+7 (812) 645-08-06
Material testing machine: compression, tensile, bending, ...
select brand
Force measurement stand - 150 lbf | MT150
The MT150 Manual Force Tester (150 lbf / 660 N) made by Ametek is intended to supply a variety of cables for the purpose of interfacing with Chatillon® force gauges, force testers, printers...
Force measurement stand - 150 lbf | MT150
The MT150 Manual Force Tester (150 lbf / 660 N) made by Ametek is intended to supply a variety of cables for the purpose of interfacing with Chatillon® force gauges, force testers, printers...
Force measurement stand - 500 lbf | MT500
CHATILLON® presents MT500 Series manual force tester. The mechanical test stand is a user-friendly solution for measuring force up to 500 lbf (2.5kN) capacities. For controlling crosshead speed and travel, it is possible to equip the stand with a quick-action...
Force measurement stand - 500 lbf | MT500
CHATILLON® presents MT500 Series manual force tester. The mechanical test stand is a user-friendly solution for measuring force up to 500 lbf (2.5kN) capacities. For controlling crosshead speed and travel, it is possible to equip the stand with a quick-action...
Pneumatic force test bench - 500 lbf | TT series
The TT series is a tensile pneumatic tester. The device is used to measure the breaking strength of electrical leads, terminals, connectors, wire wraps, etc in places where intrinsic safety...
Pneumatic force test bench - 500 lbf | TT series
The TT series is a tensile pneumatic tester. The device is used to measure the breaking strength of electrical leads, terminals, connectors, wire wraps, etc in places where intrinsic safety is needed. The tester is operated by a clean and dry air with a 160 psig maximum air pressure. As a requirement for crimped and solder lugs, the tester meets the MIL-T-7928 (ASG). The device can be used in tensile or compression testing. Due to its rapid test speed, it can be applicable to production line testing, incoming inspection testing or R&D laboratory.
The test stroke of the series is 6 inches. The speed can be controlled as low as 0.1 inch per minute. The series can be mounted to the Chatillon DF Series force gauges.
The test stroke of the series is 6 inches. The speed can be controlled as low as 0.1 inch per minute. The series can be mounted to the Chatillon DF Series force gauges.
Traction test bench / compression / vertical / motorized - 110 lbf | LTCM100 series
The LTCM100 Series is a line of motorized test stands manufactured by Chatillon®. The series is a cost-effective motorized tester enhanced for product floor operations.
When integrated with...
When integrated with...
Traction test bench / compression / vertical / motorized - 110 lbf | LTCM100 series
The LTCM100 Series is a line of motorized test stands manufactured by Chatillon®. The series is a cost-effective motorized tester enhanced for product floor operations.
When integrated with...
When integrated with...
Traction test bench / compression / vertical / motorized - 550 lbf | LTCM500 series
The CHATILLON® LTCM500 Series comprises of motorized test stand. It is well suited for product floor operation. Testing system that is ideal for compression, tensile and peel testing operations...
Traction test bench / compression / vertical / motorized - 550 lbf | LTCM500 series
The CHATILLON® LTCM500 Series comprises of motorized test stand. It is well suited for product floor operation. Testing system that is ideal for compression, tensile and peel testing operations...
Sheet testing machine - 1000 kN
Erichsen Testing machines are the result of exceptional engineering, with deep emphasis on quality control, perfection and innovation. The outstanding machines are geared to deliver long-lasting durability, efficiency and solidity in performance, combined with virtually negligible maintenance requirements.
The machines are manufactured in compliance...
The machines are manufactured in compliance...
Sheet testing machine - 1000 kN
Erichsen Testing machines are the result of exceptional engineering, with deep emphasis on quality control, perfection and innovation. The outstanding machines are geared to deliver long-lasting durability, efficiency and solidity in performance, combined with virtually negligible maintenance requirements.
The machines are manufactured in compliance with universally accepted standards in testing expertise and set new standards in precision technology. They are delivered with the Erichsen Manufacturer's Certificate M, a well-endorsed mark of quality assurance and testing reliability. The certification confirms to DIN 55 350, section 18 while the testing machines themselves confirm to DIN EN ISO 9000 criteria for monitoring, testing and quantification. The Certificate M, issued by the company, guarantees full accountability and incorporates a product identification feature that allows easy traceability.
All machines are delivered after being subjected to stringent quality checks for guarantee of functions and metered parameters that the machines claim to deliver, by using calibrated and certified evaluating equipment. The results of the checks are recorded in an inspection report. Another service that the company provides is the refurbishing and consequent re-certification of used deep-drawing tools.
Customized options are available, as are one-to-one consulting facilities.
