+7 (812) 645-08-06
Extraction arms
select brand
Welding fume extractor extraction arm - PR series
The Local Extractor of the PR Series is an ideal extractor suitable for industrial environments. It is designed using a modern technology and...
Welding fume extractor extraction arm - PR series
The Local Extractor of the PR Series is an ideal extractor suitable for industrial environments. It is designed using a modern technology and new materials. This extractor features a good positional stability and easy maneuverability. It is equipped with a hood design recommended for welding smoke and other hot pollutants. It has the capacity to execute improved performance using the Coanda effect.
The PR Extractors is manufactured based on the basic principles of Fumex. It has an outside arm support and comes with different hose dimensions.
The PR Extractors is manufactured based on the basic principles of Fumex. It has an outside arm support and comes with different hose dimensions.
Welding fume extractor extraction arm - 1.5 - 4 m | RX series
The RX series by Fumex AB is a welding fume extractors extraction arm which is designed for welding station having a gas...
Welding fume extractor extraction arm - 1.5 - 4 m | RX series
The RX series by Fumex AB is a welding fume extractors extraction arm which is designed for welding station having a gas springs. It comes with rolled steel tubes having a smooth internal surfaces which creates a less pressure loss. The unit can be easily moves having a high positional stability even at its full extension. The gas spring is then used to balance the weight of the arm. The unit is equipped with a flexible suction nozzle that can rotate 360˚ and 90˚ angle.
Welding fume extractor extraction arm - 4.5 - 8.5 m | RZX series
The RZX Series is a local extractor integrated with an extended reach meant for several welding tasks and applications. It is made available...
Welding fume extractor extraction arm - 4.5 - 8.5 m | RZX series
The RZX Series is a local extractor integrated with an extended reach meant for several welding tasks and applications. It is made available with a length of 4.5, 6.5 and 8.5 mm incorporated with several steel tubes in a smooth internal surface which makes low pressure consumption. It is considered as a versatile, horizontal dual-joint device made to be used for a wide working rate. It may simply be operated in a very high positional stability rate even at full extension. It is also built with external supporting arms with a very low risk of blockage.
Telescopic extraction arm - TEX series
This telescopic local extractor is designed for confined workplaces. The compact extractor is suitable for welding workbenches and booths. The gas spring balances the arm...
Telescopic extraction arm - TEX series
This telescopic local extractor is designed for confined workplaces. The compact extractor is suitable for welding workbenches and booths. The gas spring balances the arm weight, while the flexible suction nozzle can rotate through 360 degrees, being positioned at a 90 degree angle. The TEX is designed based on the Fumex basic principles.
The external arm supports facilitate natural and direct airflow, which means a minimal pressure drop and a low risk of blockage. The extractor hood comes in diameters between 100 and 125 mm, while the hose quality is in accordance with field applications. This item is supplied pre-assembled, which makes installation easier.
The external arm supports facilitate natural and direct airflow, which means a minimal pressure drop and a low risk of blockage. The extractor hood comes in diameters between 100 and 125 mm, while the hose quality is in accordance with field applications. This item is supplied pre-assembled, which makes installation easier.
Welding fume extractor extraction arm - PR Atex series
The PR ATEX is a local extractor utilized in workplaces which enables the safe handling of explosive gases and dust. It has a grounded structure and complies with the ATEX directive 94/9/EC category...
Welding fume extractor extraction arm - PR Atex series
The PR ATEX is a local extractor utilized in workplaces which enables the safe handling of explosive gases and dust. It has a grounded structure and complies with the ATEX directive 94/9/EC category 2 for dust and gases. These requirements include zones 1 and 21 with EX II 2 GD marking.
Featuring the same design and qualities as PR, it is exceptionally easy to maneuver and offers high positional stability. It has an optimally designed hood for extremely high capture and extraction efficiency. Based on Fumex's basic principles for ATEX environments, the PR ATEX includes external arm supports, has a low risk of blockage, and offers a minimal pressure drop due to its natural and direct airflow. It has varying hose dimensions. It comes already assembled after full testing.
Featuring the same design and qualities as PR, it is exceptionally easy to maneuver and offers high positional stability. It has an optimally designed hood for extremely high capture and extraction efficiency. Based on Fumex's basic principles for ATEX environments, the PR ATEX includes external arm supports, has a low risk of blockage, and offers a minimal pressure drop due to its natural and direct airflow. It has varying hose dimensions. It comes already assembled after full testing.
Welding fume extraction arm - max. 1 500 m³/h | BM series
Product Description.
They are especially used for welding fumes and for all workings which create...
They are especially used for welding fumes and for all workings which create...
Welding fume extraction arm - max. 1 500 m³/h | BM series
Product Description.
They are especially used for welding fumes and for all workings which create exhalations and smokes.
Arms can be placed on really different plants with different kinds of filters according to the pollutant to treat.
Suction arms are the final element of a suction plant which normally is composed of: filter, electric fan and the relative connection lines.
They are especially used for welding fumes and for all workings which create exhalations and smokes.
Arms can be placed on really different plants with different kinds of filters according to the pollutant to treat.
Suction arms are the final element of a suction plant which normally is composed of: filter, electric fan and the relative connection lines.
Bench-top extraction arm / flexible / for solder fume extractors - 75 mm | Plenum Cowl
Designed to capture fumes horizontally...
Bench-top extraction arm / flexible / for solder fume extractors - 75 mm | Plenum Cowl
Designed to capture fumes horizontally across the workbench to keep fumes away from the workers breathing zone.
Bench-top extraction arm / flexible - 75 mm | Conical Cowl
Designed to capture fumes horizontally...
Bench-top extraction arm / flexible - 75 mm | Conical Cowl
Designed to capture fumes horizontally across the workbench to keep fumes away from the workers breathing zone.
Flexible extraction arm / for smoke / dust - 38 mm
With 50mm Kit for Digital Fume Extractors
This...
This...
Flexible extraction arm / for smoke / dust - 38 mm
With 50mm Kit for Digital Fume Extractors
This kit contains a 38mm stainless steel fume extraction arm which can be attached to the workbench and then to the extraction system.
This kit contains a 38mm stainless steel fume extraction arm which can be attached to the workbench and then to the extraction system.