+7 (812) 645-08-06
Power contactors
select brand
Reversing contactor / electromechanical - XT series
XT IEC Series are designed for non-reversal as well as reversing of overload relays, and comes as part...
Reversing contactor / electromechanical - XT series
XT IEC Series are designed for non-reversal as well as reversing of overload relays, and comes as part of a set of accessories.
XT IEC Series are composed in enclosed structures which come in a variety of metallic as well as non-metallic enclosures. These structures house the circuit breakers as well as fuses, which are configured for North American as well European current flow magnitudes.
XT IEC Series are composed in enclosed structures which come in a variety of metallic as well as non-metallic enclosures. These structures house the circuit breakers as well as fuses, which are configured for North American as well European current flow magnitudes.
Definite purpose contactor - DP
Controlled by either automatic thermostat control or with the use of manual push button...
Definite purpose contactor - DP
Controlled by either automatic thermostat control or with the use of manual push button interface, the Definite Purpose starters are specifically designed for today's heating, ventilation, air conditioning and refrigeration (HVAC) industry. These are used in and can support most of the industry's various applications which makes it the best.
Lighting contactor
These state of the art Lighting Contactors is specially manufactured by Eaton and are specifically built to ensure a well-protected and favorable means for local or even remote...
Lighting contactor
These state of the art Lighting Contactors is specially manufactured by Eaton and are specifically built to ensure a well-protected and favorable means for local or even remote switching of tungsten otherwise known as incandescent filament as well as ballast either fluoresecent or mercury arc lamp loads. This exemplary device is remarkably built for other types of loads as well including low pressure and high pressure sodium lamp loads in addition to other non-motor otherwise known as resistive loads. These high quality Lighting Contactors provide groundbreaking versatility when in comes to application, user-friendly configurations along with efficient perfomance during oprations.
Vacuum contactor - 600 - 1 500 V
Vacuum starters are devices rated up to 600V AC by NEMA and 1,500V AC by special purpose as well as up to 1,500V AC by mining.
Each...
Each...
Vacuum contactor - 600 - 1 500 V
Vacuum starters are devices rated up to 600V AC by NEMA and 1,500V AC by special purpose as well as up to 1,500V AC by mining.
Each of these is examined and tested to various standards in order to determine whether it can serve its market. Usual application integrates a full voltage control of three-phase squirrel cage engines with primary supervision of wound rotor motors that have low voltage and circuit switching for capacitors. These devices are offered in three different classifications.
Each of these is examined and tested to various standards in order to determine whether it can serve its market. Usual application integrates a full voltage control of three-phase squirrel cage engines with primary supervision of wound rotor motors that have low voltage and circuit switching for capacitors. These devices are offered in three different classifications.
Three-phase contactor / vacuum - 50 - 60 Hz
Eatons Vacuum Contactors are designed for dominant three-phase, 50/60 Hz, AC motors. These contactors are...
Three-phase contactor / vacuum - 50 - 60 Hz
Eatons Vacuum Contactors are designed for dominant three-phase, 50/60 Hz, AC motors. These contactors are built with many versions for particular or generic contactor according to the approved ratings. These applications include primary management of low voltage wound rotor motors, full voltage management of three-phase cage motors, and circuit switch for low voltage capacitors for better power issues.
Miniature contactor - max. 5.5 kW | CI 5 series
These CI-5 minicontactors are ensuring additional protection against electric shock made by the secured space intended for the live parts while being installed...
Miniature contactor - max. 5.5 kW | CI 5 series
These CI-5 minicontactors are ensuring additional protection against electric shock made by the secured space intended for the live parts while being installed by the installers and maintenance personnel in accordance to the IEC 60947 edition 5 standard. It covers the power which ranges up to 5.5 kW and are obtainable and available for AC and DC coil voltages allowing dependable working with exceptionally low and high fluctuations of voltage. One of its features is being compact and ideal for applications with premium areas. It has an add-on additional timer, contact blocks and other further accessories that offers high flexibility.
Digital contactor - max. 63 A, max. 600 V | ECI series
The state-of the-art ECI Electronic contactors are strategically manufactured and designed for fast and challenging switching of loads like heaters, solenoids, transformers and...
