+7 (812) 645-08-06
Mist eliminators
select brand
Mist eliminator - KnitMesh™
Our KnitMesh™ mist eliminators have an excellent track record as a low...
Mist eliminator - KnitMesh™
Our KnitMesh™ mist eliminators have an excellent track record as a low cost, highly versatile and efficient method of removing liquid entrainment from gas streams. They can be used for a broad range of gas/liquid separation problems, and can be easily tailored to suit most vessel shapes and sizes.
Mist eliminator - KnitMesh™ 9797
Sulzer KnitMesh 9797 Mist Eliminator technology allows you to optimize designs to meet the most challenging performance requirements.
Mist eliminator - KnitMesh XCOAT™
Sulzer has launched a completely new KnitMesh mist eliminator for...
Mist eliminator - KnitMesh XCOAT™
Sulzer has launched a completely new KnitMesh mist eliminator for corrosive media. Our new Sulzer KnitMesh product line, XCOAT™, is based on a metal wire that is coated with 100% pure PTFE. This new material is unique and available exclusively at Sulzer.
Mist eliminator - Mellachevron™
Sulzer Mellachevron™ mist eliminators are high-capacity separators constructed...
Mist eliminator - Mellachevron™
Sulzer Mellachevron™ mist eliminators are high-capacity separators constructed as banks of parallel, chevron profiles that cause the gas to change direction several times. The momentum forces entrained liquid droplets to impinge on the vane surfaces where they form a liquid film and drain.
Mist eliminator - MKS Multi Cassette™
The patented Sulzer MKS Multi Cassette™ mist eliminator combines axial cyclonic and cross-flow separation technology to create an efficient, high-capacity separator.
Mist eliminator - Becofil
'Becofil' Candle Demisters, commonly referred to as Candle Filters - are intended primarily for the removal of very fine mist particles of less than 2 microns. A combination of impingement for removing greater than 1-2 microns and diffusion for finer particles where Brownian motion becomes increasingly predominant.
Each filter is composed of...
Each filter is composed of...
Mist eliminator - Becofil
'Becofil' Candle Demisters, commonly referred to as Candle Filters - are intended primarily for the removal of very fine mist particles of less than 2 microns. A combination of impingement for removing greater than 1-2 microns and diffusion for finer particles where Brownian motion becomes increasingly predominant.
Each filter is composed of millions of fibres, and although the efficiency of each individual fiber is low, the cumulative effect is very high. Low approach velocities are necessary in order not to mask the diffusion velocities associated with Brownian movement. Candle filters are installed vertically and gases pass horizontally through the filter wall, the trapped particles coalescing and draining through the filter bed.
The continuing development of 'Becofil' Candle Demisters coupled with the experience gained from hundreds of applications worldwide, enables Begg Cousland to offer a range of filters to conform to the varying requirements of industry in terms of capacity, pressure loss and mist removal efficiency.
'Becofil' Candle Demisters will help to eliminate visible stack plumes, meet today’s more stringent air pollution regulations and recover more lost products from processes. It will also help to remove pollutants, which may cause corrosion further downstream resulting in costly premature replacement of equipment and maintenance down time.
Each filter is composed of millions of fibres, and although the efficiency of each individual fiber is low, the cumulative effect is very high. Low approach velocities are necessary in order not to mask the diffusion velocities associated with Brownian movement. Candle filters are installed vertically and gases pass horizontally through the filter wall, the trapped particles coalescing and draining through the filter bed.
The continuing development of 'Becofil' Candle Demisters coupled with the experience gained from hundreds of applications worldwide, enables Begg Cousland to offer a range of filters to conform to the varying requirements of industry in terms of capacity, pressure loss and mist removal efficiency.
'Becofil' Candle Demisters will help to eliminate visible stack plumes, meet today’s more stringent air pollution regulations and recover more lost products from processes. It will also help to remove pollutants, which may cause corrosion further downstream resulting in costly premature replacement of equipment and maintenance down time.
Mist eliminator oil - 0.3 micron
High speed rotating equipment such as turbines and compressors require large amounts of oil for lubrication and cooling. Much of the generated oil mist and vapor will escape...
Mist eliminator oil - 0.3 micron
High speed rotating equipment such as turbines and compressors require large amounts of oil for lubrication and cooling. Much of the generated oil mist and vapor will escape...
Mist eliminator oil - 0.05 - 05 micron
The emissions from the vent of a lube oil tank are difficult to eliminate because the majority of oil mist droplets fall in the range of less than 1 micron in...
Mist eliminator oil - 0.05 - 05 micron
The emissions from the vent of a lube oil tank are difficult to eliminate because the majority of oil mist droplets fall in the range of less than 1 micron in diameter. Oil mist control technologies that have been used in the past include electrostatic precipitators (ESPs), rotating drums, packed fiber beds and mesh pads. The manufacturers of these technologies all claim at lest 95% efficiency, some even go as high as 99% efficiency.
While all of these types of technologies are satisfactory for removing large droplets of oil, they are not adequate enough for removing sub-micron particles 0.5 microns and smaller.
While all of these types of technologies are satisfactory for removing large droplets of oil, they are not adequate enough for removing sub-micron particles 0.5 microns and smaller.