+7 (812) 645-08-06
Surge protection devices: surge arresters for telecommunication networks
select brand
Telephone surge arrester / for data and telecommunication lines / ground / network - ProtectNet® series
The ProtectNet family of stand-alone surge suppressors protects individual data lines,...
Telephone surge arrester / for data and telecommunication lines / ground / network - ProtectNet® series
The ProtectNet family of stand-alone surge suppressors protects individual data lines, including telephones and the like. Caused by surges and spikes traveling along unprotected data lines leading to dismay. Upon insertion of this device in your system prevents back door surges from wasting your productivity and giving you more savings.
Data and telecommunication line surge arrester - max. 100 Mbps, 24 V, 1.5 A | Edco LCDP
The Edco LCDP is a data circuit that makes use of a special solid-state silicone...
Data and telecommunication line surge arrester - max. 100 Mbps, 24 V, 1.5 A | Edco LCDP
The Edco LCDP is a data circuit that makes use of a special solid-state silicone avalanche suppression technology that enables it to accommodate data rates with up to 100 Mbps in speed while protecting 8-wire, low-voltage data circuits. Its two RJ-45 jacks makes for the units quick and easy installation.
DIN rail surge arrester / for telecom applications - 10 kA | DIN T series
DIN-ADSL is the series of devices for discharging transient overvoltages induced in ADSL telephone lines, within the DIN-T range. In accordance...
DIN rail surge arrester / for telecom applications - 10 kA | DIN T series
DIN-ADSL is the series of devices for discharging transient overvoltages induced in ADSL telephone lines, within the DIN-T range. In accordance with IEC 61643-21. DIN rail monobloc format.
Suitable for the protection of communications equipment connected to ADSL lines. By their nature, they are highly exposed induced transient overvoltages (surges) with meteorological activity.
Protection of a telephone pair.
Discharge capacity with an 8/20 μs waveform: 10 kA.
The DIN-T range also provides models for the protection of PP lines.
Suitable for the protection of communications equipment connected to ADSL lines. By their nature, they are highly exposed induced transient overvoltages (surges) with meteorological activity.
Protection of a telephone pair.
Discharge capacity with an 8/20 μs waveform: 10 kA.
The DIN-T range also provides models for the protection of PP lines.
Data and telecommunication line surge arrester - 10 kA | MCH series
Cirprotec's MCH-PP is basically a surge protection device (SPD) and is used for shunting transitory surges induced in PP telephone lines, within the MCH range. The product is fabricated as a plug-play concept and...
Data and telecommunication line surge arrester - 10 kA | MCH series
Cirprotec's MCH-PP is basically a surge protection device (SPD) and is used for shunting transitory surges induced in PP telephone lines, within the MCH range. The product is fabricated as a plug-play concept and is suited for protection of communications equipment connected to PP lines. The technology is built in compliance to IEC 61643-21. The prime application is shielding the equipment wherever exposed to induced transient over-voltages (surges) associated with meteorological activity.
It also aids in protecting telephone pair. The device is compact, sleek and requires no installation. The discharge capacity with an 8/20 μs waveform is approximately 10 kA and can be connected directly to the equipment to be protected via RJ45 connectors. Other products in MCH range also provide protection of ADSL y ISDN lines.
It also aids in protecting telephone pair. The device is compact, sleek and requires no installation. The discharge capacity with an 8/20 μs waveform is approximately 10 kA and can be connected directly to the equipment to be protected via RJ45 connectors. Other products in MCH range also provide protection of ADSL y ISDN lines.
Data and telecommunication line surge arrester - 2.4 - 15 kA | KPL-TPL
The CIRPOTEC TPL is a device used as ac surge protection for telecom and signalling networks or telephone pairs. This device is designed...
Data and telecommunication line surge arrester - 2.4 - 15 kA | KPL-TPL
The CIRPOTEC TPL is a device used as ac surge protection for telecom and signalling networks or telephone pairs. This device is designed with a transient and power frequency over-voltage protection. The TPL is highly exposed to the induced transient overvolatges that are correlated with the meteorological activities. This type of device has a discharge capacity waveform of 8/20 μs. It comes with two types that are CG models and SG models. The CG model has no protection stage, while the SG model has one protection stage.
DIN rail surge arrester / for signal transmission - 10 kA | DIN V-2C
The DIN V-2C is a series of devices for releasing transient overvoltages affected in RS 485/ 422 systems. With Insurance of a couple of wires...
DIN rail surge arrester / for signal transmission - 10 kA | DIN V-2C
The DIN V-2C is a series of devices for releasing transient overvoltages affected in RS 485/ 422 systems. With Insurance of a couple of wires and a 24V nominal voltage. The DIN V-2C extent additionally gives models to the security of signal kind Devicenet, RS 232, 4-20 mama, PROFIBUS PA, Binary indicators, KNX transport, Modbus, PTC. It is suitable for the insurance of instrumentation introduced in RS 485/422 systems. By their tendency, they are profoundly laid open to instigated transient overvoltages (surges) connected with meteorological action.
DIN rail surge arrester / for signal transmission - 10 kA, 24 V | DIN 24V-G
The CIRPOTEC DIN 24V-Gis a device used as a surge protection for telecom & signalling networks and measurement control....
DIN rail surge arrester / for signal transmission - 10 kA, 24 V | DIN 24V-G
The CIRPOTEC DIN 24V-Gis a device used as a surge protection for telecom & signalling networks and measurement control. This device is designed with a transient and power frequency over-voltage protection and is equipped with 4-wire protection. The DIN 24V-G is highly exposed to the induced transient overvolatges that are correlated with the meteorological activities. This type of device is applicable for RS 232 networks. It has a nominal voltage of 24V.