Digital contactor - max. 63 A, max. 600 V | ECI series
The state-of the-art ECI Electronic contactors are strategically manufactured and designed for fast and challenging switching of loads like heaters, solenoids, transformers and motors. These units do not requires other additional components and are also DIN rail mountable, complete with heat sink. These electronic contactors are greatly compatible with and complement the ACI analogue power controller which is specifically created for accurate temperature and transformer control. The ACI is perfect on transformer controlled processes but is usually used as a controller for heaters and infrared lamps. These units meet the standard and are certified and approved and by international certifications.
Motor contactor / digital - 24 - 480 V, 15 A | MCI DOL series
The MCI-DOL motor contactors are engineered for fast and demanding three-phase AC switching in packaging machines, cranes...
Motor contactor / digital - 24 - 480 V, 15 A | MCI DOL series
The MCI-DOL motor contactors are engineered for fast and demanding three-phase AC switching in packaging machines, cranes and similar applications with frequent plugging, inching or jogging. They are also used in applications involving a high number of operating cycles.
RCI reversing contactors are designed for control of three-phase AC motors in conveyors or thread cutting machines when fast reversing or forwarding capabilities are required.
RCI reversing contactors are designed for control of three-phase AC motors in conveyors or thread cutting machines when fast reversing or forwarding capabilities are required.
Contactor - max. 75 kW, 400 V, 250 A | TeSys D series
The TeSys D Contactors and reversing contactors up to 75kW/400V and 250A/AC1 have AC/DC low-consumption...
Contactor - max. 75 kW, 400 V, 250 A | TeSys D series
The TeSys D Contactors and reversing contactors up to 75kW/400V and 250A/AC1 have AC/DC low-consumption DC control circuit. All of the starter types have reversing/no-reversing, star/delta by auto-transformer.
Spring terminal connectors with a screw clamp, Faston connector, ring-type connection and everlink terminal block are included. The direct mount is easy to use.
Spring terminal connectors with a screw clamp, Faston connector, ring-type connection and everlink terminal block are included. The direct mount is easy to use.
4-pole contactor - max. 450 kW, 400 V, 200 A | TeSys F series
This Contactors and reversing contactors up to 450 kW / 400 V and 200 A / AC1. Manufactured...
4-pole contactor - max. 450 kW, 400 V, 200 A | TeSys F series
This Contactors and reversing contactors up to 450 kW / 400 V and 200 A / AC1. Manufactured to peak reliability and security to ideally fit any industrial requirement and for any desired specification. Also allowing to prove its value by showing excellent durability destined to withstand any harsh environments.
Contactor - max. 5.5 kW, 400/415 V | TeSys K series
The TeSys K series is a complete range of reversing and non-reversing contactors...
Contactor - max. 5.5 kW, 400/415 V | TeSys K series
The TeSys K series is a complete range of reversing and non-reversing contactors up to 7.5kW 400/415V, with excellent performance/compactness ratio and seamless integration. The same options are available for all ratings (6A, 9A, 12A). The TeSys K series is used for 2.2kW, 4.5kW, 5.5kW in AC3 and AC4 applications.
Contactor - max. 2 750 A | TeSys B
The Schneiderr TeSys LC1-BL is a one-pole bar-mounted contactor. It handles AC-1 440V and...
Contactor - max. 2 750 A | TeSys B
The Schneiderr TeSys LC1-BL is a one-pole bar-mounted contactor. It handles AC-1 440V and 800 A with a coil of 48V DC. It is easy to use.
It is deal for infrastructure, industry, building, etc. and can control most motor types in normal/severe service conditions. It offers control of inductive, capacitive and resistive circuits.
It is deal for infrastructure, industry, building, etc. and can control most motor types in normal/severe service conditions. It offers control of inductive, capacitive and resistive circuits.
Modular contactor - 16 - 100 A | CT
The CT is a modular contractors that has a rating of 16 to 100 A with a numbered poles namely 1P+N for CT+ and 1P, 2P, 3P, 4P for CT. It strictly...
Modular contactor - 16 - 100 A | CT
The CT is a modular contractors that has a rating of 16 to 100 A with a numbered poles namely 1P+N for CT+ and 1P, 2P, 3P, 4P for CT. It strictly follows compliance standards of EN 669-2-1 for CT+; EN 60947-4-1, EN 61095 and CEI 1095 for CT. It has a lifetime switching operations range of 5,000,000 for CT+ and 200,000 for CT. and a daily switching operation of 5000 for CT+ and 100 for CT with standard and manually-operated contactors versions. Optional auxiliaries available are indication of state, interference filtering, dual control (impulse and/or latched) and time delay.