of heating and price less than three similar heaters as it is possible to heat three parts simultaneously.
Heating of bearings, half-couplings, rings and parts can be performed both horizontally and vertically and induction heating can be conducted on one, two or three yokes simultaneously. 1-2-3 switch can be employed to set active yokes and thermal imaging cameras BALTECH TR-01100 can be additionally used to control heating temperature on yokes.
Heating of bearings, half-couplings, rings and parts can be performed both horizontally and vertically and induction heating can be conducted on one, two or three yokes simultaneously. 1-2-3 switch can be employed to set active yokes and thermal imaging cameras BALTECH TR-01100 can be additionally used to control heating temperature on yokes.
Custom induction coil
Fluxtrol, Inc. offers a custom-made induction coil, that is applicable for Case Harden S-Cam and Shaft. This induction coil is...
Custom induction coil
Fluxtrol, Inc. offers a custom-made induction coil, that is applicable for Case Harden S-Cam and Shaft. This induction coil is especially designed to be an effective solution for problems like extended cycle times, and loss of pattern control. The power requirement for the unit is 150 kW (135 kW in use), and 3–10 kHz (7 kHz in use).
Features of the induction coil include an optimized coil design via computer simulation, and Fluxtrol to reduce cycle time with pattern improvement.
Features of the induction coil include an optimized coil design via computer simulation, and Fluxtrol to reduce cycle time with pattern improvement.
Optimized induction coil
This optimized induction coil is developed by Fluxtrol, Inc. It is specifically designed...
Optimized induction coil
This optimized induction coil is developed by Fluxtrol, Inc. It is specifically designed to cater applications in the Crank Shaft Hardening Diesel Engines. This coil has a power supply of 300 kW in a frequency of 3 kHz. Instead of using a lamination, it uses a fluxtrol. Instead of using a copper tube, this component also used a CNC head.
Concentrator
The Fluxtrol Concentrator is an induction heating product specifically designed to aid in processes involving...
Concentrator
The Fluxtrol Concentrator is an induction heating product specifically designed to aid in processes involving induction oils. The magnetic, mechanical, and thermal properties must be considered when applying the product. The electrical stability and insulation properties must also be considered. Furthermore, the most common method of attaching the Flustor Concentrator is through a durable and chemical-resistant adhesive bonding.
Concentrator - AlphaForm
The AlphaForm concentrator is manufactured by Fluxtrol, Inc and is handy and moldable, which can also...
Concentrator - AlphaForm
The AlphaForm concentrator is manufactured by Fluxtrol, Inc and is handy and moldable, which can also adapt to tube style coils and can be used with almost any induction coil geometry at any induction frequency. It is cost-efficient, since any part of the concentrator that is unused is not wasted and can be stored for future use. In addition, the AlphaForm saves heat time and energy used by 20% to 50%.