The machines are manufactured in compliance with universally accepted standards in testing expertise and set new standards in precision technology. They are delivered with the Erichsen Manufacturer's Certificate M, a well-endorsed mark of quality assurance and testing reliability. The certification confirms to DIN 55 350, section 18 while the testing machines themselves confirm to DIN EN ISO 9000 criteria for monitoring, testing and quantification. The Certificate M, issued by the company, guarantees full accountability and incorporates a product identification feature that allows easy traceability.
All machines are delivered after being subjected to stringent quality checks for guarantee of functions and metered parameters that the machines claim to deliver, by using calibrated and certified evaluating equipment. The results of the checks are recorded in an inspection report. Another service that the company provides is the refurbishing and consequent re-certification of used deep-drawing tools.
Customized options are available, as are one-to-one consulting facilities.
Ear measuring device for cupping deep drawing test - Model 126
The 126, manufactured by Erichsen, is an ear measuring instrument that is ideally...
Ear measuring device for cupping deep drawing test - Model 126
The 126, manufactured by Erichsen, is an ear measuring instrument that is ideally used for quick measurement of ears made on cylindrical cu[s with a diameter of 15-50mm. The height and valleys of the ears are measured and shown as a percentage and in millimeters by simply placing the cup on the location of the instrument.
Sheet testing machine - Model 161
This is an electro-hydraulical setup for cupping tests. It offers a maximum drawing force of 1000 kN and a corresponding infinitely variable blank holder. The blank holder is proportionally controlled by a pressure regulating valve with clamping stroke of 180 mm. The drawing speed (200 mm/min....
Sheet testing machine - Model 161
This is an electro-hydraulical setup for cupping tests. It offers a maximum drawing force of 1000 kN and a corresponding infinitely variable blank holder. The blank holder is proportionally controlled by a pressure regulating valve with clamping stroke of 180 mm. The drawing speed (200 mm/min. max) is controlled by a proportional distributing valve with pressure balance. The maximum bulge diameter is 200 mm. A PLC provides automation and tests are carried out automatically till stoping at the piece's failure. Drawing force and blank holder force are given on analogue and digital outputs. The tester is equipped with independent bulge oil feeding and a tool change switch (key switch required for changing FLC test tools).
The machine has a mounting for drawing die and a sheet holder plate, according to Ord.-Nos. 1696.00.32 and 1697.00.32. There is an FLC ball punch (100 to 199 mm dia.) according to Ord.-Nos. 1698.00.32 and 1699.00.32.
The hydraulic cylinder, hydraulic aggregate, and control devices are contained in the body of the machine, which has a floor-mounted casing. The test area is protected by rigid, transparent lids.
The machine has a mounting for drawing die and a sheet holder plate, according to Ord.-Nos. 1696.00.32 and 1697.00.32. There is an FLC ball punch (100 to 199 mm dia.) according to Ord.-Nos. 1698.00.32 and 1699.00.32.
The hydraulic cylinder, hydraulic aggregate, and control devices are contained in the body of the machine, which has a floor-mounted casing. The test area is protected by rigid, transparent lids.
The formability of coating material testing machine - DIN ISO 1520 | 202 M
The 202M is a lacquer and paint testing machine manufactured by Erichsen. These tools are used for lacquers and paints with all types of...
The formability of coating material testing machine - DIN ISO 1520 | 202 M
The 202M is a lacquer and paint testing machine manufactured by Erichsen. These tools are used for lacquers and paints with all types of elasticity. The machine is provided with an electromotive drive, a laterally opened test head, and an electric installation for connecting the illumination of special microscopes. The unit is compliant with BS 3900:E4 , NF T 30-019, SIS 1841 77, and DIN EN ISO 1520. Accessories that may come with this device include a stereo microscope with holder and illumination, and electric special measuring device.
The formability of coating material testing machine - EN ISO, EURONORM, BS, NF, GOST, UNI, UNE | 242-Basic
242 Basic is a cupping and deep-drawing cup test material from Erichsen. It functions as an automatic test sequence, with a stop function at specimen failure. It is...
The formability of coating material testing machine - EN ISO, EURONORM, BS, NF, GOST, UNI, UNE | 242-Basic
242 Basic is a cupping and deep-drawing cup test material from Erichsen. It functions as an automatic test sequence, with a stop function at specimen failure. It is a cup test that uses a redrawing operation that includes sheet holder quick release for earing test on anisotropic cups and drawing punch. The unit is equipped with a tool change switch and PLC. This device is compliant of standards, such as NF T 30-019, SIS 1841 77, BS 3900:E4, DIN EN ISO 1520, and ISO 1520.
Other accessories applicable for this unit include the blanking die ring, blanking punch, deep drawing cup test tool B 1, and drawing dies for test tool B2 and C3.
Other accessories applicable for this unit include the blanking die ring, blanking punch, deep drawing cup test tool B 1, and drawing dies for test tool B2 and C3.